View Full Version : VARIANT PIC THREADS, 6.5, 6.8, ETC.
LET'S SEE THEM!:D
Alexander Arms 16" SS barrel/bolt combo
Alexander Arms 6.5G upper and bolt carrier
Stag Arms lower w/CMT LPK-using for hunting, so it's fitting.
Vltor Clubfoot
Magpul MOE
Cavarms fatties
Armalite gas block
Leupold 1.5-5 SPR in Larue mount
BUIS?-more than likely GG&G
Wanted to keep it simple
http://img.photobucket.com/albums/v509/mark5pt56/084-1.jpg
http://img.photobucket.com/albums/v509/mark5pt56/087.jpg
http://img.photobucket.com/albums/v509/mark5pt56/085.jpg
http://img.photobucket.com/albums/v509/mark5pt56/086.jpg
I'll play too.
6.5 Grendel, 28" LW barrel (AMU profile) in Vltor VIS-3, Medesha adjustable gas block. Upper assembled by ADCO.
http://i15.photobucket.com/albums/a386/RatFink1961/Guns/IMG_1763.jpg
http://i15.photobucket.com/albums/a386/RatFink1961/Guns/IMG_1768.jpg
That looks like a tack driver! First Trijicon Lower I've seen, never knew they made them.
Mark
6.5 Grendel
http://www.visuality.com/personal/6_5/65_range.jpg
http://www.visuality.com/personal/6_5/65_range_can.jpg
That looks like a tack driver! First Trijicon Lower I've seen, never knew they made them.
Mark
I just got it together, going to shoot it for the first time this weekend. Trijicon has never made lowers, that was a special run done for us by Mega. Other than the logo, its a standard Gator lower.
Pic thread:
http://i15.photobucket.com/albums/a386/RatFink1961/Guns/IMG_1766.jpg
Let us know!
caporider, nice stick!
N.Franklin
10-08-08, 22:51
LWRC M6A2 6.8 SPC...I didnt have a chance to wipe it down yet, just got back from zeroing it in.:mrgreen:
http://img.photobucket.com/albums/v669/nf9648/DSC00871.jpg
http://img.photobucket.com/albums/v669/nf9648/DSC00873.jpg
http://img.photobucket.com/albums/v669/nf9648/DSC00876.jpg
http://img.photobucket.com/albums/v669/nf9648/DSC00877.jpg
http://img.photobucket.com/albums/v669/nf9648/DSC00891.jpg
http://img.photobucket.com/albums/v669/nf9648/DSC00901.jpg
http://img.photobucket.com/albums/v669/nf9648/DSC00906.jpg
http://i122.photobucket.com/albums/o251/thmpr464/CIMG3214.jpg
LWRC DMR 6.8
AA 16" GDMR
wild_wild_wes
10-11-08, 02:53
http://img.photobucket.com/albums/v509/mark5pt56/084-1.jpg
How many rounds does that short mag hold?
That's a 10 rounder. The 4 rounder(left most mag in pic) is the same size, the spring has the coils together at the bottom to limit compression.
I just got the 26 rounders, haven't had a chance to test them yet.
Gun Runner
10-15-08, 01:40
6.8 SPC Here
http://i25.photobucket.com/albums/c55/M855/DSC00149.jpg
http://i25.photobucket.com/albums/c55/M855/DSC00156.jpg
http://i25.photobucket.com/albums/c55/M855/DSC00151.jpg
CMMG Lower
JP Adj. Trigger w/ Stock Hammer Spring
Magpul CTR Stock
OD Hogue Grip
C Products SS Mags, Krylon'd OD
CMMG 16" M10 MedCon Upper
Daniel Defense Omega Rail
Magpul Rail Covers
LaRue LT104 Scope Mount
Leupold VXI 4-12x40; Butler Creek Caps
Surefire 9P Converted to 12v w/ Turbohead, often wears and XM Tailcap; VLTOR Mounts
KAC VFG
KAC Bipod Adapter
Harris Bipod
Still need $400 more to throw at it... :(
RDP SAR (http://www.tacticalnightvision.com/red_dot_sights.htm) Troy Industries Rear Battle Sight
OD Green Tango Down VFG
Spikes upper and lower
Kotonics 16" 11:1 SPECII barrel
PRI brake
YHM FF tube
Nikon glass
(now has CTR stock on it)
http://i209.photobucket.com/albums/bb27/angsniper/68SPC.jpg
Where to begin....
458 SOCOM Rifles...
http://i128.photobucket.com/albums/p177/458SOCOM/458BOLT.jpg
Accuracy with German Barrels in 458 SOCOM rifles is excellent ;)
http://i128.photobucket.com/albums/p177/458SOCOM/458Group.jpg
One more 458 SOCOM
http://i128.photobucket.com/albums/p177/458SOCOM/458SOCOMAR.jpg
one MORE 458 SOCOM and a piggie... thats not paint boys...
http://img373.imageshack.us/img373/9974/458catiiiyz1.jpg
http://img237.imageshack.us/img237/7017/458cactiifb4.jpg
http://img237.imageshack.us/img237/6858/458hogew0.jpg
450 Bushmaster, wacked some hog with it on Halloween (before I did the autopsy, gloves were needed ;))
http://img520.imageshack.us/img520/3217/hog3wd0.jpg
300 Whisper Project in the works, NOVESKE RIFLEWORKS makes the best stuff!
http://img143.imageshack.us/img143/1058/300wzp1.jpg
6.8 SPC takes a Pronghorn in WY this Sept.
http://img216.imageshack.us/img216/1790/10r2xe4.jpg
http://img510.imageshack.us/img510/3154/68lopedt5.jpg
Another 6.8 of mine going Prairie doggin... 50 took a back seat
http://img153.imageshack.us/img153/5637/ar1jx3.jpg
22 LR AR from Spikes, International Law edition...
http://img263.imageshack.us/img263/4796/intllawey0.jpg
http://img170.imageshack.us/img170/4350/spikes4na8.jpg
http://img147.imageshack.us/img147/3935/spikes1mn9.jpg
All for now... I got more coming soon ;)
Like that paint job on the AR Socom!
Like that paint job on the AR Socom!
Thanks, you should see my 3 gun/comp rigs ;) I don't mess around.
03humpalot
12-30-08, 14:16
Noveske Afghan upper on a stock Colt lower with UBR. Optics are the Leupold MK4 1.5-5x20mm MR/T M2 Illum reticle, Troy front wih XS tritium stripe and troy rear.
Carbine is holding under MOA to 250 meters with Hornady V-max and SSA enhanced frag combat loads. Need to slap my SPR lower on it to see what it can really do but its more than accurate/reliable enough for my needs (hunting/banging steel) as is.
Camo is Brownells Alumahyde II OD with Dark Earth overspray.
Plan to try some of the Accubonds when i get stateside next.
http://img296.imageshack.us/img296/7430/cimg0022tt7.jpg
http://img296.imageshack.us/img296/8560/cimg0028vb7.jpg
http://i235.photobucket.com/albums/ee107/ess45/CSC_01151.jpg
http://i235.photobucket.com/albums/ee107/ess45/DSC_0033_edited.jpg
Here's my 6.8
- Bushmaster 6.8 lower
- Blackthorne Upper, 6.8 SPC
- Midwest Industries Forend
- RRA Stand Alone Rear Sight Assembly
- RRA 6.8 Bolt Carrier Assembly
- Badger Tactical Charging Handle Latch
- Barrett 6.8 30RD mag
- some little xtras
http://img.photobucket.com/albums/v304/blackjeep04/Guns%20Archery%20Knives/Gun%20Collection/DSC00903.jpg
6.8 Sweetness.
http://pxw9080.googlepages.com/P5140528.JPG/P5140528-large.JPG
Punisher338
03-16-09, 20:53
My .458 Socom
http://i27.photobucket.com/albums/c191/loborojo338/Football139.jpg
WOA 16" barrel in 6.8.
http://i157.photobucket.com/albums/t48/DULLYJAY/100_4026.jpg
http://i157.photobucket.com/albums/t48/DULLYJAY/gunstuff003.jpg
Nothing super sexual. My 5.45 given to me by some friends. Shoots about as accurate as my LMT as far as I can tell. Very low recoiling.
