Which optic for a .22lr AR plinker?

[Phazuka]

1. 3x Aimpoint Magnifier/Aimpoint Clone
2. Eotech 552 Clone (will a QD base riser be necessary?
3. Sightmark (docter style) with LaRue base

Which one would be best for a .22lr plinker? Which ones line up with BUIS front and rear?

[thetallengineer]

I use an Aimpoint Comp C3 on my dedicated .22 upper. I bought it used and have been very pleased. I don't have BUIS on my practice rifle but I would imagine if I did, they would cowitness like they do on my normal AR.

[C4IGrant]

1. 3x Aimpoint Magnifier/Aimpoint Clone
2. Eotech 552 Clone (will a QD base riser be necessary?
3. Sightmark (docter style) with LaRue base

Which one would be best for a .22lr plinker? Which ones line up with BUIS front and rear?


I would also suggest you look at the SPOT optics. They have been reliable for us and have never had one returned.


C4

[m.adams]

Not to steal thunder from anyone, but while following the link at the top of the forums here I found this from Vortex (http://www.vortexoptics.com/riflescopes/view/vortex-strikefire-red-dot-riflescope-with-ar15-mount) - does anyone have any thoughts? It might be viable in this application as well...

[markm]

I've run a BSA $30 dollar cheapo Dot sight on my 10/22 for years. It's been beat on, and still works fine and holds zero. I wouldn't spend anything over $50-75 for a rimfire Dot sight.

[b_saan]

I'm running a Truglo TG8030B red dot on the GSG-5. It works fine and cost $39.

[Phazuka]

yeah, basically i'm just looking for a knockoff optic for a flat-top .22lr dedicated AR...so i won't need gucci gear, just something that looks tactigucci.

So, out of the 4 listed, which one would you suggest I go with?

1. 3x Aimpoint Magnifier/Aimpoint Clone
2. Eotech 552 Clone (will a QD base riser be necessary?
3. Sightmark (docter style) with LaRue base
4. ACOG 4x32 Clone

TIA

[wahoo95]

I went with 3x Aimpoint Magnifier/Aimpoint Clone

[Phazuka]

I went with 3x Aimpoint Magnifier/Aimpoint Clone

Post pics. I'm sure I seen your rifle at arfcom without a scope yet in that .22lr thread.

[wahoo95]

Here's a pic with the ClonePoint and twist off mount for the 3x Magnifier mount.

http://i210.photobucket.com/albums/bb244/a996hawk/IMG_2203.jpg

[Phazuka]

Here's a pic with the ClonePoint and twist off mount for the 3x Magnifier mount.

http://i210.photobucket.com/albums/bb244/a996hawk/IMG_2203.jpg

that's the one i ordered but with the specter length lightweight FF tube. i figure at 10 bucks for a brick of 500 22lr it will pay for itself after 30,000 rounds. :D

the gsg-5...about the same! fun times ahead.

[Perryguy]

Non-red dot option, any decent 3-9x scope. I have one on a 1022 and it is hard to miss!

[Phazuka]

Non-red dot option, any decent 3-9x scope. I have one on a 1022 and it is hard to miss!

I was thinking one of these suckers:

http://www.sunclear.biz/en_description/Vector%201.25-4.5x26E.jpg

or

http://www.scvector.biz/english/products_img/2007123130919.jpg

[wahoo95]

I have to admit I'm a little anxious to see that Vortex Strikefire released! Looks like it would be perfect for a plinker!

http://www.vortexoptics.com/riflescopes/view/vortex-strikefire-red-dot-riflescope-with-ar15-mount

[CarlosDJackal]

How about one of these?

http://www.cheaperthandirt.com/38983-47410-1455.html

http://www.natchezss.com/Optics.cfm?contentID=productDetail&prodID=XRTG8030B

http://www.cdnninvestments.com/advav3030red.html

http://www.cdnninvestments.com/bsa30reddosi.html

http://www.cdnninvestments.com/bec30reddotw.html

http://www.cdnninvestments.com/ar30reddotwm.html