AR Picture Thread [Archive] - Page 27

bkb0000

07-30-10, 22:47

http://i605.photobucket.com/albums/tt134/rslamiroult/DSCF1327.jpg
http://i605.photobucket.com/albums/tt134/rslamiroult/DSCF1326.jpg
http://i605.photobucket.com/albums/tt134/rslamiroult/DSCF1323.jpg

i'm diggin the sullys. know how much they weigh? what RE do they use?

I sure like the looks of those Sully stocks. I wish they sold a filler for the rear sling mount slot and had a provision for a QD sling mount on the front, other that that, they are about perfect.

are they hollow? you could rig something. you could probably through-bolt an MI QD mount, or maybe even just drill and epoxy a sleeve in there.

the RRA Entry stocks are solid.

kmrtnsn

07-30-10, 22:56

Well, I just went to the DefensiveEdge website. It appears that they have answered my issue instantly and added QD points fore and aft on both sides and eliminated the gap where the old style rifle sling mount went. I think I'll order one in FDE and send it out to have it dipped in Multicam to match the rest of my rifle.

http://www.thedefensiveedge.com/ProductDetails.asp?ProductCode=SullyStockQDMounts

http://www.thedefensiveedge.com/v/vspfiles/photos/SullyStockQDMounts-2.jpg

CLEAR

07-30-10, 23:08

been lurking... here's my contribution.

http://i60.photobucket.com/albums/h18/j4k4rt4/AR%20parts/_MG_4202b.jpg

Noveske 16" 1/7P 5.56 SS Barrel (also have unbuilt 6.8SPC going into this upper)
Noveske marked VLTOR VIS-2A 10" (came with VIS N4 14.5")
Noveske marked TROY front & rear BUIS
Noveske marked TROY low profile gas block
Denny's Gun - Tactical Innovation 15-BDX Billet lower
M84 PRI Gasbuster Charging handle
RRA LPK sans trigger unit & LMT ambi-safety, KNS gen. 2 pins
Timney skeletonized Drop-in 3.5lbs Match trigger
NightForce NXS 2.5-10x24 NP-2
American Defense Recon 30mm mount
Young Manufacturing National Match Lite Bolt Carrier group & Colt Chromed bolt
Enidine - Buffer Technology Hydraulic Recoil buffer
Magpul UBR stock FDE sans storage covers
Magpul MIAD grip
Magpul PMAGs 10/20, 10/30 *cali-mode*
Magpul ladder rail covers
Raddlock magazine lock button *cali*
GG&G Extreme Duty swivel bipod
Samson Manufacturing Field Survival Tool Kit for MIAD
Surefire MB556AR muzzle brake
Surefire SCOUT M600C FDE LED light
Surefire HL-1 Helmet light on Tango Down 1913 rail mount
extras: Insight Technology AN/PEQ-15B, Eotech 553 FDE, TangoDown QD VFG FDE

kmrtnsn

07-30-10, 23:34

Is that a Surefire helmet light on there?

CLEAR

07-31-10, 00:01

Is that a Surefire helmet light on there?

Yes, I've since mount it on top rail, right behind front BUIS. The whole rifle narrower that way and fits better in my pelican case.

kmrtnsn

07-31-10, 00:02

Nice looking rifle there, Clear. Tell us a bit about it.

hkhunter

07-31-10, 08:43

been lurking... here's my contribution.

http://i60.photobucket.com/albums/h18/j4k4rt4/AR%20parts/_MG_4202b.jpg

Noveske 16" 1/7P 5.56 SS Barrel (also have unbuilt 6.8SPC going into this upper)
Noveske marked VLTOR VIS-2A 10" (came with VIS N4 14.5")
Noveske marked TROY front & rear BUIS
Denny's Gun - Tactical Innovation 15-BDX Billet lower
M84 PRI Gasbuster Charging handle
RRA LPK sans trigger unit & LMT ambi-safety, KNS gen. 2 pins
Timney skeletonized Drop-in 3.5lbs Match trigger
NightForce NXS 2.5-10x24 NP-2
American Defense Recon 30mm mount
Young Manufacturing National Match Lite Bolt Carrier group & Colt Chromed bolt
Enidine - Buffer Technology Hydraulic Recoil buffer
Magpul UBR stock FDE sans storage covers
Magpul MIAD grip
Magpul PMAGs 10/20, 10/30 *cali-mode*
Magpul ladder rail covers
Raddlock magazine lock button *cali*
GG&G Extreme Duty swivel bipod
Samson Manufacturing Field Survival Tool Kit for MIAD
Surefire MB556AR muzzle brake
Surefire SCOUT M600C FDE LED light
Surefire HL-1 Helmet light on Tango Down 1913 rail mount
extras: Insight Technology AN/PEQ-15B, Eotech 553 FDE, TangoDown QD VFG FDE

BRAVO! that is one honey of a boom stick you got there!

masternave

07-31-10, 10:30

Not that I would know... but that gun is a winner. Amazing.

newyork

07-31-10, 10:52

i'm diggin the sullys. know how much they weigh? what RE do they use?

are they hollow? you could rig something. you could probably through-bolt an MI QD mount, or maybe even just drill and epoxy a sleeve in there.

the RRA Entry stocks are solid.

They are solid. In the past a few people have drilled and epoxied in a QD point successfully. If you notice my 2 stocks are different. The N4 with the T1 has a Sully that used to have a rear traditional sling swivel that I removed. The other N4 has one that came without the swivel with no cut out for it because they stopped making with the swivel as noone wanted them.
I use a DD burnsed loop and it comes with a slightly longer screw to accomodate the extra length. The Sully comes as a complete kit with RE, buffer, buffer spring, screw and stock.
I wish I got the ones with the new QD spots but the burnsed loop works very well so I'm happy. Great stocks especially New Yorkers and ban staters.

justin_247

07-31-10, 12:02

Something basic....

http://stickman.rainierarms.com/galleries/BCM/868W0988-1024-Stick.jpg

It's a great day in the history of firearms when a 12.5" BCM "Kino" upper receiver w/ a DD free-float rail system, SOPMOD stock, and LMT fixed sight is considered to be "something basic." :)

u33smc

07-31-10, 12:35

Just wanted to say hi and thanks to all the members. I have been lurking for some time reading posts and learning. This site has helped me to learn much in a short amount of time. I have just finished putting together my 2nd AR and thought it's about time for my 1st post and some pics.

It's not really a build, I bought a BCM 16" middy upper from Bravo and a Spikes complete lower from Brownells, but it's just the way I wanted it. The only thing left (for now) is the EMOD stock I'll be purchasing shortly. Sorry for the low quality pics (I'm not much with a camera).

5723

5724

5725

Arclight

07-31-10, 16:26

Haha... love the dog feet in the shot. Nice twist on the tradition. :D

D90King - Great setup... I'll have to take pics of mine with the T-1 on it. The VTAC setup is so light and easy to throw around.

Pic thread!

http://i537.photobucket.com/albums/ff339/ArclightPB/Guns/VTACNoveske_E1.jpg

Noveske VTAC 16"
TA33 ACOG on LaRue Mount
Magpul MIAD
VLTOR IMod
VCAS Sling
AAC Blackout
Geiselle SSA trigger
Fail Zero BCG

Titleist

07-31-10, 17:19

http://farm5.static.flickr.com/4084/4847689290_697766a387_b.jpg

Daemonbane

07-31-10, 21:13

My DPMS rifle is retired to range toy, just assembled this lower to run my BCM 20" upper (no pictured due to horrid quality). Need a camera that isn't falling apart, :D

http://farm5.static.flickr.com/4130/4848162052_7d2368353e_b.jpg
http://farm5.static.flickr.com/4145/4848161944_5955c2dd8e_b.jpg
http://farm5.static.flickr.com/4150/4847539937_ff7a66b7de_b.jpg
http://farm5.static.flickr.com/4103/4847540031_1cd08e38ba_b.jpg

Going to try and take a picture of the lower with the BCM upper on it, the ACS stock feel right with the 20" upper.

Edit: Forgot to say the lower was assembled with G&R lower parts kit and the obvious magpul kit. Undecided what I'm doing with the upper at the moment.

Stickman

07-31-10, 21:26

It's a great day in the history of firearms when a 12.5" BCM "Kino" upper receiver w/ a DD free-float rail system, SOPMOD stock, and LMT fixed sight is considered to be "something basic." :)

I guess its all in the eye of the beholder. :)

Stickman

07-31-10, 21:27

http://stickman.rainierarms.com/galleries/Magpul%20V/IMGL4328-1024-Stick.jpg

RudyN

07-31-10, 22:56

Here is the start of my third AR.

http://i165.photobucket.com/albums/u74/Rudy43Norvelle/SEMI%20AUTO/SANY0023.jpg

AFM Lower
Magpul CTR Stock
RRA LPK
and since I live in California a Bullet Button.
I intend to buy a BCM midlength upper.

bkb0000

08-01-10, 00:29

Jeffu

08-01-10, 00:48

http://i567.photobucket.com/albums/ss111/denimtalk/Double.jpg

http://i567.photobucket.com/albums/ss111/denimtalk/LBCstudios-com.jpg

http://i567.photobucket.com/albums/ss111/denimtalk/MSAR556E4-1.jpg

http://i567.photobucket.com/albums/ss111/denimtalk/Black.jpg

http://i567.photobucket.com/albums/ss111/denimtalk/TripleTap.jpg

Stickman

08-01-10, 00:57

http://i567.photobucket.com/albums/ss111/denimtalk/MSAR556E4-1.jpg

Is that one of the MSAR AUG clones?

Why not throw the latches on the ACOG?

Jeffu

08-01-10, 01:02

Is that one of the MSAR AUG clones?

Why not throw the latches on the ACOG?