http://i4.photobucket.com/albums/y103/steve--oh/mar09026.jpg
warchildindy
04-21-09, 15:34
16" DPMS 7.62x39 upper, on a Stag lower.
my 6.8
http://aggunner.com/pictures/firearms/ar/68acog2.jpg
Traditionally I have owned the standard 5.56 AR's from Colt to Bushmaster. I moved to the 5.45 because of ammo availability and after several outings to the range, am overly impressed. The accuracy is par to the 5.56 and I have experienced 1.5 to 2 inch groups at 200 yards with a maqnified 2moa Comp ML3, it probably could go tighter but a 2 inch group will just about bring pain to any target, besides I have only been out twice. That seems a little surprising to me, I am use to traditional reticles but with the 3x magnifier 200yds seems like 100yds. Its a good ride so far. No problems with the corrosive ammo issues. It takes 20 minutes extra to clean using the boiling water method, then normal cleaning with CLP bore foam and then standard break free. Not entirely finished, waiting on the DPMS crush washers from midway to replace the very ugly and useless peel washer that came with the comp/hider. Then the last item will be a LaRue Harris bidod. Pics are standard quality. Any comments are welcome.
http://i160.photobucket.com/albums/t172/thezunk/DSC00607.jpg
http://i160.photobucket.com/albums/t172/thezunk/DSC00604.jpg
Traditionally I have owned the standard 5.56 AR's from Colt to Bushmaster. I moved to the 5.45 because of ammo availability and after several outings to the range, am overly impressed. The accuracy is par to the 5.56 and I have experienced 1.5 to 2 inch groups at 200 yards with a maqnified 2moa Comp ML3, it probably could go tighter but a 2 inch group will just about bring pain to any target, besides I have only been out twice. That seems a little surprising to me, I am use to traditional reticles but with the 3x magnifier 200yds seems like 100yds. Its a good ride so far. No problems with the corrosive ammo issues. It takes 20 minutes extra to clean using the boiling water method, then normal cleaning with CLP bore foam and then standard break free. Not entirely finished, waiting on the DPMS crush washers from midway to replace the very ugly and useless peel washer that came with the comp/hider. Then the last item will be a LaRue Harris bidod. Pics are standard quality. Any comments are welcome.
http://i160.photobucket.com/albums/t172/thezunk/DSC00607.jpg
http://i160.photobucket.com/albums/t172/thezunk/DSC00604.jpg
A question on the corrosive ammo, couldnt you just spray the barrel down with windex and neutralize the corrosion then just bore brush and swab more than normal? I ask cause this is what i do with my AK. I know when i used to take Nagants to the range, the cheap military ammo was always corrosive, so thats what i did. Little squirt of windex on the way home and clean later.
BLACK LION
07-13-09, 14:34
Here is my 6.8 rig with the older lower configuration. I use this lower now strictly for shooting the .50... I will put up pics of my other 6.8 with the other lower as soon as I can get some.... Both built from SunDevil billet uppers and lowers
http://i466.photobucket.com/albums/rr26/BLACK_LION/101_0210.jpg
http://i466.photobucket.com/albums/rr26/BLACK_LION/101_0209.jpg
http://i466.photobucket.com/albums/rr26/BLACK_LION/101_0213.jpg
wild_wild_wes
07-17-09, 01:00
^ what is the color/product used on the above rifle?
BLACK LION
07-17-09, 11:43
^ what is the color/product used on the above rifle?
Krylon camo ultra flat olive drab...believe it or not ;)
Basically, its a rattle can job.
It fills in, spreads out and dries quickly so threads and crevaces have to be masked. I use blue masking tape rather than the regular stuff.
Comes off with brake cleaner, shop towels and some elbow grease.
I either use a hanger and just walk around it or I use a cardboard box.
It can be sun dried or oven cured.
prettyreplica
07-17-09, 13:50
:)
Good!
AR Performance built 6.8mm upper MK68. A well made upper.
http://i659.photobucket.com/albums/uu319/horseplay/IMG_4892.jpg
9" DD rail, PRI folding front sight, enhanced 6.8mm bolt-AR Performance
http://i659.photobucket.com/albums/uu319/horseplay/IMG_4889.jpg
http://i659.photobucket.com/albums/uu319/horseplay/IMG_4905.jpg
M4 feed ramp
http://i659.photobucket.com/albums/uu319/horseplay/IMG_4901.jpg
http://i659.photobucket.com/albums/uu319/horseplay/IMG_4896.jpg
http://i659.photobucket.com/albums/uu319/horseplay/IMG_4898.jpg
http://i659.photobucket.com/albums/uu319/horseplay/IMG_4913.jpg
Magpul MBUS, backplate & grip
BLACK LION
07-22-09, 13:47
NICE RIG!
Is that a magpul mbuis flip up rear? How do you like it?
Magpul MBUS, sturdy, well made, easy to use, and price is cheaper then say a Troy, Troy is very good, but wanted to try a Magpul. I had a Troy before but gave it to a buddy. The Magpul sits on my Colt and new 6.8mm upper. So far so good.
BLACK LION
07-23-09, 15:03
I like the shape of the front sight...It seems to gather a ton of light around the post.
Thanks for the response
wild_wild_wes
07-25-09, 18:38
http://i659.photobucket.com/albums/uu319/horseplay/IMG_4901.jpg
Do you have a set of calipers? If so, what is the diameter of the barrel between the gas block and the flash hider?
MK 68
http://i659.photobucket.com/albums/uu319/horseplay/IMG_4930.jpg
Work in progress, awaiting for additional parts, more to follow. I do not have a caliper, but good eyes on your part, the bbl is build up by the front sight. AR Performance is here on this website perhaps he can answer better then me.
Vltor EMOD, Surefire X300, Tango Down VFG, Aimpoint M4 with Bobro mount, PRI folding front sight, PRI charging handle, Magpul grip and Magpul rear MBUS.
I took this info off of the AR performance website, hope this helps.
16" lightweight "recon" profile, DMR-combat chamber, 5R rifling, 11.25 twist, parkerized black, gas port drilled, muzzle threaded 5/8-24,
top barrel is the "XT" .700 under the guard and .600 from the gas block to muzzle.
lower barrel is the "Recon" .760 under the guard and .600 from the gas block to the muzzle.
http://i659.photobucket.com/albums/uu319/horseplay/68mmbbl.jpg
BLACK LION
07-27-09, 13:52
Nice rig... should last forever. Plus you can shoot pretty much any load from it which was the reason for the 1-11.25 twist / 5R rifling specs. Plus its chrome lined to boot .
Excellent choice.
wild_wild_wes
07-28-09, 00:15
I took this info off of the AR performance website, hope this helps.
16" lightweight "recon" profile, DMR-combat chamber, 5R rifling, 11.25 twist, parkerized black, gas port drilled, muzzle threaded 5/8-24,
top barrel is the "XT" .700 under the guard and .600 from the gas block to muzzle.
lower barrel is the "Recon" .760 under the guard and .600 from the gas block to the muzzle.
http://i659.photobucket.com/albums/uu319/horseplay/68mmbbl.jpg
Thanks! I'm getting a 6.5 Grendel that unfortunatly has the screwed-up M4 profile. I want to get that heavy front portion slimmed down; .600" it will be!
http://i659.photobucket.com/albums/uu319/horseplay/P6280044_ezr2.jpg
MK 68 bbl
wild_wild_wes
08-01-09, 15:31
(sigh) soon
6.5 Grendel DMR
http://i87.photobucket.com/albums/k132/pseudonominus/AA.jpg
http://i87.photobucket.com/albums/k132/pseudonominus/GrendelM51.jpg
http://i87.photobucket.com/albums/k132/pseudonominus/Hoplite16.jpg
Very nice, put it together yet? Are you shooting your own loads or is the 6.5 ammo
easier to get then 6.8?
wild_wild_wes
08-21-09, 01:41
Not built yet...no bolt carrier, LPK, or money.
