AR Picture Thread [Archive] - Page 3

USMC03

03-10-08, 21:23

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20coyote/coyLMT1.jpg?t=1204759051

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20coyote/coyLMT2.jpg?t=1204759075

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20coyote/coyLMT4.jpg?t=1204759099

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20coyote/coyLMT5.jpg?t=1204759116

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20coyote/coyLMT3.jpg?t=1204759135

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20coyote/coyLMT6.jpg?t=1204759152

S/F,
Jeff

Bad_Karma

03-12-08, 02:27

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20coyote/coyLMT1.jpg?t=1204759051

S/F,
Jeff

Absolutely awesome carbine Jeff! I love simplicity. Is that the Surefire 556k flash hider?

Jay Cunningham

03-12-08, 10:29

http://img301.imageshack.us/img301/8287/middy001au4.jpg

markm

03-12-08, 11:24

Flip side of the Noveske N4.

That is a masterpiece. :)

USMC

03-12-08, 12:00

http://img.photobucket.com/albums/v602/USMC/AR15/Mega105SBR1.jpg

USMC03

03-12-08, 12:34

Is that the Surefire 556k flash hider?

Yes

S/F,
Jeff

Stickman

03-13-08, 02:17

That is a masterpiece. :)

I knew you would like that the older Colt stock, so I shot this one with you in mind as well.

http://stickman.rainierarms.com/galleries/Noveske/IMG_0711%201028%20Stick.jpg

markm

03-13-08, 08:22

I knew you would like that the older Colt stock, so I shot this one with you in mind as well.

All my beans have the old Colt 4 POS stock. I like the compactness of it. These pics look almost like you pulled the weapons out of my safe!

Paulinski

03-13-08, 08:24

http://img.photobucket.com/albums/v602/USMC/AR15/Mega105SBR1.jpg

Very Nice.

What brand of Barrel is that? 10.5" Noveske?

USMC

03-13-08, 08:49

Very Nice.

What brand of Barrel is that? 10.5" Noveske?

I wish it were a Noveske! I had an old 16 inch Stainless Oly M4 barrel not being used that I had cut down and bead blasted. The plan is to use a Noveske when I can find a used one at an affordable price.

http://img.photobucket.com/albums/v602/USMC/AR15/10.jpg

at4rxj

03-13-08, 10:28

5.56
http://i162.photobucket.com/albums/t250/at4rxj/3-9-08/DSC_0013.jpg

.50 Beowulf
http://i162.photobucket.com/albums/t250/at4rxj/3-9-08/DSC_0008.jpg

Not all mine... had a "get-together" at USMC's ranch :)
http://i162.photobucket.com/albums/t250/at4rxj/shoot/guns.jpg

klutched

03-13-08, 13:37

Here are my 2 AR's in their present states:
The registered/engraved SBR is my 10.3" CMMG/VLTOR/Adams Arms concoction.
It has a 10.3" 1/7 HBAR with an Adams Arms (http://www.adamsarms.net)
Short Stroke Piston Gas System, a POF Front Sight (Larue/Troy sight in the mail), Surefire Comp, MI Rail (my DD Omega 7.0 is on the way), CMMG M16 BCU, H-buffer, Surefire Scout, TD Vert Grip in FDE, Magpul FDE Ladder Rail Covers, DD Sling Loop, Mega Gator Lower w/ DPMS LPK and KNS Anti-Spin, Magpul MIAD in FDE, Magpul PreProd UBR in FDE, VLTOR MUR-1A Upper, LARUE BUIS, Larue Irondot.
http://i119.photobucket.com/albums/o135/jnortham/IMG_0346.jpg
It is a real tack-driver, dead accurate, and almost no recoil. Plus it is sexy as hell!
Close up of Gas Block:
http://i119.photobucket.com/albums/o135/jnortham/IMG_0334.jpg
Here she is with her big sis:
http://i119.photobucket.com/albums/o135/jnortham/IMG_0357.jpg
http://i119.photobucket.com/albums/o135/jnortham/IMG_0343.jpg
Big sister is a CMMG MedCon Stainless 16" Mid with a VLTOR FS, Troy MRF, Mega Gator Lower, Direct Impingement Gas System, VLTOR MUR-1A Upper, TD Grip in OD, TD Stubby Vert Grip in OD, Magpul OD Ladder Rail Covers, Magpul CTR-M on a BCUSA Buffer Tube, DPMS LPK, VLTOR Backplate/Sling Mount, Matech BUIS, Trijicon TA-01NSN with Killflash on a Larue DOSX4 mount, topped with a Streamlight TLR-1 on a GG&G offset with remote tape. Also sexy.....

docsherm

03-13-08, 14:22

Very nice. I have not heard of Adams Arms Retrofit Piston Driven Systems. Can you tell us some more about the system and how it is working for you?