WOW stick! good eyes man

armakraut

08-01-10, 03:43

I need to get a couple of those surefire x300's

http://i27.tinypic.com/2jeaf87.jpg

http://i29.tinypic.com/2mrgvw4.jpg

BaileyMoto

08-01-10, 13:52

My babies:

http://www.mk12.net/bailey/mk12/angleSM.jpg

http://www.mk12.net/bailey/ARs.jpg

- Mk12 Mod 1
- M4ergy (14.5" LMT)
- .17hm2 spikes/ballistic advantage

AZ-Renegade

08-01-10, 14:09

http://i921.photobucket.com/albums/ad54/az-renegade/Firearms030.jpg

RudyN

08-01-10, 22:24

when/where'd you get the AFM lower?

when I bought it, they were in stock at my local Gun Store. Haven't seen any since, but then, I really haven't looked for them as I have a Stag lower sitting in the closet also waiting to be built up. The name of the store is San Jose Gun Exchange in San Jose, California

BaileyMoto

08-01-10, 22:30

http://i921.photobucket.com/albums/ad54/az-renegade/Firearms030.jpg

Very nice and clean. Is that that the Burris 1-4x?

bad timing

08-01-10, 23:04

http://i98.photobucket.com/albums/l249/FR0GMAN/EMCrearside-2.jpg

thegeneric

08-02-10, 14:03

http://img.photobucket.com/albums/v162/boredelmo/IMGP2319.jpg

Globemaster

08-02-10, 14:23

http://i911.photobucket.com/albums/ac314/AR15_Oly1/DSCN3553.jpg

http://i911.photobucket.com/albums/ac314/AR15_Oly1/RAlowerSN.jpg

N183CS

08-02-10, 14:37

I wasn't shooting my SPR enough, so I made it into a carbine.

Before:
http://i301.photobucket.com/albums/nn42/N183CS/102_4122.jpg
After:
http://i301.photobucket.com/albums/nn42/N183CS/100_4491.jpg

Cincinnatus

08-02-10, 14:59

http://farm5.static.flickr.com/4084/4847689290_697766a387_b.jpg

I'll quote the Joker from the first Batman movie: "Where does he get those wonderful toys!?"

eternal24k

08-02-10, 16:07

http://i911.photobucket.com/albums/ac314/AR15_Oly1/DSCN3553.jpg

http://i911.photobucket.com/albums/ac314/AR15_Oly1/RAlowerSN.jpg

love that front magwell roll mark, wish they just did that on the side, nice and simple

Titleist

08-02-10, 17:11

I'll quote the Joker from the first Batman movie: "Where does he get those wonderful toys!?"

haha, thanks man. And to answer your question, lots and lots of time spent in boring meetings.

apexcncshop

08-02-10, 20:36

Photoshop is fun, but Stickman needn't worry.

http://i903.photobucket.com/albums/ac234/apexcncshop/8110%20Extended/IMG_4639copy.jpg

texas12

08-02-10, 21:13

http://img709.imageshack.us/img709/9214/dscn1236t.jpg
http://img824.imageshack.us/img824/4716/dscn1231g.jpg

downbad

08-02-10, 21:40

Photoshop is fun, but Stickman needn't worry.

http://i903.photobucket.com/albums/ac234/apexcncshop/8110%20Extended/IMG_4639copy.jpg

what kind of forearm is that?

xjustintimex

08-02-10, 21:55

I really want that rifle setup

ALCOAR

08-02-10, 22:43

http://i27.tinypic.com/2hzluh4.jpg:)

PrivateCitizen

08-02-10, 23:02

what kind of forearm is that?

Looks like it might be this from Apex here (http://www.apexmachineshop.com/products_firearm_accesories.html).

I want this (http://www.apexcncmachine.com/store.php?seller=ApexMachiningCompany&navt1=19974&pd=2271628#images) big time for a RECCE build that retains the FSB

Atticus_1354

08-02-10, 23:33

Photoshop is fun, but Stickman needn't worry.

http://i903.photobucket.com/albums/ac234/apexcncshop/8110%20Extended/IMG_4639copy.jpg

What forearm is that?

AZ-Renegade

08-03-10, 01:04

Very nice and clean. Is that that the Burris 1-4x?

Yes sir, Got it a little over a year ago, I think it has the first generation reticle. Good optic IMHO.

firemedic679

08-03-10, 12:52

just finished building my first Ca legal AR. Spikes/BCM 16" Middy

http://i35.tinypic.com/2j2xh82.jpg
http://i37.tinypic.com/dom9zd.jpg

Spikes tactical lower
G&R tactical LPK
Bullet button
Magpul MIAD
Magpul CTR
BCM 16" light weight middy upper with DD 12.0 lite rail
BCM BCG and CH
AAC breakout Muzzle
magpul MBUS
Magpul AFG
Surefire M951
Eotech 516
Eotech 3X magnifier
Magpul 10/30 Pmag with ranger plates and bullet button tool installed

Dos Cylindros

08-03-10, 14:27

Stickman

08-03-10, 15:29

What forearm is that?

APEX

Check out the below link for more information.

http://militarytimes.com/blogs/gearscout/2010/07/19/apex-rails/

http://militarytimes.com/blogs/gearscout/wp-content/blogs.dir/5/files/apex-machine-rail/868w0587-800-stick.jpg

chavez_e_chavez

08-03-10, 15:51

APEX

http://militarytimes.com/blogs/gearscout/wp-content/blogs.dir/5/files/apex-machine-rail/868w0587-800-stick.jpg

that is one hot arse Rifle..I Love it!!!:dance3::dance3::dance3:the rail really sets it off!!!!

Sierrahotel83

08-03-10, 16:00

Hmmm I think I found a new option for a rail on my rifle... need one that I do not need to remove the front sight to use... would this be feasable on if the FSB is ground down to make it lo profile.

ROGOPGEAR

08-03-10, 16:40

http://i911.photobucket.com/albums/ac314/AR15_Oly1/DSCN3553.jpg

http://i911.photobucket.com/albums/ac314/AR15_Oly1/RAlowerSN.jpg

that's hot...my next lower from my favorite distributor.

Caeser25

08-03-10, 17:22

Hmmm I think I found a new option for a rail on my rifle... need one that I do not need to remove the front sight to use... would this be feasable on if the FSB is ground down to make it lo profile.

Looks like the can fits inside it so most likely. I ground down my fsb to git under a DD Lite so most anything is possible.

Globemaster

08-03-10, 17:51

that's hot...my next lower from my favorite distributor.
they are nicely manufactured (MMS I'm sure!) and they’re not just a ‘distributor’ anymore; as they had a Grand Opening last Saturday morning at their New location and Showroom; and I was the first one through the door that morning; as John invited a few of us in for a cup of coffee just before the event kicked off at 10:00 :D

http://i911.photobucket.com/albums/ac314/AR15_Oly1/DSCN3505.jpg

I got some cool swag! a free Pmag® [(1) to the first 50 through the door] and a killer/stylish Rainier Arms® lower receiver.

http://i911.photobucket.com/albums/ac314/AR15_Oly1/DSCN3515.jpg

Stickman

08-03-10, 18:34

Hmmm I think I found a new option for a rail on my rifle... need one that I do not need to remove the front sight to use... would this be feasable on if the FSB is ground down to make it lo profile.

Yes, I don't see any trouble with that at all. Its pretty wide inside.

http://militarytimes.com/blogs/gearscout/wp-content/blogs.dir/5/files/apex-machine-rail/868w0575-800-stick.jpg

wild_wild_wes

08-03-10, 22:21

http://i911.photobucket.com/albums/ac314/AR15_Oly1/DSCN3505.jpg

My new screensaver!

apexcncshop

08-03-10, 22:34

Yeah, that is an "extended carbine" model Apex Handguard System. In keeping with the picture thread rules, here is a field of flowers (and an AR).

http://i903.photobucket.com/albums/ac234/apexcncshop/8110%20Extended/IMG_4631.jpg

(Extended Mid)

armakraut

08-03-10, 22:35

Apex, is that a 14.5 or 16'' middy?

apexcncshop

08-03-10, 22:36

http://i911.photobucket.com/albums/ac314/AR15_Oly1/DSCN3505.jpg

That will be one good store, they have great stuff!

apexcncshop

08-03-10, 22:46

Apex, is that a 14.5 or 16'' middy?

Rifle is not in front of me right now, but I believe that one is a pinned 14.5.

http://i903.photobucket.com/albums/ac234/apexcncshop/8110%20Extended/IMG_4617.jpg

16 inch carbine for comparison.

norcuron

08-03-10, 23:56

SKULL1

08-03-10, 23:58

http://farm5.static.flickr.com/4079/4858743441_8274d1d1cd_b.jpg

bkb0000

08-04-10, 00:23

it looks light

xbmxracerx

08-04-10, 09:05

Purchased my first M4 and it finally arrived today. Thanks to reading this site I think I made a great choice. It's a DDM4V3 and I put on an Eotech EXPS3-0. Can't wait to shoot it.
5757

Good choice!

p.s. the attachment is invalid.

Stickman

08-04-10, 10:22

A few different Magpul Unicorns in this shot.....

http://stickman.rainierarms.com/galleries/KAC/868W0984-1024-Stick.jpg

memberonly

08-04-10, 10:35

http://img835.imageshack.us/img835/9011/19sh.jpg

l3mon

08-04-10, 10:45

A few different Magpul Unicorns in this shot.....

http://stickman.rainierarms.com/galleries/KAC/868W0984-1024-Stick.jpg

Why don't they make translucent p-mags? I'd buy all of them

glockeyed

08-04-10, 10:46

omg proof guns can just "go off"!!!

lol great shot

Cameron

08-04-10, 11:22

Why don't they make translucent p-mags? I'd buy all of them

Those were prototypes and all the ones I had broke at the feed lips.

Cam

Rated21R

08-04-10, 13:32

It's finally done (well not completely, need my Battle Comp and a few other bits) but it's ready to rock and roll.

http://img31.imageshack.us/img31/584/dsc0047rv.jpg

moose01

08-04-10, 13:50

How long is the barrel/handguard combo? Looks good!

Rated21R

08-04-10, 14:27

How long is the barrel/handguard combo? Looks good!

12.5 inch DD barrel, 10 inch Lite rail.