I feel you man , no money :(
Here ya go aWESome:
http://i320.photobucket.com/albums/nn346/gunguyshots/P9210001.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P9210002.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P9210003.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P9210004.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P9210005.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P9210006.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P9210007.jpg
Heres a couple pictures of my 6.5 Grendel. This was something I tossed together mostly with extra parts I had laying around to give the 6.5mm a try.
http://i127.photobucket.com/albums/p124/happypupy/65.jpg?t=1254612172
http://i127.photobucket.com/albums/p124/happypupy/IMG_0494.jpg?t=1254612696
http://i127.photobucket.com/albums/p124/happypupy/IMG_0490.jpg?t=1254612769
buddyhoohaw
10-16-09, 19:28
Rifle length MRP in 6.8 SPC....
http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/MRP-68-1.jpg
http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/MRP-68-2.jpg
http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/MRP-68-3.jpg
Cheers
What scope is that on your LMT? US Optics? Nice.
My Noveske upper came in. Shitty camera phone pic.
http://i134.photobucket.com/albums/q111/rob_s/PIC-0068.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/NOVESKEPORT.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/NOVESKESTARBOARD.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/GB01.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/FEEDRAMPS.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/WEIGHT01.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/WEIGHT02.jpg
BOHICA 50bmg upper
alumahide 2 park finish
SWFA SS 16x
http://img689.imageshack.us/img689/9977/guns181.jpg
http://img130.imageshack.us/img130/4541/guns185.jpg
LWRC 6.8 10.5" Troy sights, Eotech and Magpul goodies
http://i449.photobucket.com/albums/qq212/KAB12869/AR017.jpg
diving dave
11-09-09, 22:28
My evil 6.8 spc...AR performance Recon upper,12 in. Daniel Defense rail, Troy BUIS,PWS FSC 30 comp, Colt lower. Topped by an ACOG TA55
http://farm3.static.flickr.com/2440/3877844793_28e371907a_b.jpg
My 6.8 SPC, 18" Cardinal Armory barrel:
http://i207.photobucket.com/albums/bb277/mdar15manager/6_8%20SPC/IMG_4622.jpg
Taking her to class:
http://i207.photobucket.com/albums/bb277/mdar15manager/Misc/Precision%20Rifle%202/IMG_4963.jpg
Here's the updated Grendel with Leupold Rifleman 4-12x40. A Larue SPR mount will be on this rifle sometime following Christmas :)
http://i320.photobucket.com/albums/nn346/gunguyshots/PA240001-1.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/PA240002.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/Leupold12xmodified.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/Leupold4xmodified.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/PC080001.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/PC080003.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/PC080006.jpg
mattpittinger
11-16-09, 23:55
Spikes lower
Bushmaster upper
BCM M-16 BCG
ACS
7.62x39 bolt
C-products Mags
MI extended rail
TLR-3
Leupold VX-3 1.5X5
http://i658.photobucket.com/albums/uu307/mattpittinger/utf-8BSU1HMDAxMTQtMjAwOTExMTYtMTAxM.jpg
http://i658.photobucket.com/albums/uu307/mattpittinger/utf-8BSU1HMDAxMTktMjAwOTExMTYtMTAxM.jpg
http://i658.photobucket.com/albums/uu307/mattpittinger/utf-8BSU1HMDAxMTctMjAwOTExMTYtMTAxM.jpg
http://i658.photobucket.com/albums/uu307/mattpittinger/utf-8BSU1HMDAxMTYtMjAwOTExMTYtMTAxM.jpg
http://i658.photobucket.com/albums/uu307/mattpittinger/utf-8BSU1HMDAxMTUtMjAwOTExMTYtMTAxM.jpg
rob_s, details please. I'm intruiged.
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/NOVESKEPORT.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/NOVESKESTARBOARD.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/GB01.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/FEEDRAMPS.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/WEIGHT01.jpg
http://i134.photobucket.com/albums/q111/rob_s/website/NOVESKE%2068/WEIGHT02.jpg
6.5 Grendel
Alexancer Arms lower with standard DPMS internals, LaRue receiver extension, HSS buffer, HD recoil spring. Troy sling mount
Magpul ACS stock, 0.55 butt pad
Magpul MIAD grip with integral trigger guard, AA battery compartment
Sabre Defense M5 flattop, 16 inch chrome bore, A2 flash hider, standard hand guards, mid-length gas port
YHM back up iron sights
Eotech XPS3-0 holographic sight
Not pictured, LaRue padded Tactical sling set up as single point
http://images52.fotki.com/v304/photos/5/41655/8123914/AR_6_5_Grendel_Carbine_01-vi.jpg
http://images51.fotki.com/v423/photos/5/41655/8123914/AR_6_5_Grendel_Carbine_04-vi.jpg
http://images52.fotki.com/v733/photos/5/41655/8123914/AR_6_5_Grendel_Carbine_10-vi.jpg
Happy New Year, Everyone!
VooDoo6Actual
01-05-10, 12:42
Top pic
Noveske 6.8 SPCII Infidel (13.7") w/ NF 1X4X24
http://i40.photobucket.com/albums/e225/teehee321/Nice5.jpg
http://i40.photobucket.com/albums/e225/teehee321/Nice2.jpg
elkknuckle
01-19-10, 19:59
My plain-jane Alexander Arms .50 Beowulf Entry with ACE ARFX stock
Spike's ST-22 Upper on a DPMS Lower w/ IOR Valdada RDS Red Dot
http://i285.photobucket.com/albums/ll42/ekbergie/AR15/Hunting002-1.jpg
Tactical Solutions AR-22 M4 upper on a CMMG lower w/ Millett DMS-1
http://i285.photobucket.com/albums/ll42/ekbergie/AR15/Hunting001.jpg
Wayneard3413
02-15-10, 19:15
http://i156.photobucket.com/albums/t37/wayneard3413/DSCF2214.jpg
Here's my 6.8mm SBR I put together last winter. I have fired about 2200 rounds since I built it without one malfunction (all handloads using 115 FMJ's/H322/2300fps).
Colt upper receiver with Noveske Crusader 12.5" S/S barrel and 9" LaRue forend, LMT front & rear sights. Colt M16 carrier w/ Noveske bolt. Sun Devil billet lower.
Old school Viet Nam era teardrop. Colt 9mm SMG trigger/hammer pins (cause that's what I had) PRI mag's (20 rounders, 25's are too long). LMT SOPMOD buttstock. Oh, I went with an Armalite flash hider as I feel the others are too much.
It's the rifle I would grab first if there were things that needed to be shot.
http://img.photobucket.com/albums/v628/openbolt/SUC55396.jpg
Here's the ejection marks...
http://img.photobucket.com/albums/v628/openbolt/SUC55388.jpg
Bowhunter2001
03-14-10, 21:44
Here is my new Les Baer .264/6.5 in last Friday. I am waiting for the factory .264 Hornady/black hills factory ammo to come in. LB says April. They fire two five shot groups with this new ammo. 5 shots in that picture. This gun looks promising!
http://i187.photobucket.com/albums/x265/Bowhunter2001/a002.jpg
http://i187.photobucket.com/albums/x265/Bowhunter2001/a012.jpg
Here is my 6.8.
http://i975.photobucket.com/albums/ae232/t_ridl/TJ%20pics/IMG_0226.jpg
http://i975.photobucket.com/albums/ae232/t_ridl/TJ%20pics/AR-15681.jpg
Magpul UBR
Magpul Miad
Aimpoint M4 with 3x Mag on LaRue Mounts
Surefire M900A with LaRue Mount
Surefire Muzzle Brake
LMT in 7.62x39
Upper half:
Cerakoted LMT Upper Half
ER Shaw 16" carbine barrel---FSB cut down to be lo-profile gas block
Streamlight TLR-1
Smith Vortex 9mm flash hider
LMT Bolt Carrier, Model 1 sales bolt and enhanced firing pin
Vortex Strikefire 4moa
Badger Ord Tac Latch
ebay special grip-pod for pressure pad
Troy MRF-R floating rail
Lower:
Cerakoted LMT Lower
SOPMOD Stock
6position milspec tube
YHM Oversize takedown pins
Ambi Sling plate
Ambi Safety
Ergo pistol grip
Wolff extra power hammer spring
KNS Gen2 Mod1 anti-rotation pins
CProd 30rd (25rd loaded) 762x39 mag
Magpul ranger plate
http://i320.photobucket.com/albums/nn346/gunguyshots/m4ramps.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P3270026.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P3270028noserial.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P3280031.jpg
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000759.jpg
Smith & Wesson M&P-15 22 with flash hider.
