Colt

[C4IGrant]

I currently have the following Colt AR's in stock. This list will be changing constantly so please check back often for updates.


C4



Colt 6721

SPECS: http://www.colt.com/law/ar15a3.asp

http://www.colt.com/law/images/ar15a3.jpg


Colt 6920 $1550
SPECS: http://www.colt.com/law/lecarbine.asp

http://www.colt.com/law/images/m4.jpg


Colt 6520
SPECS: http://www.colt.com/law/ar15a2.asp

http://www.colt.com/law/images/ar15a2.jpg


Colt 6450

http://www.gandrtactical.com/images/archive/Colt/6450.jpg


Colt 6430 (9mm) PRE-BAN

SPECS:

Brand New
A1 Carry Handle and Stock
Pinned 9mm receiver block
Two 20rd mags (with steel followers)
Pre-Ban (very low serial number)
Pencil barrel

http://www.gandrtactical.com/images/archive/Colt/6430.jpg

http://www.gandrtactical.com/images/archive/Colt/6430%20close%20up.jpg

[Cold Zero]

Is the 6721 similiar to the 6920, or is it more like a 6520, barrel twist rate aside?

Thanks.

[C4IGrant]

Is the 6721 similiar to the 6920, or is it more like a 6520, barrel twist rate aside?

Thanks.


It is closer to the 6921 line IMHO.


C4

[SHIVAN]

Can you get just the "standard" Colt LE lowers??? The ones with the standard trigger pins and push pins?

[C4IGrant]

Can you get just the "standard" Colt LE lowers??? The ones with the standard trigger pins and push pins?

Will check.


C4

[Bloodbathdisplay]

SHIVAN, maybe we could split an order, I want an A2 Colt upper and you want a LE Lower, so Grant...do you have anything that might accomodate both of us(provided SHIVAN is in)?

[C4IGrant]

SHIVAN, maybe we could split an order, I want an A2 Colt upper and you want a LE Lower, so Grant...do you have anything that might accomodate both of us(provided SHIVAN is in)?

I have no problem with that at all.



C4

[SHIVAN]

The problem is that the upper is more costly than the lower. How do we determine value for a carbine when the split would not be equal?

[Steve_Morrison]

FWIW All current production semi auto Colt LE guns have captive, .250" pivot and takedown pins with .170 fire control pins. Colt has been using the .250" pivot and takedown pins for quite some time now.

[SHIVAN]

...Colt LE guns...

Right, which is why I want an LE lower. Smaller chance I get some oddball pin sizes, from old stock, but new, lowers.

[C4IGrant]

The problem is that the upper is more costly than the lower. How do we determine value for a carbine when the split would not be equal?



You will need to work that out with the person you are going to split the weapon up with.



C4

[C4IGrant]

More Colt's in stock!


C4

[SethB]

I just got a 6920 for 1381 OTD (Damn tax) but I would have bought one from you...

So, BTT ;)

PS I will be passing this on to a friend, though.

[VA_Dinger]

Does Colt offer the Colt 6520 in an A3 configuration?

[C4IGrant]

Does Colt offer the Colt 6520 in an A3 configuration?


Nope. If you wan't we can remove the A2 upper and replace it with a flattop one.


C4

[ROSS4712]

Grant can you get Colt uppers like the LE6921 upper or the RO977 or RO933 uppers?

[rob_s]

Does Colt offer the Colt 6520 in an A3 configuration?
I sure wish they did, it would have saved me a whole lot of time, money, and effort. I put a flattop upper on mine, shaved down the FSB, installed a DD 9.0 and used a Troty flipup front sight (alright, ADCO did it all, but you get the idea :p ). That way I didn't have to worry about the non-F FSB, I got to keep the stock taper pins, and got a little extra heat protection from the barrel.

I'd love to see Colt do a flattop 6520, midlength gas, and a "F" FSB.

[C4IGrant]

Grant can you get Colt uppers like the LE6921 upper or the RO977 or RO933 uppers?

No uppers at the current time. I am however going after my Colt LE account (there are ZERO Colt LE Distr. in my entire state so I might have a good chance at getting an account).



C4

[C4IGrant]

I sure wish they did, it would have saved me a whole lot of time, money, and effort. I put a flattop upper on mine, shaved down the FSB, installed a DD 9.0 and used a Troty flipup front sight (alright, ADCO did it all, but you get the idea :p ). That way I didn't have to worry about the non-F FSB, I got to keep the stock taper pins, and got a little extra heat protection from the barrel.

I'd love to see Colt do a flattop 6520, midlength gas, and a "F" FSB.

You don't have to worry about the shorter FSB at all. You simply install a taller front sight post in the weapon for $5.



C4

[C4IGrant]

We have one Colt 6920 and a Pre-Ban 6430 (new) in stock!



C4

[Cold Zero]

We have one Colt 6920 and a Pre-Ban 6430 (new) in stock!



C4


some other vendors are backordered several hundred units of 6920. that one may be the only one in the land. someone should jump on that. this item will only be available for a matter of minutes, i'll bet.;)

b.t.w. not that i should be thinking about it:eek: , but what are the specs and the price on that pre ban 6430? thanks.

[C4IGrant]

some other vendors are backordered several hundred units of 6920. that one may be the only one in the land. someone should jump on that. this item will only be available for a matter of minutes, i'll bet.;)

b.t.w. not that i should be thinking about it:eek: , but what are the specs and the price on that pre ban 6430? thanks.

Check out page one for pics and info on the 6430.


C4

[C4IGrant]

6920's are in stock!



C4

[msr]

Any news on the lowers yet?

[C4IGrant]

Any news on the lowers yet?


Nothing new.

C4

[C4IGrant]

Colt 6450 9mm AR15's are in stock!



C4

[Nastynewt]

can a fill size 20" A2 Government model still be had from colt? Like the ones used in the 80's
Keith

[rob_s]

can a fill size 20" A2 Government model still be had from colt? Like the ones used in the 80's
Keith

Colt Commercial side (http://coltsmfg.com/cmci/rifles.asp) has two models.

[1911Gunner]

Grant,
Do you offer LE discounts?
I may be looking for a 6920 this spring.
Don

[C4IGrant]

Grant,
Do you offer LE discounts?
I may be looking for a 6920 this spring.
Don


Yes.


C4

[C4IGrant]

6920's are in stock!


C4

[WARRIOR46]

6920's are in stock!


C4


PM me how much for the 6920.:)

[SethB]

Grant, what have you got?

[C4IGrant]

Grant, what have you got?

I have 6920's in stock.


C4

[mpardun]

Please IM me if so and I'll call a card in.

Thanks,

Mike

[Dave L.]

I have 6920's in stock.


C4

How many do you have left?

[AirTrafficControl]

you still have any left?

[C4IGrant]

6920's are in stock!


C4

[sundance435]

Grant,

PM sent on LE price for 6920.

Thanks

[sundance435]

Also,

Do you ever get or order 6520's? If so, could you PM me a LE price for that as well, if you have one?

Thanks

[Rider79]

PM me a price on the 6920 please.

[rob_s]

6920's are in stock!


C4

Big hammer/trigger pins or small?

[C4IGrant]

Big hammer/trigger pins or small?

.154



C4

[C4IGrant]

Colt 6940's are in stock!

C4


http://www.gandrtactical.com/images/archive/Colt/6940.jpg

http://www.gandrtactical.com/images/archive/Colt/6940_Label.jpg

[chang-man]

Grant,

Please PM me with price on 6940?

Thanks Changman:)