Thanks. :D

bkb0000

08-04-10, 14:51

It's finally done (well not completely, need my Battle Comp and a few other bits) but it's ready to rock and roll.

http://img31.imageshack.us/img31/584/dsc0047rv.jpg

whats this guy weigh in at, know?

im out of semi interesting pics

alexd92

08-04-10, 15:47

http://i204.photobucket.com/albums/bb82/sgtpile/Service%20Rifle/P1010640.jpg

Stickman

08-04-10, 16:33

Why don't they make translucent p-mags? I'd buy all of them

They don't meet Magpuls standards, so they never went past prototypes.

number1olddog

08-04-10, 17:01

Here's my Buddies Colt HBAR 16".
He has had this since 98 and recently added all the furniture and accessories.

I think it's all self-explanatory. He is also a certified Duracoat finisher and I believe he used Flat dark earth..:big_boss:

http://i1018.photobucket.com/albums/af302/J-Markert/0023.jpg

xbmxracerx

08-04-10, 17:05

Stickman,

Since you have contacts within the Magpul family, how about asking them about the equipment in this video (http://www.youtube.com/watch?v=G02WjXBmoss). I would like to see if they will be offered to the public. (Mag, stock, grip and handguards either in this camo design or digital)

They don't meet Magpuls standards, so they never went past prototypes.

Richard Belott

08-04-10, 17:19

Thanks for posting the pic for me Jason

Magsz

08-04-10, 17:20

My first contribution:

http://a.imageshack.us/img823/5377/noveskear151of1.jpg (http://img823.imageshack.us/i/noveskear151of1.jpg/)

Moose-Knuckle

08-04-10, 17:42

Purchased my first M4 and it finally arrived today. Thanks to reading this site I think I made a great choice. It's a DDM4V3 and I put on an Eotech EXPS3-0. Can't wait to shoot it.

http://i266.photobucket.com/albums/ii260/onerad1/photo.jpg

That is one hell of a first AR, congrats! :cool:

It's finally done (well not completely, need my Battle Comp and a few other bits) but it's ready to rock and roll.

http://img31.imageshack.us/img31/584/dsc0047rv.jpg

Well played sir, well played. . . :cool:

Kiwi

08-04-10, 19:09

Those were prototypes and all the ones I had broke at the feed lips.

Cam

Maybe they should do what L5 does - reinforce with metal bits at feed lips. But then again it would defeat the name "P"mag :p

Quiet-Matt

08-04-10, 19:26

Nice shot Memberonly.

Pic thread:
http://lh3.ggpht.com/_5kA3JwNkBxc/TFoAH59xS7I/AAAAAAAAGQ0/-qBpJbOoJ_I/s720/mms_picture.jpg

Stickman

08-04-10, 21:14

Light weights that need new clothes...

http://stickman.rainierarms.com/galleries/BCM/868W1139-1024-Stick.jpg

norcuron

08-04-10, 21:38

Well shot the DDM4V3 for the first time today. It was actually first time I have ever shot an M4. I sighted in the Eotech EXPS3-0 at 25 yards and shot the following 2 groups. I had a bench to rest on but no sand bags etc. I didn't think this was too bad but yeah I know it could have been better (first time ever using holographic site). It sure would have taken care of the bad guys. It was a blast !!

http://i266.photobucket.com/albums/ii260/onerad1/Pic2.jpg

http://i266.photobucket.com/albums/ii260/onerad1/photo-1.jpg

xbmxracerx

08-04-10, 22:17

[QUOTE=norcuron;725261]Well shot the DDM4V3 for the first time today. It was actually first time I have ever shot an M4. I sighted in the Eotech EXPS3-0 at 25 yards and shot the following 2 groups. I had a bench to rest on but no sand bags etc. I didn't think this was too bad but yeah I know it could have been better (first time ever using holographic site). It sure would have taken care of the bad guys. It was a blast !!

Nice job! I'm waiting for my ACOG to get in so that I can zero both iron and optics at the same time.......

memberonly

08-04-10, 22:34

Nice shot Memberonly.

Pic thread:
http://lh3.ggpht.com/_5kA3JwNkBxc/TFoAH59xS7I/AAAAAAAAGQ0/-qBpJbOoJ_I/s720/mms_picture.jpg

Thanks. I like the idea of replacing the torx screw on your BAD lever.

airjacobs

08-05-10, 10:08

It's a complete Stag Model 2, not a build. Came with the Midwest Industries BUIS. Think a MIAD will be my only mod on this one, decided to forego optics on this carbine.

DREK

08-05-10, 12:55

Base is XR15 S.D.I. 14"5

http://img153.imageshack.us/img153/6013/m4drek.jpg

n0mads1l0

08-05-10, 18:46

messed with PS a lil..... sucks but with some more tweeking....

I GIVE YOU M855........

http://i762.photobucket.com/albums/xx265/smithprotection/m855.jpg

and my 10.5" custom build.. it got wet.

http://i762.photobucket.com/albums/xx265/smithprotection/1265317931.jpg

thegeneric

08-05-10, 21:30

I just bought my first AR-15 two weeks ago. RRA Varmint 24in. Love the gun, love the upgrades I put on it. Here's a pic:

http://img.photobucket.com/albums/v162/boredelmo/IMGP2319.jpg

My problem is that it isn't unique. The same problem exists in the car world (my old hobby). Everyone likes certain colors, brands, wheels, suspension etc...and many cars end up looking the same.

After assembling all the parts, a VERY similar AR15 (only difference was scope mount/scope) popped up in my local gun classifieds forum.

After doing some digging....I found this pic:

http://img.photobucket.com/albums/v162/boredelmo/KYS_7376_crop.jpg

Used up all my funds so far, so I won't be able to do this soon, but that is what I am going to do to make my AR15 unique.

So my question to you guys: What makes your AR15 unique? Custom made stock? Odd configuration? Odd caliber? I'd like to see pics!

*Note* I understand many of you will claim "Hey hey, function over form, it goes bang every time, blah blah blah" but we must all admit that aesthetics does come into play sooner or later when making buying decisions.

Arclight

08-06-10, 07:15

thegeneric: There are many like it, but this one is mine.

While it's certainly not unique, at least the pseudo-digital camo pattern with the rail cover configuration is less common and makes it stand out in a crowd.

http://i537.photobucket.com/albums/ff339/ArclightPB/NoveskeCompM3Pics_E3.jpg

jwfuhrman

08-06-10, 09:51

Im no Stickman, but I try my best

My Recce/3gun Build

http://i6.photobucket.com/albums/y201/paintballaddict/Recce-3gun.jpg

jklaughrey

08-06-10, 15:16

Colt 6940
Magpul Furniture
Smith Vortex FH
FZ BCG
Vltor Mod 4 CH
BAD lever
Aimpoint CompM4s with Larue M4 mount (tall)
Aimpoint 3x mag with Larue QD Flip Mount

Mega

08-06-10, 15:21

Nice.
The OD is different. That's the only color I haven't done yet.

Arclight

08-06-10, 17:47

Keepin' it moving....

http://i537.photobucket.com/albums/ff339/ArclightPB/Guns/VTACNoveske_E4.jpg

Pirate EC

08-06-10, 18:07

http://img404.imageshack.us/img404/4253/m4ret.jpg

esrice

08-06-10, 18:38

Always changing configurations. Here are some recent ones:

http://i50.tinypic.com/nbd6gx.jpg

http://i48.tinypic.com/30igy03.jpg

http://i46.tinypic.com/28lxuz7.jpg

mtr5360

08-06-10, 20:23

http://i870.photobucket.com/albums/ab270/mtr5360/LMT%20MRP/LMTMRP5.jpg

Mike123

08-06-10, 21:38

First build...

Mike123

08-06-10, 21:49

Light weight carbine...

Arclight

08-07-10, 07:40

Light weight carbine...

Nice. Light, simple, effective. MOE makes it easy.

Pic Thread:
http://i537.photobucket.com/albums/ff339/ArclightPB/LadyJulyPic2.jpg

Stickman

08-07-10, 12:49

http://stickman.rainierarms.com/galleries/BCM/868W1004-1024-Stick.jpg

Mike123

08-07-10, 14:11

Thanks Arclight, that's what I was going for.

RetreatHell

08-07-10, 14:26

BCM 12.5" Kino... Awesome gun, shitty pics!! lol!

I'll eventually get some better ones, but this is what I got for now:)

http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20Kino%20SBR/DSCF1687.jpg

http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20Kino%20SBR/DSCF1726.jpg

PrivateCitizen

08-07-10, 14:47

http://stickman.rainierarms.com/galleries/BCM/868W1004-1024-Stick.jpg

This is gonna be the new RECCE-type trend, I'd wager. Add a 1-4x and it is golden.

ROGOPGEAR

08-07-10, 17:32

This is gonna be the new RECCE-type trend, I'd wager. Add a 1-4x and it is golden.

I'll pass on the 5-6 extra ounces of unnecessary weight added to the end of my barrel.

TOMTOM

08-07-10, 17:52

http://i737.photobucket.com/albums/xx14/TD236/photo3.jpg

wwhateley

08-07-10, 20:05

Here's a couple pics showing some of the stuff.

http://www3.telus.net/hansonk/m16kit.jpg

And the dedicated NV 556 upper with the 9mm all in one kit.

http://www3.telus.net/hansonk/nvand9mmkit.jpg

How did you manage to make the cutouts in the foam so perfectly? Was this custom made?

Dos Cylindros

08-07-10, 20:11

http://stickman.rainierarms.com/galleries/BCM/868W1004-1024-Stick.jpg

You went and did it. I knew they would be comming out with a dissy style upper. Looks like the perfect compliment for a set of rifle length MOE.