I added some Magpul goodies that I had lying around and a Sight Mark sight. I am going fab something up at the rear of the receiver to mimic an ASAP plate. Great low budget shooter.
My 6.8 build:
Mega MTS-300 mono upper
Mega forged lower
Bison 18" BB middy SPR
Vltor lo-pro GB
Magpul ACS w/ASAP
Phantom 5c2 FH
DMS-1/LT104
http://i497.photobucket.com/albums/rr335/redyak3/First%20BR%20Build/black%20rifle2/006-3.jpg
http://i497.photobucket.com/albums/rr335/redyak3/First%20BR%20Build/black%20rifle2/005-1.jpg
My 6.8 build:
Mega MTS-300 mono upper
Mega forged lower
Bison 18" BB middy SPR
Vltor lo-pro GB
Magpul ACS w/ASAP
Phantom 5c2 FH
DMS-1/LT104
Tell us what you think about that Mega Upper......
Tell us what you think about that Mega Upper......
I love it!!!
Profile is real close to my DDM49.0. Very well fabricated from 1 piece of 7075 billet. Barrel install was a breeze. I don't know the exact weight, but it certainly isn't heavy. Don't think I'll build with anything else.
My 6.8SPC hunting build
Stag 5H upper with railed gas block
Magpul OEM handguards (foliage green)
Simmons 2.5-10x40 scope on Burris PEPR mount, no BUIS
Daniels Defense lower
G&R LPK
Magpul MOE triggerguard
Ergo handgrip
Magpul ACS
http://home.comcast.net/~mfrey2/pwpimages/68%20Stag%20DD.JPG
glock10mmman
04-26-10, 20:19
Here is hog/zombie killer
WOA 16" middy 6.8 spec II 1-11" twist barrel
Stag marked 6.8 lower
Magpul CTR
Magpul MIAD
DPMS LPK with Bill Springfield #3 trigger
RRA 6.8 marked upper
FA BCG from Stag
ARMS SIR rifle length rail system
ACOG 3.5
I am developing a load with 110 grain V-max over H335. I have a few other projects going on 6.5, 6x45 etc that are more important so the 6.8 loading is on the back burner for now.
http://www.ar15armory.com/forums/uploads/1269906683/med_gallery_256_99_56162.jpg
http://www.ar15armory.com/forums/uploads/1269906683/med_gallery_256_99_85183.jpg
http://www.ar15armory.com/forums/uploads/1269906683/med_gallery_256_99_91058.jpg
Just finished building this tonight! This was supposed to be a "left over parts" gun but i think I went a bit wild with it. I think I want a Foliage Green ACS Stock BUT the standard M-4 stock is very quick to the shoulder. Maybe a FG CTR. I can't find FG MBUS sights ANYWHERE! This gun is surprisingly light (or balanced). I think it has to do with the scope. It is a bit heavy and puts a little more weight in the middle of the rifle.
RRA lower with RRA LPK.
White Oak Armament 6.8SPC Spec II 1/11 twist 16in middy match barrel with matched bolt.
Spike's Tactical upper and bolt carrier.
Burris AR-332 fixed 3X scope (surprisingly clear for a $325.00 scope).
PWS FC30 comp/fh
Troy TRX 13in standard battle rail (heavy but thin).
BCM Gunfighter Mod 3.
Ambi Safety.
Barrett true 30 round 6.8 magazines.
Magpul Kool Aid in Foliage green including AFG, ASAP and BAD lever.
ANY TIPS OR ADVICE ON A STOCK WOULD BE GREAT!
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000772.jpg
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000770.jpg
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000773.jpg
5.45
http://i871.photobucket.com/albums/ab275/josephbutler1/DSCI0220.jpg
http://i871.photobucket.com/albums/ab275/josephbutler1/DSCI0235.jpg
http://i38.photobucket.com/albums/e150/svtvenom98/Iron%20Ridge%20Arms%20IRA-10D/DSC_1003.jpg
http://i38.photobucket.com/albums/e150/svtvenom98/Iron%20Ridge%20Arms%20IRA-10D/DSC_1007.jpg
http://i38.photobucket.com/albums/e150/svtvenom98/Iron%20Ridge%20Arms%20IRA-10D/DSC_1008.jpg
wild_wild_wes
05-01-10, 21:22
^ what is the gas block?
^ what is the gas block?
It's a JP Enterprises adjustable unit.
Powder Burns
05-02-10, 15:55
http://i661.photobucket.com/albums/uu340/Powder_Burns/SDC10137.jpg
http://i661.photobucket.com/albums/uu340/Powder_Burns/SDC10135.jpg
6.8x43 and .458 Socom
dd lite rails, sei vortex flash hiders, vltor e-mods, tango down battlegrips, mega receivers. .458 is a RRA upper with arms rear and MI flip-up front. 6.8 is built on Mega billet with an ARP 6.8x43 recon barrel, JP adj. gas block, Diamondhead irons front and rear. .458 is wearing a Mk4 2.5-8x36 in a LaRue SPR mount, 6.8 has an Aimpoint CompM4S in a LaRue 659-NV mount. Vtac slings, qd swivel mounts are made by Daniel Defense.
LWRCI M6A3 in 6.8 SPC. Unmodified as yet. Ammunition and magazines are in. If it stops raining we're going to zero the irons. EOTech EXPS3-0 and 3X Magnifier on order.
http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/LWRCI%2068-SPC/IMG_1169300DPISize1024.jpg
http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/LWRCI%2068-SPC/IMG_1156300DPISize1024.jpg
Shot of the piston system with the top rail removed:
http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/LWRCI%2068-SPC/IMG_1168300DPISize1024.jpg
wild_wild_wes
05-08-10, 21:44
Here are two 6.5 Grendel retro builds I'm doing; 24" Sniper and 16" Designated Marksman:
http://i264.photobucket.com/albums/ii173/USPx4/gren24kit.jpg
http://i264.photobucket.com/albums/ii173/USPx4/gren16kit.jpg
I just had the Rock River handguards Cerakoted by Gulf Coast Shooting; they turned out great! Just a few parts to get still.
I will try the 24" on my club's Long Range Tactical match (200-1,000 yards); the 16" will be for metallic silhoutte shooting.
wild_wild_wes
05-08-10, 21:49
It's a JP Enterprises adjustable unit.
Thanks! Does that require a special gas tube?
Thanks! Does that require a special gas tube?
Sorry for the late reply, I just saw this. No, it uses a standard gas tube but it has a small set screw w/ allen head to close/open the gas port. You can fine tune the gas sytem in this manner. It works pretty well!
UsnRoberts
05-27-10, 00:48
Anyone know whats up with photobucket recently?
May I ask if USNRoberts is banned as it says below his handle, or is that a joke?
OK, I'll play. Here's the baby of my 6.8 SPC's. 7.5" Noveske barrel.
http://img99.imageshack.us/img99/3540/babysbr.jpg
GUNFIGHTER
06-19-10, 16:46
Here is some of our newest builds..
11" 6.8 SPC w/Adams Arms piston system.
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS020.jpg
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS025.jpg
GUNFIGHTER
06-19-10, 16:52
6.8 SPC 7.5" w/ Adams Arms Piston system
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS062.jpg
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS058.jpg
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS064.jpg
GUNFIGHTER
06-19-10, 16:53
View of new laser engraved uppers for .458 SOCOM
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/105.jpg
7.62x39 AR Pistol---10.5" Wilson Arms barrel---YHM Specter LW w/handguard cap---Brownells 9mm flash hider
TLR-1 w/pressure pad
Tango Down Scar panel w/pocket for pressure switch
Magpul XTMs, MOE triggerguard
Aimpoint Comp M2
http://i320.photobucket.com/albums/nn346/gunguyshots/P8030006.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P8030007.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P8030008.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/target.jpg
Here is some of our newest builds..
11" 6.8 SPC w/Adams Arms piston system.
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS020.jpg
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS025.jpg
One of the sickest SBR's i've seen...:alcoholic:
6.8 SPC 7.5" w/ Adams Arms Piston system
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS062.jpg
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS058.jpg
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/CUSTOMPICS064.jpg
I REALLY like the look of that with the C-More sight on it. Very sharp!!