klutched

03-13-08, 14:44

Adams Arms is in Palm Harbor/Dunedin FLA (Gulf Coast near Tampa), they are new, but their design is solid and functions FLAWLESSLY. I put 250 rnds through it at McKeller's Lodge on Ft. Bragg yesterday, and all I can say is DAMN! I can officially state that direct impingement is DEAD! After 250 rounds all I had to do is boresnake the barrel and wipe the comp down and bang you have a clean rifle. Running cleaner is only one of the benefits, talk about a reduction in recoil, no more "gas-in-the-eye" from gas bleed-off. All the gas is bled-off at the gasblock. Allows for a nice tight sight picture. The piston/Surefire Comp combo is the sh*t, I was double-tapping in solid 1" groups at 75" yds with my Larue IronDot. This little gun is the ultimate CQB gun now. I never have to worry about the dreaded failure to cycle common in SBR's.
The system from Adam's Arms is well worth the $499.00, it requires no permanent modification to the rifle and works out of the box with a whole slew of rail systems from MI to ARMS. Lifetime warranty, and Jason is always there to help. Jim, his PR guys is also fantastic. I have seen the LWRC, Bushmaster and HK-416 gas system, I can honestly say that Adams Arms is head and shoulders above them, especially LWRC, having to use their ugly, clumsy rail system would make me yack. Give them a call or go to www.adamsarms.net.

BTW my Gas Block is SN# GB-0001A, the very 1st production system, it also has my name laser engraved on the gas block. My block is also the master off the CNC machine, so technically my Gas block is worth $80,000+ :)

The weirdest part of this is that I grew up a mile from the main offices of Adams Arms and my little sister went to school at the same time as the owner. I live in Central NC, what is the odds that i would end up with a gas system from a company located in a tiny town like Palm Harbor FLA? Too ironic.

ETA: Pixxor thread:
http://i119.photobucket.com/albums/o135/jnortham/IMG_0373.jpg

docsherm

03-13-08, 20:39

thanks for the info. I called them today. Sounds like some good stuff. I am waiting to see if it will fit under a LaRue rail, they are going to try it out. PM sent

Globemaster

03-13-08, 22:35

http://i66.photobucket.com/albums/h261/globemaster_oly/DSCN6562.jpg

exitinyourhead

03-14-08, 23:09

gorgeous rifles everybody!

my humble RRA submission

http://img529.imageshack.us/img529/7596/gunsmm1.jpg (http://imageshack.us)

molsen

03-15-08, 09:58

gorgeous rifles everybody!

my humble RRA submission

http://img529.imageshack.us/img529/7596/gunsmm1.jpg (http://imageshack.us)

Nice, but your LaRue BUIS is on backwards.

klutched

03-15-08, 14:25

Nice, but your LaRue BUIS is on backwards.

It sure is......:D

exitinyourhead

03-15-08, 15:43

learn something every day! just put it on yesterday... would probably have made sighting it in a real chore. Thanks ya'll!

scottp999

03-15-08, 18:37

My new Noveske N4 Low Profile. Sorry about picture quality. Down to a cell phone camera.

http://img257.imageshack.us/img257/1350/03130816511yu4.jpg (http://imageshack.us)

SHIVAN

03-16-08, 17:34

http://i235.photobucket.com/albums/ee192/SHIVAN308/SSDC-SHIVANShortDotCarbine-1.jpg

Colt LE6920 factory lower
Colt Upper with Noveske 10.5" SS barrel
LaRue 9.0
Blue Force Gear (G&R Tactical) Vickers Sling (QD sewn-in)
Magpul MIAD Grip
LMT SOPMOD Stock
Magpul PMAG
KAC rail covers
KAC foregrip
Troy BUIS (F/R)
KAC sling stock mount
2006 AAC M4-2000 w/ Phantom type QD mount
Gen I Short Dot with locking turrets
LaRue SPR-EER mount
PRi Gasbuster charging handle
Daniel Defense receiver extension QD mounting plate

robbf213

03-16-08, 18:25

http://i73.photobucket.com/albums/i227/robbfurlow/Picture1307.jpg

http://i73.photobucket.com/albums/i227/robbfurlow/Pelican003.jpg

hower610

03-16-08, 21:26

http://i119.photobucket.com/albums/o135/jnortham/IMG_0334.jpg

More info on your muzzle break please

klutched

03-17-08, 10:44

MB556K Muzzle Brake/Adapter
Fits: M4, M16, HK416 w/ 14.5” or longer barrel, other rifles with ½-28 muzzle threads.