Dos Cylindros

08-07-10, 20:12

The Solid

08-08-10, 12:22

Well here is my humble submission....This was my first and only complete build to date. Really happy with it and it is one sweet shooter.
Some specs:
RRA stripped lower w/ RRA lpk
Vltor clubfoot with vltor buffer tube/endplate
MOE grip
CMMG stripped upper
DD CHF 16" midlength barrel
S&W bolt/BCG
DD omega midlength rail
Surefire G2L w/ Vikings tactics mount
Vickers/Blueforce Gear sling
KAC 300m rear buis
Aimpoint ML3 2 moa in a dreaded arms mount....lol.
Some Magpul xtms
Chopped Tangodown vfg/handstop...

http://i1018.photobucket.com/albums/af301/jandswyo/foliagear001.jpg

Titleist

08-08-10, 14:16

http://farm5.static.flickr.com/4135/4872301387_d1085afbcf_b.jpg

AMT308

08-08-10, 17:37

Here's a shot of my toys:

http://m4carbine.net/picture.php?albumid=268&pictureid=1299

INTrooper4255

08-08-10, 18:08

http://farm5.static.flickr.com/4135/4872301387_d1085afbcf_b.jpg

Who's bolt carrier group is that??

Thanks in advance!:)

mrbieler

08-08-10, 18:35

That Kino just looks awesome. Very nice. :D

Titleist

08-08-10, 18:36

It's the newest revision "sand cut" carrier out of the Knights SR-25.

sadmin

08-08-10, 21:45

Here's a shot of my toys:

Cool photo. I bet the high-res version is really neat. Something about vintage wood that looks so cool. Nice toys as well!

WILCO:
http://i7.photobucket.com/albums/y283/r3h4b/CIMG0228-1.jpg

ALCOAR

08-08-10, 21:53

http://i34.tinypic.com/2i0ciud.jpg:)

Rusty_Shackleford

08-09-10, 12:06

Lower:
Quentin Defense “Chatterbox Edition “Billet Lower
Daniel Defense LPK
RRA Ambi-Star Safety Selector
Timney 3lb. Skeletonized Trigger
Ergo Sure Grip
A2 Butt Stock
Troy Ind. Ambidextrous Q.D. A4 Sling Adaptor

Upper:
Larue 20” Tactical Stealth Billet Upper
Mil-spec HP MP BCG
Larue Tactical 13.2 Hand Guard
Troy Front & Rear Sights
KAC Rail Panels
Larue SPR 1.5 Scope Mount
Leupold 3x9x40 Mil-dot Scope
Larue Q.D. Bipod Mount
Harris 3” - 9” Bipod

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue1.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue3.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue2.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue4.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue5.jpg

Dos Cylindros

08-09-10, 13:10

BCM + KAC = win

http://i913.photobucket.com/albums/ac335/4N20/DSC_0155.jpg

santi210

08-09-10, 17:32

http://i104.photobucket.com/albums/m182/santi210/EBAY/DSC00777.jpg
http://i104.photobucket.com/albums/m182/santi210/EBAY/DSC00773.jpg
http://i104.photobucket.com/albums/m182/santi210/EBAY/DSC00772.jpg

palisut

08-09-10, 17:54

Here's a family photo.
L to R:
-LMT MWS .308
-Colt LE6920 x 2. The brown one is my primary go-to rifle.
-Stripped Noveske lower, destined for SBR-hood.
-Colt 9mm carbine
-"Retro" M16A1 clone build (Mostly Colt/GI w/ Rock River stripped lower and Stag LPK)

http://i8.photobucket.com/albums/a6/waveman1978/DSC00620.jpg

RetreatHell

08-09-10, 18:44

A few pics from a night shoot I attended the other night. All guns were suppressed and only night vision and IR aiming lasers/illuminators were used, with the exception of one guy's visible red laser. These were taken in complete darkness, IIRC the photographer said he was basically using a very long exposure to capture the images like this. I'm sure Stickman could explain that better though, as it's above my head.

The photographer gave me his permission to post these photos here on M4Carbine.

Me shooting some steel downrange, using an ACOG with a badass PVS-22 mounted in front of the optic. I've never used a PVS-22 before, it was an amazing experience. It belongs to Victor of TNVC, he was very gracious in letting us borrow it for the shoot!
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-15.jpg

A .22 upper on a registered full auto M16 lower. Shooter is wearing helmet mounted NODs, with a PEQ-2 on the gun.
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-12.jpg

Shooter with visible red laser and helmet mounted PVS-14 NV monocular
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-8.jpg

Dos Cylindros

08-09-10, 18:51

glockeyed

08-09-10, 20:11

wicked cool shots RH!! :cool::cool:

ALCOAR

08-09-10, 20:23

Did anybody happen to mention that Retreat's pics are freaking SWEET:D Great effects on those shots.

pic:)
http://i34.tinypic.com/5ea4g4.jpg

xcibes

08-09-10, 21:45

Colt MT HBAR

http://i23.photobucket.com/albums/b379/xcibes/Helmets/DSC_0200.jpg

armakraut

08-09-10, 22:52

What's the weight on that MRP as configured?

Did anybody happen to mention that Retreat's pics are freaking SWEET:D Great effects on those shots.

pic:)
http://i34.tinypic.com/5ea4g4.jpg

RetreatHell

08-09-10, 23:11

Did anybody happen to mention that Retreat's pics are freaking SWEET:D Great effects on those shots.

Thanks, guys! I agree, the man behind the camera did a pretty damn good job. I didn't know what to expect, since it was SO dark and there weren't any lights on at all, until he showed me one of the shots on the camera's LCD screen. I thought it was pretty crazy he could do that, I didn't know that stuff was possible. Pretty cool!

In this pic, the steel plate is being engaged, and all the light downrange is strictly IR illumination.
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-4.jpg

He captured a round impacting on the steel plate
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-10.jpg

Same bullet impact as above, just zoomed in close (hence the slight distortion)
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-11.jpg

ALCOAR

08-09-10, 23:39

What's the weight on that MRP as configured?

On my Bass fishing digital scale it just weighed in at 7lbs. 9oz. (weight includes the 30rd pmag filled w. 55gr. vmax)

edit.... I was just putting that gun up and popped the mag and saw it was empty rather than full, so the weight above includes the pmag with no ammo loaded in it.

ALCOAR

08-09-10, 23:47

Thanks, guys! I agree, the man behind the camera did a pretty damn good job. I didn't know what to expect, since it was SO dark and there weren't any lights on at all, until he showed me one of the shots on the camera's LCD screen. I thought it was pretty crazy he could do that, I didn't know that stuff was possible. Pretty cool!

In this pic, the steel plate is being engaged, and all the light downrange is strictly IR illumination.
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-4.jpg

He captured a round impacting on the steel plate
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-10.jpg

Same bullet impact as above, just zoomed in close (hence the slight distortion)
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-11.jpg

Keep em coming pal...those really are spectacular images. On the first one I wonder if those 2 rearward shooting sparks are actually extremely small sized specs of burning powder. The last image is prob. my favorite, and anybody that questions the asskicking power of an .223/5.56....see above:cool:

Some of the other folks that have the badass IR units and NV setups should take a hint from your style on these pics. Only other really cool shots Ive seen personally like yours above IIrc were from MilitaryMoron and featured a Scar in a desert locale shooting steel at night.

Magpuller

08-10-10, 09:44

http://tiny.cc/x2elc
http://tiny.cc/89wr5
http://tiny.cc/rr5rq
http://tiny.cc/29lm2
Almost done with this one. Just a few more things I need to buy.

stifled

08-10-10, 09:54

Here's my 20" BCM I recently finished (I think...). The only change I have made is removing the BUIS, which I just don't see being used. The optic works perfectly well if batteries run out, and this is for long range plinking so if something more catastrophic happens my day won't get much worse (since no one will be shooting back...)

Specs:
20" BCM upper
Midwest Industries SS-15 handguard
BCM BCG and full auto bolt
Burris XTR 1-4x24mm on a Larue mount

Aero Precision lower
Bushmaster parts kit
Geissele Super Semi trigger
Magpul CTR stock
CMMG ambidextrous safety (though now I want a BAD-ASS)

http://i30.tinypic.com/2uetbgm.jpg
http://i32.tinypic.com/2qxuzrb.jpg
http://i28.tinypic.com/6gebee.jpg
http://i30.tinypic.com/20001l.jpg

And here's the Pelican case I bought for it. Don't mind the chalk marks I hadn't washed off yet... and don't make fun of my cutting job; I'm relatively happy with it, but the places I made to pull out the magazines turned out horrible. Anyone have a suggestion for cutting more regular, even half circles in this foam before I glue it? I might end up just cutting squares to replace the circles if I can't get something figured out.
http://i35.tinypic.com/2h6rh3t.jpg

It's quite a shooter.

kratosx9

08-10-10, 10:50

Here's my contribution....

http://img.photobucket.com/albums/v477/kazuyajin69/100_9305.jpg
http://img.photobucket.com/albums/v477/kazuyajin69/100_9304.jpg
http://img.photobucket.com/albums/v477/kazuyajin69/100_8931.jpg

RetreatHell

08-10-10, 12:31

Keep em coming pal...those really are spectacular images. On the first one I wonder if those 2 rearward shooting sparks are actually extremely small sized specs of burning powder. The last image is prob. my favorite, and anybody that questions the asskicking power of an .223/5.56....see above:cool:

Some of the other folks that have the badass IR units and NV setups should take a hint from your style on these pics. Only other really cool shots Ive seen personally like yours above IIrc were from MilitaryMoron and featured a Scar in a desert locale shooting steel at night.

Thanks dude. I agree, they're pretty badass pics. Just wanna emphasize again though that they were NOT taken or edited by myself in any way. I don't want to take anything away from the photographer who took the pics. I'm just posting them for him.

Here's another pic of me, taken just before I pulled the trigger in the one above
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-14.jpg

Here's a direct view through the PVS-22, looking downrange at the steel silhouette target that's being lit up with an IR aiming laser. I can't say enough just how badass this thing was, and how awesome it is that TNVC actually let us borrow it! Looking through a Night Force scope with mil-dot reticle that one shooter had mounted on a really sweet Mk12 Mod 0, with the PVS-22 sitting in front of it, was one of the coolest things I've ever seen!
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-18.jpg

Shooter is engaging targets with full-auto .22 caliber AR (same one from earlier pic), illuminating target with his PEQ-2
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-13.jpg

Titleist

08-10-10, 12:37

Some of the other folks that have the badass IR units and NV setups should take a hint from your style on these pics.