Dtech 243WSSM 24" shilen
6x20x44 Vortex Viper
http://a.imageshack.us/img832/3421/guns253large.jpg
http://a.imageshack.us/img818/916/guns249large.jpg
http://a.imageshack.us/img818/916/guns249large.jpg
recon562001
09-07-10, 17:31
http://www.m4carbine.net/picture.php?albumid=285&pictureid=1350
http://www.m4carbine.net/picture.php?albumid=285&pictureid=1350
Not working for me
VooDoo6Actual
09-14-10, 09:38
http://i40.photobucket.com/albums/e225/teehee321/Noveske68DEA.jpg
http://i40.photobucket.com/albums/e225/teehee321/IMG_1631Large.jpg
http://i40.photobucket.com/albums/e225/teehee321/NoveskeDiplomat681.jpg
http://i40.photobucket.com/albums/e225/teehee321/NoveskeDiplomat682.jpg
http://i40.photobucket.com/albums/e225/teehee321/Noveske68Pistol006Large.jpg
6.8
http://i627.photobucket.com/albums/tt358/kdcgrohl/firearms/IMG_20100924_180703.jpg
My newest toys
http://home.comcast.net/~mfrey2/pwpimages/AR%202%2000.JPG
They are both built on DD lowers from Grant at G & R. The one on the bottom is a 5.56 upper from BCM with DD rails, a CTR stock and an EOtech XPS.
This one is my 6.8SPC hunting rifle.
http://home.comcast.net/~mfrey2/pwpimages/AR%202%2001.jpg
It has an AR Performance 18" Stainless upper, an ACS stock, and at least for now, a Simmons 2.8-10x44 scope in a Burris mount. Whenever Magpul finally brings out their mid-length MOE handguards, it will get a set.
http://home.comcast.net/~mfrey2/pwpimages/AR%202%2002.jpg
http://usera.ImageCave.com/seafbyrd/customsharp900x600.jpgOK, so I have figured out how to get images up on the site, we will see next time, anyway, the top is my 6.5 Grendel Adams Arms piston 18", the bottom rifle is my 6.8 Noveske with 14.5 Noveske Afghan (sp?) barrel. Really enjoyed building these and painting and all that constructive stuff. Oh and the Commander in the middle is my second Commander build, Ion Bond I did not do. I also did my photography, I am a photographer.
freefalle7
10-24-10, 00:39
http://pic80.picturetrail.com/VOL965/4056977/23525913/392809990.jpg
http://pic80.picturetrail.com/VOL965/4056977/23525913/392857287.jpg
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000835.jpg
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000833.jpg
mega 762
.
http://i197.photobucket.com/albums/aa166/redtazdog/Mega308done29w.jpg
http://i197.photobucket.com/albums/aa166/redtazdog/Mega308done21w.jpg
http://i197.photobucket.com/albums/aa166/redtazdog/Mega308done30w.jpg
http://i197.photobucket.com/albums/aa166/redtazdog/Mega308done25w.jpg
AR Performance 7.62x39:
http://i150.photobucket.com/albums/s95/MMcfpd/ARP_762x39.jpg
Th3Revreant
12-04-10, 14:29
mega 762
.
http://i197.photobucket.com/albums/aa166/redtazdog/Mega308done29w.jpg
http://i197.photobucket.com/albums/aa166/redtazdog/Mega308done21w.jpg
http://i197.photobucket.com/albums/aa166/redtazdog/Mega308done30w.jpg
http://i197.photobucket.com/albums/aa166/redtazdog/Mega308done25w.jpg
That rifle is Gizztasticlyamazing (yes, its a real word). Nice setup.
http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/photo-13.jpg
Th3Revreant
12-05-10, 01:08
http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/photo-13.jpg
So where would one interested party, such as a black rifle obsessed individual like me, obtain and purchase a .300BLK upper reciever? Any help would be mucho apperciatio.
So where would one interested party, such as a black rifle obsessed individual like me, obtain and purchase a .300BLK upper reciever? Any help would be mucho apperciatio.
You may obtain one from AAC and their vendors.....
Noveske:
http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=10-300&cat=173&page=1&search=&since=&status=
Bullseye Indoor Range are making some:
http://www.silencertalk.com/forum/viewtopic.php?f=128&t=63082
KAC (DUH)
http://www.silencertalk.com/forum/viewtopic.php?f=128&t=63325
Part No. 101716
Allen Arms also... may be out of stock by now though:
http://www.silencertalk.com/forum/viewtopic.php?f=128&t=62937
That should get you started.
Mega MA-Ten in .308
http://farm6.static.flickr.com/5247/5266732512_b0ba5daec7_b.jpg
My 14 Y/O son shot this 4x4 whitetail buck this deer season with my 6.5 Grendel build:
http://i88.photobucket.com/albums/k185/jimkurtsey/Rourke2010buck2.jpg
http://i88.photobucket.com/albums/k185/jimkurtsey/Rourke2010buck.jpg
Rifle specs:
AA Entry Upper
Tactical Innovations Billet Lower
Timney trigger
RRA internals
Magpul furniture
freefalle7
01-12-11, 19:06
Well in my further quest to build a SR-25/LMT MWS Rifle here is the completed work
http://pic80.picturetrail.com/VOL965/4056977/23525913/394566104.jpg
http://pic80.picturetrail.com/VOL965/4056977/23525913/394563570.jpg
http://pic80.picturetrail.com/VOL965/4056977/23525913/394563579.jpg
http://pic80.picturetrail.com/VOL965/4056977/23525913/394563601.jpg
http://pic80.picturetrail.com/VOL965/4056977/23525913/394563606.jpg
VooDoo6Actual
01-13-11, 11:39
nice thunderstick
Devildog0311
01-19-11, 18:48
My .458 Socom
http://i27.photobucket.com/albums/c191/loborojo338/Football139.jpg
Is that a .458 upper on a .223 lower?
Devildog0311
01-19-11, 18:51
http://i661.photobucket.com/albums/uu340/Powder_Burns/SDC10137.jpg
http://i661.photobucket.com/albums/uu340/Powder_Burns/SDC10135.jpg
6.8x43 and .458 Socom
dd lite rails, sei vortex flash hiders, vltor e-mods, tango down battlegrips, mega receivers. .458 is a RRA upper with arms rear and MI flip-up front. 6.8 is built on Mega billet with an ARP 6.8x43 recon barrel, JP adj. gas block, Diamondhead irons front and rear. .458 is wearing a Mk4 2.5-8x36 in a LaRue SPR mount, 6.8 has an Aimpoint CompM4S in a LaRue 659-NV mount. Vtac slings, qd swivel mounts are made by Daniel Defense.
Im looking at purchasing a .458 socom, can u mount the same rail systems on these that you do with a .223?
Devildog0311
01-19-11, 18:53
View of new laser engraved uppers for .458 SOCOM
http://i250.photobucket.com/albums/gg244/GUNFIGHTER08/105.jpg
Where do you get your .458 ammunition?
turan tactical
01-21-11, 08:33
Two Safir Arms shotguns chambered in .410 ga
http://i530.photobucket.com/albums/dd350/turan-tactical/DSC05849.jpg
6.8SPC
http://i627.photobucket.com/albums/tt358/kdcgrohl/firearms/IMG_20110115_132927.jpg
6.8SPCVery nice, how is it equipped?
Very nice, how is it equipped?
Build thread. (http://m4carbine.net/showthread.php?t=63360)
VooDoo6Actual
01-26-11, 13:44
I'm curious kdcgrohl,
How much weight NET did you save by dimpling the barrel ?
TIA
I'm curious kdcgrohl,
How much weight NET did you save by dimpling the barrel ?
TIA
The quoted weight of the barrel ALONE from WOA was 2lb1oz.
The weight after Marvin did his work, INCLUDING a Vltor gas block with set screws & taper pin, Vltor VIS barrel nut and GunKote is 1lb13.9oz
I don't know the weight on the barrel nut, gas block etc. individually.