Mounts: FA556K, FA556-212 suppressors.

http://www.surefire.com/maxexp/main/co_disp/displ/carfnbr/466/sesent/00

palakaboy

03-17-08, 15:51

klutched

03-17-08, 18:05

My SBR?
Sure, here it is:
http://www.blackhawk.com/product1.asp?P=71CQS1&C=C1999

Dieter CQD Sling w/Sling cover

• Designed by Duane Dieter, exclusive trainer to the NSWC
SEAL Teams
• Constructed with 1.25” T-13 webbing - wider and softer than
standard webbing
• Easily adjustable for all operators
• Heavy-duty elastic assists with strikes and point shooting as
well as quick adjustment in difficult situations
• Metal snap hooks attach to most weapon systems, brackets
or attachment buckles

$51.99
Coyote Tan

klutched

03-17-08, 18:07

OH BTW, new optics on my SBR:
http://i119.photobucket.com/albums/o135/jnortham/IMG_0406.jpg

Trijicon TA33-8 with Amber Hash, Larue Mount on the way, as well as Larue/Troy FDE Front Sight.
Put an ARMS #40L BUIS on it too.

SuicideHz

03-17-08, 18:39

Hash? Is that a newer one? I saw that one with the amber chevron this weekend. Pretty damn nice. I would still prefer red though.

klutched

03-17-08, 19:12

It is chevron, I was too lazy to type.....:) The amber shows up great at night though.

palakaboy

03-18-08, 00:13

you've got too much money klutched...

too much money...share the wealth sometime will ya! :D :D

M76F

03-18-08, 17:43

Noveske N4 upper
Bushmaster lower
Meopta 1-4x in Larue SPR
Surefire M4FA

http://i25.tinypic.com/wk35ud.jpg

Still have a few things to add. Rail is en route. Then an LMT SOPMOD, Vickers sling, and H-buffer, and she'll be about done. I have a light already, but for now, no way to mount it.

H2O MAN

03-18-08, 20:58

After 8 years without an AR I decided I needed one so I recently went out a purchased a Colt :)

http://www.athenswater.com/images/6920-03.16.2008.jpg

Colt : LE 6920
LaRue Tactical : 7.0" Handguard LT15-7
Tango Down : VFG
Magpul : PMAG 30, MIAD full kit w/AA and Ladder Rail Protectors
LMT : SOPMOD Buttstock Assembly
EOTech : 552.A65/1
GG&G : MAD Sight
Badger Ordnance : Tactical Latch, Gen II
Surefire : Scout Light Kit M600 KIT01

klutched

03-18-08, 21:04

After 8 years without an AR I decided I needed one so I recently went out a purchased a Colt :)

http://www.athenswater.com/images/6920-03.16.2008.jpg

What model is this? It is really nice BTW.

Paulinski

03-18-08, 21:26

What model is this? It is really nice BTW.

Colt model 6920

rockm4

03-19-08, 23:38

PMAG Ranger Floor Plate? WTF? Can i have one?

(Kinda looks like a SpeedPlate from this angle though...)

Ranger floorplate ! heck i want to know where i can get one of those magpul lowers? way too cool! :D

R1pper

03-20-08, 19:18

http://i213.photobucket.com/albums/cc179/Wkunasek/Picture009.jpg

http://i213.photobucket.com/albums/cc179/Wkunasek/Picture008.jpg

http://i213.photobucket.com/albums/cc179/Wkunasek/Picture002.jpg

http://i213.photobucket.com/albums/cc179/Wkunasek/Picture005.jpg

pearson

03-20-08, 20:39

very nice i cant wait for my infidel lower to come in

I just picked up the benchmade infidel OTF knife but it is really not that great

Deadcenter45

03-20-08, 22:31

http://cobratek.csoft.net/img/ar/lmt_ar_01.jpg
:D sorry for the crappy cell phone camera pic

Stickman

03-20-08, 23:15

All my beans have the old Colt 4 POS stock. I like the compactness of it. These pics look almost like you pulled the weapons out of my safe!

We have similar taste in cans as well.

Jay Cunningham

03-20-08, 23:25

We have similar taste in cans as well.

http://photos21.flickr.com/29332061_4dc8725189.jpg

"He hates these cans!"

SuicideHz

03-21-08, 17:42

http://www2.zoto.com/suicidehz/img/1024x768/aabc9e624d77505a27c7401875669509.jpg

lindertw

03-21-08, 17:57

Noveske N4 basic
http://mysite.verizon.net/tlinderman/sitebuildercontent/sitebuilderpictures/21MAR08_noveske_4_bw.jpg

klutched

03-21-08, 19:42

Severian

03-21-08, 23:18

blank

R1pper

03-22-08, 03:21

Looks like a Eagle plate carrier (http://www.eagleindustries.com/prd_detail.asp?ProdID=344&CatID=78&SubCatID=16)

You are correct Sir. Eagle Plate carrier w/ cummerbund.