Yeah...usually the NOD units are all being used to shoot targets when we go night shooting. And it's usually on moonless nights ;)

Nice pics, Paul.

RetreatHell

08-10-10, 12:45

Yeah...usually the NOD units are all being used to shoot targets when we go night shooting. And it's usually on moonless nights ;)

Nice pics, Paul.

Why do you think there are no pics of my blaster or anyone else's that was there? There was some badass shit there, and I really wish now that I would've gotten some pics, but in between shooting and just bullshitting with friends, it was honestly the last thing on my mind.:D

I wanted to get some cool NV video of me shooting towards the end, but I waited too long and it was bad timing. So I'll try and do that next time.

stifled

08-10-10, 13:03

http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-18.jpg

Great. One image that is going to cost me about $9-10,000. Thanks a lot! :(

Really nice series of pictures though. The wide field shot with the lasers going across the water is awesome, also a liberal's nightmare... :)

Titleist

08-10-10, 13:15

The wide field shot with the lasers going across the water is awesome, also a liberal's nightmare... :)

Imagine that but even cooler with the PEQ-15s, which can generate actual patterns. I shit you not, it can kick out a triangle. It's goddamn predator!

d90king

08-10-10, 16:38

Some great pics Paul, thanks for posting them for all to check out with envy! Very well done, looks like it was a blast.:neo:

The one where the stars are so bright is very cool too... Some damn cool kit there...

Cameron

08-10-10, 19:45

My wife's new Bravo Company Manufacturing 14.5" Mid Length!!

After my great experience purchasing a BCM MK12 SPR, my wife was begging for a lighter rifle that she would enjoy shooting. With the expert advice from the BCM pros we took the recommendation of a:

BCM Standard 14.5" Mid Length Upper Receiver Group with Daniel Defense LITE 12" rail (http://www.bravocompanyusa.com/BCM-14-5-Mid-Length-Upper-Receiver-Daniel-Defense-p/bcm-urg-mid-14%20ddl12.htm) on BCM Lower Receiver Group (http://www.bravocompanyusa.com/BCM-Lower-Receiver-Groups-M4-AR15-s/117.htm).

They added BCM/Troy sights (http://www.bravocompanyusa.com/BCM-Folding-Battle-Sight-REAR-p/bcm%20rear%20sight%20troy.htm), BCM bolt carrier group (http://www.bravocompanyusa.com/BCM-Bolt-Carrier-Group-MPI-Auto-M16-p/bcm%20bolt%20carrier%20group%20auto%20mp.htm), BCM Gunfighter charging handle (http://www.bravocompanyusa.com/BCM-GUNFIGHTER-Charging-Handle-GFH-Mod-4-p/bcm%20gfh%20mod%204%20556.htm), and permanently installed a PWS FSC556 Comp (http://www.bravocompanyusa.com/Primary-Weapon-Systems-FSC556-Tactical-Compensator-p/pws%20fsc556.htm).

I have to say that, just like the BCM MK12 Mod 3X I bought a couple of months ago, this upper and lower arrived quickly and were absolutely flawless!

Here is the wife's new carbine with Magpul Foliage Green furniture.

http://farm5.static.flickr.com/4119/4880929764_7c701111ae_b.jpg

http://farm5.static.flickr.com/4076/4880917059_3f7ed82e3b_b.jpg

http://farm5.static.flickr.com/4095/4880930456_0be87572ca_b.jpg

http://farm5.static.flickr.com/4140/4880929512_ec15651606_b.jpg

BCM 14.5" Mid Length with BCM 18" MK12 Mod 3X-Bravo

http://farm5.static.flickr.com/4142/4880321333_ff829da6e1_b.jpg

I had a chance to race to the range is fire only 10 rounds through this today and it is absolutely amazing how this carbine runs, it is nothing like a 14.5" carbine, and even softer and smoother than my 16" mid-length. It shoulders, balances and moves extremely well. My wife hasn't had a chance to shoot it yet, but she loves the weight, right on 7lbs, and balance now and is going to be very happy with the way it shoots.

This could be my new favourite AR15. I thought that the 16" mid length gas system was the sweet spot, but the guys at Bravo Company have caused me to re-think it.

Here is the new 14.5" middy below my 16" middy both have 12" Daniel Defense Lite rails

http://farm5.static.flickr.com/4136/4881558010_8b753f72b1_b.jpg

I think I see another 14.5" mid length in my family's future.

Cameron

clasky

08-10-10, 19:51

http://i53.photobucket.com/albums/g64/clasky/EE/M845%20Mk4/M845_Mk4_5.jpg

Cameron

08-10-10, 20:06

BCM 14.5" Mid Length
http://farm5.static.flickr.com/4099/4880928554_fccc32f9e9_b.jpg

BCM 18" Mk12 Mod 3X-Bravo
http://farm5.static.flickr.com/4029/4669595880_f7e0ff422a_b.jpg

TOMTOM

08-10-10, 21:37

14.5" LMT

http://i737.photobucket.com/albums/xx14/TD236/4.jpg

Harrier

08-10-10, 21:43

Here's my latest...I just couldn't go for long without a short AR15 after selling my LMT earlier this year. I like my shorties as light and simple as possible...I was originally going to go irons only but thought I'd give the Aimpoint a try -- it's my first. The DD mount is very light (since it offers a 1/3 co-witness there's no need for a QR mount) and with the sight mounted "mid-way" along the rifle it doesn't affect the balance.

Upper: Canadian-made 10.3" N8 Upper with Magpul MOE handguards, Aimpoint H1 in Daniel Defence Mount (and sometimes a Magpul AFG)

Lower: Armalite lower with Stag parts kit and LMT receiver extension, Magpul MOE grip, trigger guard and CTR stock

http://i16.photobucket.com/albums/b17/Master-G/P1030712.jpg

http://i16.photobucket.com/albums/b17/Master-G/P1030711.jpg

Here is is with the AFG...I must admit I haven't gotten used to the feel of it. It's almost makes the rifle feel to "bulky"...like the FS2000 I used to own. I haven't tried it at the range yet -- I'll give it a try first before passing final judgement.

http://i16.photobucket.com/albums/b17/Master-G/P1030678.jpg

http://i16.photobucket.com/albums/b17/Master-G/P1030675.jpg

MookNW

08-10-10, 21:56

That's a sweet lil biscuit Harrier.
pic thread
http://a.imageshack.us/img375/6673/gunjuly075.jpg (http://img375.imageshack.us/i/gunjuly075.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

bkb0000

08-10-10, 22:40

That's a sweet lil biscuit Harrier.
pic thread
http://a.imageshack.us/img375/6673/gunjuly075.jpg (http://img375.imageshack.us/i/gunjuly075.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

dude.. where's your trig pin?

ALCOAR

08-10-10, 23:44

Thanks dude. I agree, they're pretty badass pics. Just wanna emphasize again though that they were NOT taken or edited by myself in any way. I don't want to take anything away from the photographer who took the pics. I'm just posting them for him.

Here's another pic of me, taken just before I pulled the trigger in the one above
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-14.jpg

Here's a direct view through the PVS-22, looking downrange at the steel silhouette target that's being lit up with an IR aiming laser. I can't say enough just how badass this thing was, and how awesome it is that TNVC actually let us borrow it! Looking through a Night Force scope with mil-dot reticle that one shooter had mounted on a really sweet Mk12 Mod 0, with the PVS-22 sitting in front of it, was one of the coolest things I've ever seen!
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-18.jpg

Shooter is engaging targets with full-auto .22 caliber AR (same one from earlier pic), illuminating target with his PEQ-2
http://i685.photobucket.com/albums/vv219/RetreatHell/NVG%20Shoot/nightshoot-13.jpg

WTF....its amazing to think all that badass, and top tier gear and weapons were all together for what must have been one helluva epic range session. You know how to rock N roll brother...I only wish I could tag along just once on one of those occasions like the night when all the great shots were taken. That type of gear belongs in a Maxim or Soldier of Fortune mag:)

The photographer has mad skills and clearly has quite the depth of knowledge to capture those images...pass on my dat if you remember...dudeman deserves it.

MookNW

08-11-10, 00:04

dude.. where's your trig pin?
Got me.:agree:

MookNW

08-11-10, 00:05

dude.. where's your trig pin?
takin a walk

TRUST8383

08-11-10, 01:58

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%207-10-10%20FREE%20VEST/b6a9306f.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%207-10-10%20FREE%20VEST/1a3b89bc.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%207-10-10%20FREE%20VEST/8680a110.jpg

RetreatHell

08-11-10, 02:05

Hey, nice car! I've got the exact same one. Best car I've ever owned!:D

Oh, and nice ARs, too;) Is that scope a Nightforce 2.5-10X24 NXS? If so, I've got one of those, too!:p Either way, I really like the setup on that one.

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%207-10-10%20FREE%20VEST/1a3b89bc.jpg

adh

08-11-10, 08:36

http://tiny.cc/xwelc
http://tiny.cc/62pz0
Almost done with this one. Just a few more things I need to buy.

Looks pretty good....and you do need to get your rear MBUS......that Insight laser must have cost as much as the rest of the carbine.

Titleist

08-11-10, 09:10

Would be if the PEQ were real ;)

clasky

08-11-10, 09:20

Would be if the PEQ were real ;)

c'mon title, half the battle is looking cool!

http://i53.photobucket.com/albums/g64/clasky/TNVCsl_0595.jpg

Titleist

08-11-10, 09:36

c'mon title, half the battle is looking cool!

Why do you think I ride a motorcycle, you just look cool!