VooDoo6Actual
01-26-11, 16:47
check.
thanks
Fulton Armory Titan UPR
http://scottdillon.net/fultontitan/content/bin/images/large/_4686812785.jpg
Gunn-Fighter
02-04-11, 14:02
http://i29.photobucket.com/albums/c275/lucksthename/DSCN1212.jpg
http://i29.photobucket.com/albums/c275/lucksthename/DSCN0867.jpg
I just got it together, going to shoot it for the first time this weekend. Trijicon has never made lowers, that was a special run done for us by Mega. Other than the logo, its a standard Gator lower.
Pic thread:
http://i15.photobucket.com/albums/a386/RatFink1961/Guns/IMG_1766.jpg
ok. that is awesome.
Old rifle (one year old) new glass. The GG&G QD mount I got was way too low. The PEPR mount was super heavy so I put on the old standard Burris mounts for now. Burris XTR 14 on my 6.8 SPC with WOA match barrel with matching bolt.
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000907.jpg
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000906.jpg
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000902.jpg
6.5 Grendel
This pic was taken on my first trip out after adding some burlap like material. The burlap is held in place with Larue rail clips. It works good but any time it gets in the way I cut it off so there's not much left on the rifle now. I built the rifle from various parts most of which should be obvious. I'm pleased with the rifle thus far.
Mega MA-Ten in .308
http://farm6.static.flickr.com/5017/5471035567_0a2f77f781_b.jpg
Wilson Combat 12" 6.8
LAR Upper-Infidel port cover
Troy TRX VTAC 11"
YHM 5/8-24 762 QD
Aimpoint Comp M2, Larue LT-129
http://i320.photobucket.com/albums/nn346/gunguyshots/P2270003-1.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P2160003.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P2160002.jpg
It's 10.5" 7.62x39 sibling
http://i320.photobucket.com/albums/nn346/gunguyshots/105and12.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P2090004.jpg
Just got done putting the upper together on my first 6.5mm Grendel build. ... let the fun begin.
I got a POF Gen III lower for my Grendel build, just waiting on a lower parts kit...
http://img146.imageshack.us/img146/1717/img0138v.jpg (http://img146.imageshack.us/i/img0138v.jpg/)
http://img156.imageshack.us/img156/5320/img0136gj.jpg (http://img156.imageshack.us/i/img0136gj.jpg/)
http://img683.imageshack.us/img683/8674/img0134ri.jpg (http://img683.imageshack.us/i/img0134ri.jpg/)
Little 5.56 sister with big 6.5mm sister..
http://img810.imageshack.us/img810/2452/img0158py.jpg (http://img810.imageshack.us/i/img0158py.jpg/)
http://img98.imageshack.us/img98/2226/img0143er.jpg (http://img98.imageshack.us/i/img0143er.jpg/)
6.8
http://i449.photobucket.com/albums/qq212/KAB12869/NightForceand68005.jpg
http://i449.photobucket.com/albums/qq212/KAB12869/NightForceand68001.jpg
http://i449.photobucket.com/albums/qq212/KAB12869/NightForceand68007.jpg
Fried Chicken Blowout
04-01-11, 22:04
6.5 Grendel - My first build from scratch. See my post about it here...
http://m4carbine.net/showthread.php?t=77989
http://gallery.me.com/jason_alicia/100485/DSCN6336/web.jpg?ver=13017009650001
http://gallery.me.com/jason_alicia/100485/DSCN6343/web.jpg?ver=13017009790001
http://gallery.me.com/jason_alicia/100485/DSCN6352/web.jpg?ver=13017009970001
http://gallery.me.com/jason_alicia/100485/DSCN6349/web.jpg?ver=13017009930001
http://www.winslowmemorial.com/images/P1010272_WEB.jpg
Noveske 300 BLK 10" Barrel
All the standard MK12 MOD0 upper parts minus the OPS hardware & PRI front sight base
TBAC 30P-1 Sound Suppressor
Tango Down ACB-4 Bipod
LMT Enhanced BCG & PRI M84 Charging Handle
LMT SOPMOD Stock & Buffer Tube
H2 Buffer
Leupold Mark 4 3.5-10x40mm LR/T M3 Front Focal TMR Reticle with Tenebraex ARD
http://www.winslowmemorial.com/images/P1010260_w.jpg
Alternate Optic Configuration: Trijicon Tri-Power TX30 with Tenebraex ARD
http://www.winslowmemorial.com/images/P1010271_WEB.jpg
6.8's
16" Apex/BHW in camo
18" Mega Mono/Bison
http://i497.photobucket.com/albums/rr335/redyak3/DSCN0385.jpg
going hunting...
http://i497.photobucket.com/albums/rr335/redyak3/DSCN0388.jpg
VooDoo6Actual
04-07-11, 10:47
there are some very nice builds in here gents.
offroader1006
04-08-11, 16:51
she's not as fancy as some, but she shoots great and never had a hiccup.*
Stag 5H 6.8
When i first got it. Cheap NCstar optic. Now doing duty on my 10/22. Only lasted about 3 magazines before it started losing zero.
http://oldsouthoffroad.com/stag/SANY1797weba.jpg
http://oldsouthoffroad.com/stag/DSCF0007800x600.jpg
http://oldsouthoffroad.com/stag/DSCF0011800x600.jpg
http://oldsouthoffroad.com/stag/DSCF0033800x600.jpg
Put on a Burris combo.
http://oldsouthoffroad.com/stag/SANY1928800x600.jpg
http://oldsouthoffroad.com/stag/SANY1937800x600.jpg
http://oldsouthoffroad.com/stag/SANY2218web.jpg
I bought it for hunting pigs, and i i spent all of $12 on camo paint, and 15 minutes in the yard applying it. :D
http://oldsouthoffroad.com/stag/IMG_0783web.jpg
http://oldsouthoffroad.com/stag/IMG_0954mod2%20copy.jpg
*when i first received it it would not chamber consistently. Stag sent me a box, i sent it in, and i got it back with a new upper and barrel. Since then it has been G2G.
Reg'd LMT SBR lower:
10.5" x39
http://i320.photobucket.com/albums/nn346/gunguyshots/P4250004.jpg
12" 6.8
http://i320.photobucket.com/albums/nn346/gunguyshots/P4030003-1.jpg
Soon my 16" Grendel barrel will be here:
http://i320.photobucket.com/albums/nn346/gunguyshots/P4280003.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P4280005.jpg
HERE:
http://i320.photobucket.com/albums/nn346/gunguyshots/16inchSSGrendel.jpg
freefalle7
05-04-11, 18:07
http://pic80.picturetrail.com/VOL965/4056977/23525913/396577872.jpg
http://i994.photobucket.com/albums/af70/thebelly925/IMAG0200.jpg
AR Performance upper. Spike's Lower. Not really a 'frankengun' per say, but it works pretty well.
http://i994.photobucket.com/albums/af70/thebelly925/IMAG0202.jpg
3-shot 100 yd group using an inexpensive 1-4x24. Harrison's upper is phenomenal!!
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1000961.jpg
Here's pics of my last 2 6.8 SPC builds.
http://img.photobucket.com/albums/v85/Buckmaster/68%20Hunter%20Build/68HuntingRifle019-1.jpg
http://img.photobucket.com/albums/v85/Buckmaster/POF%2068/68SPCPOF.jpg
Redid the forearms on my 10.5 and Grendel. Sold the 6.8 when someone offered me $100 more than I had in it---good enough deal for me.
