Painting the barrel to prevent rust?

[bobafett]

Overkill or good idea?

I'm putting on a free float Quad rail so I consider that almost Permanent... Now I won't be able to take the handguards off to clean the barrel tSo is rust a considerable problem since it can't be maintained? Should I at least just paint under the rails?

I'd take the handguards off at least once a year to clean my rifle prior to this...

Appreciate the input :cool:

[RemMan700]

You could just Dura-coat the barrel. That would help.

[Quib]

Dilute some CLP with Odorless Mineral Spirits. Using a spray bottle, spray this mixture onto the barrel through the HGs. Follow up with compressed air to remove the excess.

[Robb Jensen]

Norrells moly resin or GunKote works well.

[markm]

Rust is just a temporary solution to a permanent problem.

[tylerw02]

GunKote is a great product. I've used it on precision rifles with good success.

[Mac5.56]

Rust is just a temporary solution to a permanent problem.

What do you mean by that?

For the OP, and other's has anyone ever done powder coating on barrels? Seems like it may work for what you need! I use to work at a shop that used the same powder coater in Portland OR as Benchmade. If it works for knife blades why not barrels? The finish is super slick, even, and very matte!

[jchtrh]

Cera-Kote is a great protective coating that works.

[mr.scott]

If you just want to protect it from rust and don't care what it looks like, go to the auto parts store and get a can of high temp header paint.

[Low Drag]

Flat black Rustoleum grill paint.

[Detmongo]

low grill
that's what i used recently. i picked up a barrel for a training gun, the barr. was brand new but had some suface rust pretty bad in some spots. i was able to removed all the rust degreased it and sprayed it down with the high temp version of the grill it looks great and has held up very well . this was done on the cheap (because i am) as this is a teaching/training rifle so it gonna get the crap beat out of it.:D