Ugh, you're making me want to make an SPR, Clasky.

newyork

08-11-10, 10:00

BCM 14.5" Mid Length
http://farm5.static.flickr.com/4099/4880928554_fccc32f9e9_b.jpg

BCM 18" Mk12 Mod 3X-Bravo
http://farm5.static.flickr.com/4029/4669595880_f7e0ff422a_b.jpg

That 14.5" mid is my dream rifle. Wish I had a card that wasn't maxed out.:mad::mad:

Mega

08-11-10, 10:04

Love the Foliage Cameron. :cool:

clasky

08-11-10, 10:24

Why do you think I ride a motorcycle, you just look cool!

Ugh, you're making me want to make an SPR, Clasky.

Well, if you do, I suggest going with BCM. The Mk12 Mod1 at the top of this page is mine (the Mod0 upper is Vic's). BCM built my entire Mod1 and it is a tack driver! Quality is typical BCM: Excellent, and attention to detail is top notch. they even pin the gas block (something not done on military Mod1's). I love this gun.

Cincinnatus

08-11-10, 12:22

The_War_Wagon

08-11-10, 14:51

I bought the complete BCM middy upper off mark5pt56 a few mos. back, as I had a nice new Aero-Precision lower with NOTHING to stick on it, and it ran great as a combo at the range back over the 4th of July. Like most of us though, I JUST couldn't leave well enough alone. :p

I thought I'd pick up one of Grant's 'scratch 'n' dent' BCM specials, as for $250 (I added the MOE grip for another $19), I figured you COULDN'T go wrong!

http://i212.photobucket.com/albums/cc305/The_War_Wagon/New%20build/lower_scratch1.jpg

http://i212.photobucket.com/albums/cc305/The_War_Wagon/New%20build/lower_scratch.jpg

As you can see, the scratches weren't THAT bad, and the dent (not photographed) was a minor gouge mark on the FRONT of the magwell, perhaps a couple of mm x couple of mm's.

I had a spare MOE stock gathering dust - I slapped 'em all together, and VOILA! A complete BCM rifle!

http://i212.photobucket.com/albums/cc305/The_War_Wagon/New%20build/BCM_rifle1.jpg

http://i212.photobucket.com/albums/cc305/The_War_Wagon/New%20build/BCM_rifle.jpg

And this was SUPPOSED to be a beater/plinker project! :D Back to the drawing board!

OsoGrande

08-11-10, 15:06

What ammo was being used? Frangible? Tracer?

I am the photographer of the photos that RetreatHell posted the other day. Thank you for compliments about them! We all had a heck of a great time that night to say the least!!!

The ammo that was being used was stricktly FMJ shooting steel targets. The one with all the sparks was a long exposure that shows at least 3 or more hits hitting the target during that time.

One of the cameras has been converted to shoot in the IR spectrum only. That's how I was able to capture the IR laser illuminators as well as I did.

TRUST8383

08-11-10, 15:46

Hey, nice car! I've got the exact same one. Best car I've ever owned!:D

Oh, and nice ARs, too;) Is that scope a Nightforce 2.5-10X24 NXS? If so, I've got one of those, too!:p Either way, I really like the setup on that one.

Thanks! It seems great minds think alike haha.

Picture thread:

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%207-10-10%20FREE%20VEST/a3c761d8.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%207-10-10%20FREE%20VEST/c7cc601e.jpg

Magpuller

08-11-10, 15:52

Looks pretty good....and you do need to get your rear MBUS......that Insight laser must have cost as much as the rest of the carbine.

I Made the PEQ with IR/VIS laser and IR illuminator. The VIS and IR are 5mW and 35. The top selector works fire pad works, easy to zero. I have securely positioned everything inside and insulated it to protect from heat and recoil. The mount is full metal. I have made 4 of these trying to get it just right. I have shaved down my front mbus a bit so the VIS laser is not obstructed. It's a lot of work and redoing. I have made 2 of these like I have now. I have 750 rds on this with no problems including no zero issues. I enjoy having it on my gun it's serves me well. I don't see a reason to get rid of it unless it fails me. I don't have a reason to spend 1-2 grand on a insight peq. I don't even hav my own night vision. I borrow my uncles pvs gen 2 when I can. I'm not mr.money bags right now. I bought the m&p and everything on it with no job. I'm only 20 yrs old. I shoot and train almost everyday. I've got over 10,750 rds down range with my m&p. Ive only had it since march. I love the gun. Never have had any issues. This gun will be sold pretty soon for a knights rifle.

Sierrahotel83

08-11-10, 16:04

I Made the PEQ with IR/VIS laser and IR illuminator. The VIS and IR are 5mW and 35. The top selector works fire pad works, easy to zero. I have securely positioned everything inside and insulated it to protect from heat and recoil. The mount is full metal. I have made 4 of these trying to get it just right. I have shaved down my front mbus a bit so the VIS laser is not obstructed. It's a lot of work and redoing. I have made 2 of these like I have now. I have 750 rds on this with no problems including no zero issues. I enjoy having it on my gun it's serves me well. I don't see a reason to get rid of it unless it fails me. I don't have a reason to spend 1-2 grand on a insight peq. I don't even hav my own night vision. I borrow my uncles pvs gen 2 when I can. I'm not mr.money bags right now. I bought the m&p and everything on it with no job. I'm only 20 yrs old. I shoot and train almost everyday. I've got over 10,750 rds down range with my m&p. Ive only had it since march. I love the gun. Never have had any issues. This gun will be sold pretty soon for a knights rifle.

Damn Man I gotta ask how you have gotten that much ammo thru a rifle if you do not have a job... I am lucky to have gotten 1000 thru this year mine this year and I have a job... Looks good tho.

Col_Crocs

08-11-10, 18:56

Thanks! It seems great minds think alike haha.

Picture thread:

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%207-10-10%20FREE%20VEST/a3c761d8.jpg

What rail is that?

Sierrahotel83

08-11-10, 20:32

It looks like the KAC Urx

ROGOPGEAR

08-11-10, 20:44

Super55

08-11-10, 22:21

Hope the pictures aren't huge. Don't have the ability to change the size.

Here is my first build and my first post on this site. Be gentle

Bushmaster Lower
POS Steel Magazine
Stag Arms Left-handed M4 upper
Spike's Tactical 10 inch BAR Rail
GG&G Reflex Riser Rail
Trijicon RX06
Ergo Pop Bottle VFG
VTAC Light mount
Surefire G2 Nitrolon Light

Haven't had a chance to shoot her yet but looking forward to it!

The_War_Wagon

08-11-10, 22:57

nice build. your red dot looks a little low for the fixed irons though, can you even see the red dot?

Yep - QRP mount, and perfect co-witness. I HATE lower-third, as my mind will NOT process such a picture, and I cannot hit the target. Would love to find a cantilever that offers perfect co-witness, but have yet to hear of one.

Shot that configuration over the 4th of July, and she dialed in right away. :D

BigHate

08-12-10, 00:51

I Made the PEQ with IR/VIS laser and IR illuminator. The VIS and IR are 5mW and 35. The top selector works fire pad works, easy to zero. I have securely positioned everything inside and insulated it to protect from heat and recoil. The mount is full metal. I have made 4 of these trying to get it just right. I have shaved down my front mbus a bit so the VIS laser is not obstructed. It's a lot of work and redoing. I have made 2 of these like I have now. I have 750 rds on this with no problems including no zero issues. I enjoy having it on my gun it's serves me well. I don't see a reason to get rid of it unless it fails me. I don't have a reason to spend 1-2 grand on a insight peq. I don't even hav my own night vision. I borrow my uncles pvs gen 2 when I can. I'm not mr.money bags right now. I bought the m&p and everything on it with no job. I'm only 20 yrs old. I shoot and train almost everyday. I've got over 10,750 rds down range with my m&p. Ive only had it since march. I love the gun. Never have had any issues. This gun will be sold pretty soon for a knights rifle.

Do you have a description of the "peq" mods? What did you start with? Rifle looks great.

rapomstage3

08-12-10, 10:00

http://i946.photobucket.com/albums/ad301/rapomstage3/SDC10284.jpg
http://i946.photobucket.com/albums/ad301/rapomstage3/SDC10286.jpg
http://i946.photobucket.com/albums/ad301/rapomstage3/SDC10285.jpg
http://i946.photobucket.com/albums/ad301/rapomstage3/SDC10289.jpg
http://i946.photobucket.com/albums/ad301/rapomstage3/SDC10290.jpg

Stickman

08-12-10, 14:32

http://stickman.rainierarms.com/galleries/Magpul%20V/IMG_1087-1024-Stick.jpg

TOMTOM

08-12-10, 15:41

Sucks to have to follow Stickman...

http://i737.photobucket.com/albums/xx14/TD236/8-112-1.jpg

Bowser

08-12-10, 15:56

Messing around with a camera and a sunny day.

SA 1911 Loaded USA made frame
Surefire LX2 Lumamax
LMT Sopmod stock on an incomplete rifle

http://i906.photobucket.com/albums/ac269/ramen01/ramen_logos.jpg

number1olddog

08-13-10, 08:22

http://i1018.photobucket.com/albums/af302/J-Markert/DSC02407.jpg

Fearless_One

08-13-10, 18:32

http://farm5.static.flickr.com/4134/4889537116_4d837abd39.jpg
Rock Rivers with a standard LE stock Comp M2 at the top can't dish out the bucks to get a newer model and it still works for me, FFG4 on the rails swapping that out for an AFG soon

Fire

08-13-10, 21:25

FDE MVG!!!

http://i689.photobucket.com/albums/vv254/AllPackedUp/Images/SW-MP15-MOE-a.jpg

http://i689.photobucket.com/albums/vv254/AllPackedUp/Images/SW-MP15-MOE.jpg

Texsun

08-13-10, 21:52

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs461.ash1/25344_120810441262360_100000002147689_316216_3180805_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs544.ash1/31826_127763950567009_100000002147689_352759_4130632_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs234.snc4/39015_151643638179040_100000002147689_489174_3824154_n.jpg

stifled

08-13-10, 22:51

Installed a BAD ASS ambidextrous safety today. Landed on this configuration, at least for now.

http://i36.tinypic.com/2j122ib.jpg

http://i33.tinypic.com/14sh6wx.jpg

armakraut

08-13-10, 22:59

http://i33.tinypic.com/2u8b2fo.jpg
http://i33.tinypic.com/3007jur.jpg
http://i34.tinypic.com/2wqalur.jpg

LaVista

08-14-10, 00:28

http://a.imageshack.us/img227/4781/img0377i.jpg (http://img227.imageshack.us/i/img0377i.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

Noveske Afghan upper with LaRue 11.0 handguard, factory colt lower.

Stickman

08-14-10, 00:34

http://stickman.rainierarms.com/galleries/Gear%20Sector/868W0401-1024-bw-Stick.jpg

ALCOAR

08-14-10, 01:41

http://stickman.rainierarms.com/galleries/Gear%20Sector/868W0401-1024-bw-Stick.jpg

10/10....every now and again you bust one out that just makes me think of a fine piece of artwork way before I think anything firearm or gear related and those are the ones that I appreciate from you the most after all the wonderful and beautiful pics I stared at for the past several yrs. These recent effects pics are a whole different animal and hopefully folks interpret them as such and not only see the talent and high quality in them but the overall artistic quality to them that I find to be highly prevalent in them.

Disclaimer: I am a big fan of anything art:)

ETA: This shot makes for an incredible desktop background.

ALCOAR

08-14-10, 01:46

http://i33.tinypic.com/2u8b2fo.jpg
http://i33.tinypic.com/3007jur.jpg
http://i34.tinypic.com/2wqalur.jpg

That is the second one of those Trijicon RMR's mounted with the ADM mount Ive seen now and it looks great, how do you like it and do you have a T-1 to compare with it?

armakraut

08-14-10, 02:15

I am one old CompC3 sale away from getting my own Aimpoint micro, but I've seen/used them.

RMR's are a lot brighter and less finicky in the brightness department than the previous reflex sights. Washout has been reduced significantly. There is a slight distortion due to the curvature of the glass, makes it sort of look 1.1x in magnification. It is tinted like the other reflex sights on the market. You're never going to get a lower 1/3 cowitness with the RMR, horizontally the FOV is comparable to a micro, but the vertical FOV is slightly smaller. The ADM mount is absolute cowitness and under no circumstances is it plausible to run a rear BUIS in the up position. Like the micro it's better to run it a little further back if the small FOV bugs you (it does bug me, got used to my 1-4x and aimpoint 30mm).

Weighs less dry than a micro, if you could call 1.8 oz an gigantic weight savings (1.2 oz vs 3 oz). I was thinking of selling the RMR for a while, but for what it is and the price point, it's very good. Just has some limitations that aimpoints will never have, and some benefits aimpoints won't have either.

It's the Romanian AK of illuminated optics. Doesn't cost much, doesn't do much, and when it does, it's with a 7 MOA spread at 100m.

That is the second one of those Trijicon RMR's mounted with the ADM mount Ive seen now and it looks great, how do you like it and do you have a T-1 to compare with it?

kratosx9

08-14-10, 05:21

http://i27.tinypic.com/2hzluh4.jpg:)

Hey trident what optics is that on your AR?

sadmin

08-14-10, 07:51

I think thats the Nightforce NXS 2.5-10 x 32.

http://i7.photobucket.com/albums/y283/r3h4b/CIMG0215.jpg

newyork

08-14-10, 10:19

This is my friend shooting my N4 basic. His 1st time firing a rifle...ever.
http://i605.photobucket.com/albums/tt134/rslamiroult/DSCF1338.jpg
http://i605.photobucket.com/albums/tt134/rslamiroult/DSCF1335.jpg

This is me firing my N4 light..
http://i605.photobucket.com/albums/tt134/rslamiroult/DSCF1344.jpg
http://i605.photobucket.com/albums/tt134/rslamiroult/DSCF1348.jpg
http://i605.photobucket.com/albums/tt134/rslamiroult/DSCF1352.jpg

docsherm

08-14-10, 12:47

bbaxter92

08-14-10, 13:29

Hi There.

New to this forum and was referred by a buddy.

Here's a pic of my Bushmaster XM-15. Also I have a Taurus PT-92 and Taurus PT-945.

http://www.dannyandcarol.com/guns/guns.jpg

texas12

08-14-10, 13:49

http://img833.imageshack.us/img833/1115/dscn1264.jpg

Belmont31R

08-14-10, 13:53

Some updates to my Mk12 build....

- Smith Vortex Mk12/Ops Inc can mount flash hider replaced the brake. With how heavy the gun is I didn't really notice all that much of a difference. It still has barrely any recoil, and you can still spot your own shots.

- UBR replaced the Colt 4 pos tube and SOPMOD stock.

This thing is ridiciously easy to shoot. You can ping a LaRue steel target at 250 yards pretty much as fast as you can pull the trigger, and it will shoot 10 shot MOA groups with 77 grain SMK's pretty easily.

http://i274.photobucket.com/albums/jj245/BM31R/38cf85e5.jpg

Titleist

08-14-10, 14:22

Goodbye Stealth upper, hello Troy VTAC!

http://farm5.static.flickr.com/4094/4891149225_99fb6ed2dd_b.jpg

Belmont31R

08-14-10, 15:54

http://i274.photobucket.com/albums/jj245/BM31R/63f71010.jpg

http://i274.photobucket.com/albums/jj245/BM31R/0687250e.jpg

ROGOPGEAR

08-14-10, 17:12

http://i274.photobucket.com/albums/jj245/BM31R/63f71010.jpg

http://i274.photobucket.com/albums/jj245/BM31R/0687250e.jpg

that's hawt. :smile:

Cameron

08-14-10, 19:37

that's hawt. :smile:

I suppose we just have different standards....

http://farm5.static.flickr.com/4099/4892132174_338d9b5acb_b.jpg

http://farm5.static.flickr.com/4115/4891533427_bf7a422147_b.jpg

ALCOAR

08-14-10, 19:38

Hey trident what optics is that on your AR?

Its a NF nxs compact 2.5-10x24 w. mil dot mounted in an ADM scout x mount and the secondary is a aimpoint t-1 mounted using a larue LT-724:)

Pic
http://i34.tinypic.com/21kcmma.jpg

Great pics NewYork and I commend you for introducing another person to the fantastic world of firearms and that is a number of times I recall you doing that exact thing. I believe taking folks shooting for the first time in a safe, and fun enviroment is what will ensure the second will stay on the books more than anything else.

Cameron will never even get to shoot that nice looking new 14.5" bcm middie...and that is my case for playing the field:)

Titleist

08-14-10, 19:41

Cameron, do you need me to send you guys my SR-25 so we can officially cross the streams?

Cameron

08-14-10, 20:06

Cameron, do you need me to send you guys my SR-25 so we can officially cross the streams?

Yes. PM for my shipping address.

Cam

ROGOPGEAR

08-14-10, 20:19

I suppose we just have different standards....

http://farm5.static.flickr.com/4099/4892132174_338d9b5acb_b.jpg

http://farm5.static.flickr.com/4115/4891533427_bf7a422147_b.jpg

no, pretty similar...:D

PS. please disregard trigger finger, this was addressed.

http://i415.photobucket.com/albums/pp238/ravenwulfe101/Photo_091808_005.jpg?t=1281835041

Cameron

08-14-10, 20:32

Pictures lie, videos don't.

:D

http://i886.photobucket.com/albums/ac61/gstuffnow/th_BCMmiddy.jpg (http://s886.photobucket.com/albums/ac61/gstuffnow/?action=view&current=BCMmiddy.mp4)

Belmont31R

08-14-10, 20:33

;)

http://i274.photobucket.com/albums/jj245/BM31R/MEAGAN2.jpg

http://i274.photobucket.com/albums/jj245/BM31R/MEAGAN.jpg

http://i274.photobucket.com/albums/jj245/BM31R/l_ff44a7bea67c2fa7bdb9d7daf9ad51-1.jpg

http://i274.photobucket.com/albums/jj245/BM31R/DSC_0165.jpg

ROGOPGEAR

08-14-10, 20:58

:D

http://i886.photobucket.com/albums/ac61/gstuffnow/th_BCMmiddy.jpg (http://s886.photobucket.com/albums/ac61/gstuffnow/?action=view&current=BCMmiddy.mp4)

darn it, I don't have time to do this right now, haha. here's one of my sister with my rifle until I can find my vids of my wife with it.

http://www.youtube.com/user/greeneyedgrl4#p/a

whitey615

08-14-10, 21:24

My Sig and her friend...

http://i777.photobucket.com/albums/yy60/whitey615/DSC08059.jpg

ALCOAR

08-14-10, 21:59

darn it, I don't have time to do this right now, haha. here's one of my sister with my rifle until I can find my vids of my wife with it.

http://www.youtube.com/user/greeneyedgrl4#p/a

She is a great lil shooter, guess you take the credit for that;)
edited for answering my own question by watching the video again....did not know if it was a conversion or a dedicated .22 upper. At any rate it looks like a great training aide and a blast to shoot.

cheapbastard

08-14-10, 22:36

http://img638.imageshack.us/i/gear1w.jpg/

http://img841.imageshack.us/i/ar1x.jpg/

http://img638.imageshack.us/i/gear1w.jpg/

Stickman

08-15-10, 01:52

Just keeping the theme going....