Troy VTAC 9 on the 10.5" and VTAC 11 on the Grendel:
http://i320.photobucket.com/albums/nn346/gunguyshots/P6160004.jpg
parted out my 6.8 dmr setup and ended up assembling this 6.8 based on a blackwater lower.
http://img32.imageshack.us/img32/9978/blkhwkop.jpg
http://i836.photobucket.com/albums/zz285/k_wilkin/DSC_1264.jpg
Specs:
BCM upper
BCM Mod4 charging handle
Noveske Afghan 6.8 SPC II 1:12 polygonal
Vortex FH
Centurion Arms C4 rail 12" with Magpul XTMs
Colt carrier
LWRC Advanced Combat Bolt
KAC Micros (front and 300m rear)
SureFire M300A in Gear Sector mount with SR07 switch
Spike's lower with CMT/Stag LPK
Magpul BAD, Enhanced Trigger Guard, MIAD with CR123 grip core
Geissele SSA-E
LMT receiver extension and castle nut
Noveske QD end plate
VLTOR IMOD
EOTech EXPS 2-0
Aimpoint 3x in LaRue LT649 mount
http://i752.photobucket.com/albums/xx166/jasonusvi/New65-1.jpg
Not installed next to 12.5" 6.8
http://i752.photobucket.com/albums/xx166/jasonusvi/New6568.jpg
Eagle Arms Preban lower gunkoted grey
Phase5 lever
BAD ambi selector
Noveske QD endplate
SSA Trigger
Aimpoint CompM4 in Larue mount
Vltor imod stock
18" 6.5PCC BHW barrel 1x8 3R poly with Noveske switchblock converted for use in LMT MRP by DBMG w/ AAC 51T hider
12.5" 6.8 LMT barrel with AAC 51T brake
high plain drifter
09-18-11, 20:37
bison state armory 6.8 SPC upper on a BCM lower.
http://i1080.photobucket.com/albums/j325/hiplaindrift/IMG_1916.jpg
http://i1080.photobucket.com/albums/j325/hiplaindrift/IMG_1914.jpg
Wilson 6.8 SPC 16" Recon barrel, DD 12.0 lite rail, MEGA lower, Geissele DMR, Trijicon TR24G, AAC SPR-M4 6.8
http://i1180.photobucket.com/albums/x407/GuiltyDaze/Mega-Wilson-16-Inch-68SPC-12-Inch-Daniel-Defense-Lite-SPRM4.jpg
6.5 Grendel SPR with 18.25" barrel, cut down from Alexander Arms 20" barrel. Surefire FA68AR suppressor, Nightforce 3.5-15x50 F1 mildot scope.
2510fps MV shooting Hornady 123gr Amax factory ammo. Zero shift with the can mounted is half a mil straight down.
http://personal.visualitymedia.com/personal/ar15/65sprsfcan_1000.jpg
Beautiful rifle sir, how far have you taken it out to?
http://i627.photobucket.com/albums/tt358/kdcgrohl/firearms/2011-10-17_17-12-02_288.jpg
^ DO WANT. 12.5"?? ADCO Dimples?
^ DO WANT. 12.5"?? ADCO Dimples?
12. Marvin dimples.
ICANHITHIMMAN
10-18-11, 20:20
http://i752.photobucket.com/albums/xx166/jasonusvi/New65-1.jpg
Not installed next to 12.5" 6.8
http://i752.photobucket.com/albums/xx166/jasonusvi/New6568.jpg
Eagle Arms Preban lower gunkoted grey
Phase5 lever
BAD ambi selector
Noveske QD endplate
SSA Trigger
Aimpoint CompM4 in Larue mount
Vltor imod stock
18" 6.5PCC BHW barrel 1x8 3R poly with Noveske switchblock converted for use in LMT MRP by DBMG w/ AAC 51T hider
12.5" 6.8 LMT barrel with AAC 51T brake
Finaly a Pic of a CQB MRP and an 18" barrel you should go post this in the MRP pic thread
http://i320.photobucket.com/albums/nn346/gunguyshots/Upper%20Builds/PA210004-1.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/Upper%20Builds/PA210003.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/Upper%20Builds/capture.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/Upper%20Builds/PA210013.jpg
6.5 Grendel 16" midlength
SS Bead blasted barrel
Colt chrome carrier F/A
Troy VTAC 11
RVG
YHM 762 QD 9/16-24
Vltor Modstock, milspec
Ergo
Burris PEPR QD
Leupold Rifleman 4-12x40 my lady bought me
Just needs a 15oz Titanium silencer to complete it...
Finished my 6.8 project with a little help from a friend ( thanks Al.)
http://i706.photobucket.com/albums/ww66/freelancekilla/IMG_00781.jpg
http://i706.photobucket.com/albums/ww66/freelancekilla/IMG_00791.jpg
SI Defense Billet Upper(FailZero)/Lower(Sand)
FailZero 6.8 Bolt/BCG
Ergo grip (DE)
Spikes Enhanced LPK (FailZero trigger/hammer/disconnector)
KNS Gen2 (DE)
Magpul ASAP
Magpul ACS
Magpul B.A.D
BAD Selector
Troy 13" TRX Extreme Battlerails (DE)
Troy BUIS Rear (Di-Optic) (DE)
Troy BUIS Front (HK Style) (DE)
Troy Ambi Mag release
Prince 50 BB
BattleComp BABC
Super crappy indoor pic of my SBR'd XCR with the 10.5" 6.8 conversion kit installed (have the same configs in 5.56 and 7.62x39). Still need to get an Aimpoint micro to throw on there instead of the ACOG. Also waiting on my rail covers and the new FAST stock that RobArms just released.
http://i4.photobucket.com/albums/y143/AEnemaBay/XCR/IMG_4564Large.jpg
freefalle7
11-12-11, 06:20
http://pic80.picturetrail.com/VOL965/4056977/23525913/399462330.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/PA300001-1.jpg
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1010228.jpg
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/P1010229.jpg
More 6.8 love.
http://img.tapatalk.com/6c42f24c-9f87-595e.jpg
--thanks Boomer!
Brandon
Sent from my iPhone using Tapatalk.
Raptor1990
02-24-12, 11:55
The Beowulf
11295
11296
Some pictures of my 18" 6.8SPC
BM lower/Larue upper,WOA 18" 1/11 twist,DD14" light rail,Geissele DMR trigger,Magpul UBR.
http://i33.tinypic.com/15pj3f8.jpg
http://i35.tinypic.com/2449q9e.jpg
http://i38.tinypic.com/wjj90o.jpg
http://i34.tinypic.com/14x169t.jpg
http://i33.tinypic.com/145pbs.jpg
http://i33.tinypic.com/xfahc9.jpg
Another of my variants:
16" Titan Armory(ARPreformance supplied barrel) in 6.8x43mm sporting a PRI rifle length forend.
http://i38.tinypic.com/1443392.png
http://i34.tinypic.com/kehs11.png
http://i33.tinypic.com/289is2c.png
http://i38.tinypic.com/zydr0z.png
This is my hunting rig.
Super lightweight & awsome shooting! :D
Wormydog1724
02-27-12, 18:16
Bison Armory 16" Recon 6.8 SPC
http://i416.photobucket.com/albums/pp247/wormydog1724/c5e1ab7c.jpg
Success
http://i416.photobucket.com/albums/pp247/wormydog1724/Coyote%20Hunting/569bc51c.jpg
Z71Silverado09
03-06-12, 07:25
nice, i need one....
The Beowulf
11295
11296
Very nice looking setup.
However...
I would think that an optic with an extremely short eye relief like an ACOG would be a less than ideal choice for a hard recoiling caliber like the Beowulf.
:confused:
freefalle7
03-30-12, 12:37
Well its here and it looks great!!! thanks Kevin, Casey and Troy for getting me this fine rifle.
Added new stock,grip and offset sights
http://pic80.picturetrail.com/VOL965/4056977/23984833/401907881.jpg
http://pic80.picturetrail.com/VOL965/4056977/23984833/401862807.jpg
http://pic80.picturetrail.com/VOL965/4056977/23984833/401862810.jpg
My son loved the box BTWhttp://www.ar15.com/images/smilies/icon_smile_big.gif
http://pic80.picturetrail.com/VOL965/4056977/23984833/401862811.jpg
TangoSauce
05-07-12, 23:48
18'' 6.8 ARP LaRue build by WW Guns. SWFA SS 1-6X shipping in a few months...
http://i1117.photobucket.com/albums/k596/TangoSauce/IMG00666-20120507-1751.jpg
http://i1117.photobucket.com/albums/k596/TangoSauce/IMG00568-20120323-1654.jpg
let the girls out this weekend.