-DM-

gt5966b

03-22-08, 15:53

http://www2.zoto.com/suicidehz/img/1024x768/aabc9e624d77505a27c7401875669509.jpg

What kind of belt is that?

homage to the pic gods:

http://img221.imageshack.us/img221/3108/img1428qq4.jpg

http://img222.imageshack.us/img222/7223/img1437bo9.jpg

AR-15A3

03-23-08, 13:22

http://i6.photobucket.com/albums/y232/Alpha-Romeo3/Hunting%20Operator%2010X7/C6721OPERATOR_PADVCAS_L241_AAF-PBAF.jpg

http://i6.photobucket.com/albums/y232/Alpha-Romeo3/Hunting%20CAR%2010X7/LMT_troyBUIS_RH-L211-ASF-1.jpg

http://i6.photobucket.com/albums/y232/Alpha-Romeo3/Hunting%20Rifles%2010X7/ColtM16A2clone-RH_ASFCRP-LG.jpg

pearson

03-23-08, 15:34

:D how about this for goofy

http://www.zoto.com/pearson/img/45/793f957e6d294a6c6133b33a5c31b8b1.jpg

cody0341

03-24-08, 17:45

http://i254.photobucket.com/albums/hh95/cody0341/IMG_2627.jpg

mvician

03-24-08, 18:41

Colt 6920 16" M4 upper that I got from Thekatar :D
LMT standard M16 BCG
KAC 300m BUIS
KAC RAS II
Surefire M951 weaponlight upgraded with a CREE LED module
Trijicon ACOG TA31F

Stag lower
Stag LPK + KAC 2 stage trigger group
LMT SOPMOD
Magpul MIAD and PMag

http://i48.photobucket.com/albums/f240/mvician/AR/ACOGKACColt001.jpg

http://i48.photobucket.com/albums/f240/mvician/AR/ACOGKACColt002.jpg

http://i48.photobucket.com/albums/f240/mvician/AR/ACOGKACColt003.jpg

http://i48.photobucket.com/albums/f240/mvician/AR/ACOGKACColt008.jpg

SilentButDeadly

03-24-08, 19:19

Mk18 Mod 0
http://i93.photobucket.com/albums/l53/tgianotti/DSC00565.jpg
http://i93.photobucket.com/albums/l53/tgianotti/DSC00566.jpg
Mk12 Mod 0
http://i93.photobucket.com/albums/l53/tgianotti/DSC00567.jpg
http://i93.photobucket.com/albums/l53/tgianotti/DSC00568.jpg
Both.
http://i93.photobucket.com/albums/l53/tgianotti/DSC00464.jpg

mopar

03-24-08, 19:24

Here's my current setup.
https://www.m4carbine.net/attachment.php?attachmentid=756&d=1206404656
https://www.m4carbine.net/attachment.php?attachmentid=757&d=1206404684

SuicideHz

03-24-08, 20:03

AR15A3-

Someone snuck an AK mag in on ya, eh?

Nice one Silentbutdeadly! (both that is)

ARin

03-24-08, 22:14

AR15A3-

Someone snuck an AK mag in on ya, eh?

Nice one Silentbutdeadly! (both that is)

its not an AK mag.

Ridge_Runner_5

03-25-08, 11:58

My first build :)

http://i17.photobucket.com/albums/b100/89Sunbird/Dsc_0006.jpg
http://i17.photobucket.com/albums/b100/89Sunbird/1005854.jpg
http://i17.photobucket.com/albums/b100/89Sunbird/AR-15/100_5887.jpg

sbui

03-25-08, 21:40

http://i90.photobucket.com/albums/k244/shermanbui/IMG_5567.jpg

http://i90.photobucket.com/albums/k244/shermanbui/IMG_5570.jpg

Just got it sighted in last saturday.

http://i90.photobucket.com/albums/k244/shermanbui/IMG_5571.jpg

Colt HBAR

altav

03-25-08, 23:24

http://www.picrypt.com/users/altav/pistola/kac_47_1.jpg

KevinB

03-26-08, 02:50

Damn nice.

Stickman

03-26-08, 12:11

http://www.picrypt.com/users/altav/pistola/kac_47_1.jpg

Nice!

M76F

03-26-08, 13:41

Did SR-47 do the cut outs on the rail panels?

That's really cool.

Jay Cunningham

03-26-08, 13:43

saromans134

03-26-08, 17:39

POF complete rifle.:D
http://i42.photobucket.com/albums/e341/saromans134/POFAimpoint.jpg

saromans134

03-26-08, 17:45

Okay I needed to put something else in since that last one was complete... Here are my Larue uppers on Stag lowers I put together.

1) 16" Larue upper with 11.0 Larue rail, Stag lower with stag lower parts kit, Leupold MRT in Larue mount with Magpul CTR stock and MIAD grip, and Troy flip up front sight.
http://i42.photobucket.com/albums/e341/saromans134/Laruewscope2.jpg

2) 12" Larue Stealth upper with 11.0 rail, