BravoCompanyUSA
05-22-2008, 04:54 PM
http://img.photobucket.com/albums/v445/bravocompanyusa/LaRueTactical.jpg
LaRue Tactical Handguard
Free-floating handguard with LaRue Locking System.
http://img.photobucket.com/albums/v445/bravocompanyusa/hg12.jpg
LaRue Tactical's two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, the LT Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures.
Comes complete with Allen wrench, vial of blue Locktite and Instructions.
Features:
· CNC-machined out of aluminum
· Integral QD sling-swivel sockets on both sides
· Hard coat anodized, with T-Numbers
· Low-profile bottom and side rails
· Special rail cuts allow both mil-issue and standard rail covers
Sizes:
7.0" Handguard LT15-7
9.0" Handguard LT15-9
10.0" Handguard LT15-10
11.0" Handguard LT15-11FL (full length)
11.0" Handguard LT15-11 SBRS (GOOSENECK)
12.0" Handguard LT15-12 Rifle Length
13.2" Handguard LT15-13.2
http://www.bravocompanyusa.com/Free-Floating-Tactical-Handguards-s/54.htm
LaRue Tactical Optic Mounts
Adjustable QD Levers and a Repeat Zero.
http://img.photobucket.com/albums/v445/bravocompanyusa/LaRueTacticalSPR-ELT1391-2.jpg
SPR / M4 Scope Mount QD LT-104 with 1-inch rings
SPR / M4 Scope Mount QD LT-104 with 30mm rings
SPR-E Scope Mount QD LT-139 with 1-inch rings
SPR-E Scope Mount QD LT-139 with 30mm rings
http://img.photobucket.com/albums/v445/bravocompanyusa/LaRueLT129Cantilever-4.jpg
Cantilever CompM Aimpoint Mount LT129
CompM Aimpoint Standard Mount LT150
CompM Aimpoint RASII Mount LT152
QD Pivot Mount LT349-30 3X Aimpoint
http://img.photobucket.com/albums/v445/bravocompanyusa/LaRueLT110-3.jpg
EOTech QD Mount LT110
ACOG Mount QD LT-100 (4XDOS)
http://www.bravocompanyusa.com/LaRue-Tactical-Optic-Mounts-s/93.htm
Any much more Quality LaRue Tactical Gear . . .
Rear BUIS QD LT-103
Low Profile Gas Block LT-202 for .750" barrels
Low Profile Gas Block LT-202 for .625" barrels
STEALTH Upper Receiver Assembly (M4 Feedramps) LT-007 M4
QD Bipod Mount LT-130
http://www.bravocompanyusa.com/SearchResults.asp?mfg=LaRue+Tactical
Thanks for looking!
LaRue Tactical Handguard
Free-floating handguard with LaRue Locking System.
http://img.photobucket.com/albums/v445/bravocompanyusa/hg12.jpg
LaRue Tactical's two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, the LT Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures.
Comes complete with Allen wrench, vial of blue Locktite and Instructions.
Features:
· CNC-machined out of aluminum
· Integral QD sling-swivel sockets on both sides
· Hard coat anodized, with T-Numbers
· Low-profile bottom and side rails
· Special rail cuts allow both mil-issue and standard rail covers
Sizes:
7.0" Handguard LT15-7
9.0" Handguard LT15-9
10.0" Handguard LT15-10
11.0" Handguard LT15-11FL (full length)
11.0" Handguard LT15-11 SBRS (GOOSENECK)
12.0" Handguard LT15-12 Rifle Length
13.2" Handguard LT15-13.2
http://www.bravocompanyusa.com/Free-Floating-Tactical-Handguards-s/54.htm
LaRue Tactical Optic Mounts
Adjustable QD Levers and a Repeat Zero.
http://img.photobucket.com/albums/v445/bravocompanyusa/LaRueTacticalSPR-ELT1391-2.jpg
SPR / M4 Scope Mount QD LT-104 with 1-inch rings
SPR / M4 Scope Mount QD LT-104 with 30mm rings
SPR-E Scope Mount QD LT-139 with 1-inch rings
SPR-E Scope Mount QD LT-139 with 30mm rings
http://img.photobucket.com/albums/v445/bravocompanyusa/LaRueLT129Cantilever-4.jpg
Cantilever CompM Aimpoint Mount LT129
CompM Aimpoint Standard Mount LT150
CompM Aimpoint RASII Mount LT152
QD Pivot Mount LT349-30 3X Aimpoint
http://img.photobucket.com/albums/v445/bravocompanyusa/LaRueLT110-3.jpg
EOTech QD Mount LT110
ACOG Mount QD LT-100 (4XDOS)
http://www.bravocompanyusa.com/LaRue-Tactical-Optic-Mounts-s/93.htm
Any much more Quality LaRue Tactical Gear . . .
Rear BUIS QD LT-103
Low Profile Gas Block LT-202 for .750" barrels
Low Profile Gas Block LT-202 for .625" barrels
STEALTH Upper Receiver Assembly (M4 Feedramps) LT-007 M4
QD Bipod Mount LT-130
http://www.bravocompanyusa.com/SearchResults.asp?mfg=LaRue+Tactical
Thanks for looking!