5.56 stag/6.8 stag w/ troy 10" free float
S&W mp22
S&W shield 9mm
WNY_Whitetailer
06-03-12, 10:27
6.8
Spikes lower with Spikes Enhanced LPK
ARP upper with 16" fluted barrel and Skip Flute Rail
Bushnell Elite 3200 3-10x40 scope with Burris QR P.E.P.R. mount
Magpul STR Stock
Badger Ordinance Tactical Latch
http://i258.photobucket.com/albums/hh246/mfennroberts/arp68-1-1.jpg
http://i258.photobucket.com/albums/hh246/mfennroberts/ARP68-2.jpg
http://i258.photobucket.com/albums/hh246/mfennroberts/arp68-1-1.jpg
looooove the spiral flute...
http://img.photobucket.com/albums/v292/TexAg05/IMAG0986.jpg
http://img.photobucket.com/albums/v292/TexAg05/IMAG0988.jpg
Aero Precision lower w/ Stag Arms LPK, Rainier Arms complete upper chambered in 6.8 SPC, 18" mid-length. This rifle is complete pending a Leupold Mk-IV MRT scope.
midSCarolina
09-27-12, 10:30
6.8SPC LWRC PSD
This one lives at my friend's house at the moment since he owns two of these LWRC SBR lowers... I am waiting on the stamp tax for two of my lowers so this will be all mine in 4-6 months. He brought it by for us to take it out to zero the other day so I took the opportunity to get a few pictures.
LWRC PSD Upper 6.8SPC
Aimpoint T-1 on LaRue LT751
Troy F&R BUIS
Tango Down Stubby QD
Hogue PG
CTR stock
http://i1115.photobucket.com/albums/k558/thornejc23/LWRC2-1.jpg
http://i1115.photobucket.com/albums/k558/thornejc23/LWRC_zps7fd0c247.jpg
http://i1115.photobucket.com/albums/k558/thornejc23/LWRC3-1.jpg
hockeynick39
11-12-12, 07:52
Here's my little 6.5 PCC, homebuild AR. Upper, lower, and BCG by Palmetto State Armory. 18" SS standard profile barrel by Black Hole Weaponry. Magazine, gas block, and gas tube by PRi. Stock by ACE, shorty entry (because I have shorter than normal wingspan;)). Yankee Hill Diamond Series free float tube, carbine length handguard. Red dot by Simmons in 30mm, but will be mounting a Nikon P223 Carbine BDC as soon as it arrives (was on back order, moved, and the USPS lost it, now I have to wait another month:cray:).
http://i1027.photobucket.com/albums/y338/hockeynick39/mypictures972.jpg
Case sizing process from .223 to 6.5:
http://i1027.photobucket.com/albums/y338/hockeynick39/mypictures971.jpg
A chronograph target from a sandbag @ 50 yds (I know, not that impressive, but accuracy is incredible with the red dot):
http://i1027.photobucket.com/albums/y338/hockeynick39/mypictures996.jpg
Here is a standard Birchwood-Casey 4"target circle @ 100 yds for fireforming cases, data is on paper:
http://i1027.photobucket.com/albums/y338/hockeynick39/mypictures1019.jpg
Have not got on any animals with it yet, because my move took me into deer season and 'have not had any time to do anything else with the cartridge yet. However, we'll see what winter brings with predators in Northern NH:eek:. Next builds will be 6x45mm w/ 18" bbl and 20 Tactical w/ a 24"bbl. Mostly to do some traveling p-dogs and predator hunting for retirement:cool:.
ICANHITHIMMAN
11-12-12, 10:37
Do you plan on testing a bigger bullet?
hockeynick39
11-12-12, 14:42
I've tested up to 140 gr with a little success. Out of the 18"bbl I was only getting up to 2200 fps with the wind at my back:D. I've shot 120 gr bullets up to 2400 fps too and may settle on that as my heavy load for deer and pigs in the woods. Otherwise I have a pretty good 100 gr SP @ up to 2600 fps for a little bit further distance for deer and prongohorn. Why did I go with this wildcat over the Grendel? I have issues with Mr. Alexander among other things. Otherwise it was just a simple case trim, barrel swap, and fireform to get it off the ground. So the price was right with minimal change in parts to an existing AR15 platform and it was an interesting project to me.
ICANHITHIMMAN
11-12-12, 15:28
I've tested up to 140 gr with a little success. Out of the 18"bbl I was only getting up to 2200 fps with the wind at my back:D. I've shot 120 gr bullets up to 2400 fps too and may settle on that as my heavy load for deer and pigs in the woods. Otherwise I have a pretty good 100 gr SP @ up to 2600 fps for a little bit further distance for deer and prongohorn. Why did I go with this wildcat over the Grendel? I have issues with Mr. Alexander among other things. Otherwise it was just a simple case trim, barrel swap, and fireform to get it off the ground. So the price was right with minimal change in parts to an existing AR15 platform and it was an interesting project to me.
Ya I here everything your saying, I think I'm going with the LBC myself.
hockeynick39
11-12-12, 17:35
The LBC is the Les Baer version of the Grendel right? Heard some pretty good things about it and hope it works out for you. I think you should be able to get a little more umph with it using 144 gr pills, could be wrong (been known to happen a time or two;)). What part of NY? I grew up in Rochester area and just moved from the Adirondacks to White Mountains of NH due to job.
freefalle7
11-22-12, 19:57
http://pic80.picturetrail.com/VOL965/4056977/23984833/404650514.jpg
https://lh6.googleusercontent.com/--i1aGod7ZRs/UNkwRwGuVII/AAAAAAAAAQY/lUQOWjowOCU/s1024/rps20121224_224846.jpg
https://lh3.googleusercontent.com/-GpgpsVzdO1c/UNkv9_BR8BI/AAAAAAAAAQI/sw5zZuiMwVg/s1024/rps20121224_224727_760.jpg
6.8 SPCII
Noveske FFL and forged upper rec.
KAC URX III rail
Daniel Defense barrel, BCG, and LPK
Geissele SSA trigger
Magpul ACS-L stock
Bushnell Tactical 3-12x44 G2DMR reticle in ADM scout mount
Atlas bipod
http://img.photobucket.com/albums/v651/PhotoTWB/Weapons/Knights%20Armament%20SR25/SR25EMC.jpg
Wormydog1724
01-13-13, 11:38
http://i416.photobucket.com/albums/pp247/wormydog1724/IMG_0031_zps5e676bec.jpg
Camo gun is 6.8 SPC
Noveske Afghan upper on a stock Colt lower with UBR. Optics are the Leupold MK4 1.5-5x20mm MR/T M2 Illum reticle, Troy front wih XS tritium stripe and troy rear.
Carbine is holding under MOA to 250 meters with Hornady V-max and SSA enhanced frag combat loads. Need to slap my SPR lower on it to see what it can really do but its more than accurate/reliable enough for my needs (hunting/banging steel) as is.
Camo is Brownells Alumahyde II OD with Dark Earth overspray.
Plan to try some of the Accubonds when i get stateside next.
http://img296.imageshack.us/img296/7430/cimg0022tt7.jpg
http://img296.imageshack.us/img296/8560/cimg0028vb7.jpg
sick rifle, love the finish
http://i416.photobucket.com/albums/pp247/wormydog1724/IMG_0031_zps5e676bec.jpg
Camo gun is 6.8 SPC
how do you like that round? 6.8?
Remington R-15 .450 Bushmaster and CMMG .300BLK.
15187
YHM Upper on my Bushmaster lower w/ 6.8 Acog
15314
http://www.m4carbine.net/attachment.php?attachmentid=15717&d=1362438498
The tank... It just occurred to me today I need to put name brand scope rings on it...
Older AA .50 beowulf overwatch.
Wormydog1724
03-04-13, 23:10
how do you like that round? 6.8?
Sorry its taken me so long to see this. Yes the camo gun is 6.8. I use it for coyote hunting and it is simply devastating. I've had several coyotes run off from decent hits from .223 55 grain ballistic tips (accutips and v-max) so I decided to go bigger. 110 grain V-Max is awesome. 250 yards is the farthest I've hit a coyote with it, granted it was in the head. I hit one coyote in the middle of the body, in the guts. I am certain she would have spun and ran off from a .223, I've seen it happen. The 6.8 dropped her, a few kicks but she soon expired. As far as I'm concerned, this is the round for close to mid-range work on the AR platform. If only ammo were cheaper/available. I feel it will become more available and hopefully drop in price, but not if idiots continue to add gas to the fire.
vBulletin® v3.7.2, Copyright ©2000-2013, Jelsoft Enterprises Ltd.