Click link for full size image (http://farm5.static.flickr.com/4059/4343275039_bbf19338d6_o.jpg)

http://farm5.static.flickr.com/4059/4343275039_93d1b85272.jpg

Jeffu

08-15-10, 01:56

http://i567.photobucket.com/albums/ss111/denimtalk/KyuriSample.jpg

Jeffu

08-15-10, 03:44

delete

matemike

08-15-10, 04:25

http://i436.photobucket.com/albums/qq86/matemike05/IMG_0312.jpg

S&W MP 15

ACOG TA31H
Timney 3lb trigger
Hugue Grip
Magpul PMags
UTG Quad rail
broomstick foregrip handle

Rusty_Shackleford

08-15-10, 08:22

http://i436.photobucket.com/albums/qq86/matemike05/IMG_0312.jpg

S&W MP 15

ACOG TA31H
Timney 3lb trigger
Hugue Grip
Magpul PMags
UTG Quad rail
broomstick foregrip handle
Now I know I've see this rifle before, I never forget an Ar.......;)

SKULL1

08-15-10, 10:31

http://farm5.static.flickr.com/4123/4893641287_c53a2deaf6_b.jpg

decodeddiesel

08-15-10, 10:46

Cool Theme

http://i19.photobucket.com/albums/b200/decodeddiesel/10182009015.jpg

macnamara

08-15-10, 10:53

one for the theme...

http://hphotos-snc3.fbcdn.net/hs119.snc3/16664_315517755541_533175541_9431365_7177165_n.jpg

d90king

08-15-10, 11:23

http://farm5.static.flickr.com/4123/4893641287_c53a2deaf6_b.jpg

Very nice! Great minds think alike...;)

Pic thread:
http://i156.photobucket.com/albums/t5/d90king/DSCN0101.jpg

Rated21R

08-15-10, 11:51

d90king

08-15-10, 11:56

Does the VTAC come with the wrench?

Pic thread (I can finally contribute :D)

http://img718.imageshack.us/img718/2600/dsc0060cw.jpg

Prior to some cosmetic changes and the addition of a Gear Sector Scout mount.

Mine did not but it was a factory build from Noveske so I don't know if that matters or not...

ROGOPGEAR

08-15-10, 12:13

She is a great lil shooter, guess you take the credit for that;)
edited for answering my own question by watching the video again....did not know if it was a conversion or a dedicated .22 upper. At any rate it looks like a great training aide and a blast to shoot.

it's a drop in CMMG .22 conversion, just change out the BCG. it's nice because I get to work with my same rifle with only changing the mags and BCG. it's also nice for new shooters to get the form and basics down before surprising them with the recoil.

Cameron

08-15-10, 18:04

http://farm5.static.flickr.com/4123/4893641287_c53a2deaf6_b.jpg

Good looking gear and photo!

Cam

Cameron

08-15-10, 18:05

I told her I had too, because of the theme....

http://farm5.static.flickr.com/4101/4891984077_b50d73cb84_b.jpg

My wife's new carry piece, a Colt New Agent .45

Note the brass in the air...

http://farm5.static.flickr.com/4123/4892538788_709655e6e6_b.jpg

http://farm5.static.flickr.com/4116/4895293537_dd6d06bb7c_b.jpg

halo2304

08-15-10, 18:10

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs234.snc4/39015_151643638179040_100000002147689_489174_3824154_n.jpg

That's an unusual vacuum-track pattern... :D :jester:

memberonly

08-15-10, 18:12

crappy ammo....

http://img251.imageshack.us/img251/9780/89715233.jpg

Learner315

08-15-10, 19:08

Ok ... my Wife's first shot with my AR...:happy:

http://i703.photobucket.com/albums/ww39/learner315/NVE00001.png

ZombieKiller

08-15-10, 20:06

Theme pic:

http://img44.imageshack.us/img44/6199/48195946.jpg

mvician

08-15-10, 21:09

http://i48.photobucket.com/albums/f240/mvician/ChatterBox/CBSOCOM001.jpg

http://i48.photobucket.com/albums/f240/mvician/ChatterBox/CBSOCOM008.jpg

SKULL1

08-15-10, 22:57

Very nice! Great minds think alike...;)

neat..:neo:

with my USMC buddy..:happy:

http://farm5.static.flickr.com/4099/4858734613_de6c90a906_b.jpg

ALCOAR

08-15-10, 23:52

http://i48.photobucket.com/albums/f240/mvician/ChatterBox/CBSOCOM001.jpg

http://i48.photobucket.com/albums/f240/mvician/ChatterBox/CBSOCOM008.jpg

Nice touch on the rollmark there w. the red fill....what did you use?

http://i37.tinypic.com/2wn5zd5.jpg

Mike123

08-16-10, 00:16

http://i816.photobucket.com/albums/zz88/egsir95/IMG_0542.jpg

toekneeg

08-16-10, 07:55

Keeping with the theme, my GF shooting the AR for the first time.

http://www.youtube.com/watch?v=26aWfDwVSs8

Stickman

08-16-10, 10:24

crappy ammo....

http://img251.imageshack.us/img251/9780/89715233.jpg

.... but a good picture.

rapomstage3

08-16-10, 17:27

New Middy Barrel with modded troy claymore
http://i946.photobucket.com/albums/ad301/rapomstage3/SDC10267.jpg
New chrome bolt and spikes trigger guard
http://i946.photobucket.com/albums/ad301/rapomstage3/SDC10298.jpg
I didnt like the teeth on the troy so my buddy milled them off.looks balls i think.
http://i946.photobucket.com/albums/ad301/rapomstage3/SDC10296.jpg
http://i946.photobucket.com/albums/ad301/rapomstage3/SDC10297.jpg

memberonly

08-16-10, 18:50

.... but a good picture.

Thanks. It's quite special to receive a compliment from you.

mrbieler

08-16-10, 19:29

http://i87.photobucket.com/albums/k158/mrbieler/BCMmiddyM4s_1.jpg

http://i87.photobucket.com/albums/k158/mrbieler/BCMmiddyM4s_3.jpg

http://i87.photobucket.com/albums/k158/mrbieler/BCMcarbines081610.jpg

Firegardn77

08-17-10, 01:45

Now that I have it the way I want it, here is some gun porn :)

http://i293.photobucket.com/albums/mm49/firegardn77/Rifle1.jpg

http://i293.photobucket.com/albums/mm49/firegardn77/Rifle2.jpg

http://i293.photobucket.com/albums/mm49/firegardn77/Rifle3.jpg

Rock River Arms LAR-15 w/ mid-length gas system
YHM Phantom
JP VTAC mid-length tube
VTAC / Surefire light w/VTAC light mount
SOG vertical grip
EOTech 511
EOTech G23 FTS 3X magnifier
Magpul PMAG full of Federal Tactical 55gr bonded
VTAC MKII wide padded sling
YHM flip up front and rear buis
VTAC LUSA sling mount
VLTOR Emod
Half a can of Krylon OD green camo paint

ghostman1960

08-17-10, 06:24

Crappy cell phone pic. BCM 14.5" mid length. I'm still saving for the H1.

http://i596.photobucket.com/albums/tt45/ghostman1960/1281988264.jpg

ALCOAR

08-17-10, 07:43

Crappy cell phone pic. BCM 14.5" mid length. I'm still saving for the H1.

http://i596.photobucket.com/albums/tt45/ghostman1960/1281988264.jpg

You sir made my morning...Awesome feline....Awesome firearm:)

My new pal is always trashing my photos...as you can see below:D
http://i33.tinypic.com/3495r7r.jpg

toekneeg

08-17-10, 10:01

Quick cell phone pics... gotta get a picture of the whole family soon.

My 14.5" Midlength

http://farm5.static.flickr.com/4121/4900827119_7261ba5456_b.jpg

http://farm5.static.flickr.com/4120/4900826465_e417e5542a_b.jpg

tiger seven

08-17-10, 10:15

New ACOG TA33G-H on my Noveske Recce.

http://i3.photobucket.com/albums/y82/zulu15/Noveske_ACOG.jpg
http://i3.photobucket.com/albums/y82/zulu15/Noveske_ACOG_left.jpg

Derek

RetreatHell

08-17-10, 11:17

Some updates to my Mk12 build....
http://i274.photobucket.com/albums/jj245/BM31R/38cf85e5.jpg

Awesome, man! The UBR looks great on there, as does that badass S&B glass you got sitting on top of her;) Not happy with your decision to remove the brake, but I suppose I can get over it... eventually:mad:

Once it cools down a bit in a couple months, we need to link up again and do some more shooting! Either you can come back down here, or I can make the drive up to you this time to do some long range shooting at your new range.

RetreatHell

08-17-10, 11:21

Goodbye Stealth upper, hello Troy VTAC!

http://farm5.static.flickr.com/4094/4891149225_99fb6ed2dd_b.jpg

I haven't looked at the pic thread in about 5 or so days, but your new BCM 12.5" turned out great, bro! How do you like the VTAC handguard? Getting used to it?

Let me know how it shoots, man!

ETA: Top of a new page, might as well throw a couple of my pics in here, too!:D

http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20Kino%20SBR/DSCF1729.jpg

http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20Kino%20SBR/DSCF1715.jpg

Lnxgeek

08-17-10, 14:34

Here is my LMT now:

http://i979.photobucket.com/albums/ae277/damaoj/M4C%20forum/HPIM1364.jpg

http://i979.photobucket.com/albums/ae277/damaoj/M4C%20forum/HPIM1365.jpg

here is the "before" shot:

http://i979.photobucket.com/albums/ae277/damaoj/M4C%20forum/foliagegreenthread.jpg

Titleist

08-17-10, 15:48

I haven't looked at the pic thread in about 5 or so days, but your new BCM 12.5" turned out great, bro! How do you like the VTAC handguard? Getting used to it?

Let me know how it shoots, man!

I love it. It's totally simple, in fact I ended up ditching the long bottom rail in favor of just the tube. I could probably lose the left side short rail as nothing is mounted there.

I've yet to shoot it. But it feels great, and with the AAC M4-2K it just looks really simple and effective. I need to ditch that coke-can sized M2 and get with a T-1

http://farm5.static.flickr.com/4079/4762202702_920bb8f7d8_b.jpg

PowersTx

08-17-10, 18:56

I purchased my first AR last week. I spent the weekend breaking it in. My first AR and I had a blast..love it. I am new to the website here and a few others for the AR, and I have gotten first class info everywhere.
I purchased a Stag Model 1 with Magpul MOE equipment installed by my dealer and sold as a package deal. It looks very well put together, both the OEM and the Magpul items.
Any ways, here are a few pictures, and I hope to stick around and share info here!
[IMG]http://i811.photobucket.com/albums/zz36/HoustonPowers/AR15/6d338e6f.jpg

http://i811.photobucket.com/albums/zz36/HoustonPowers/AR15/782b3628.jpg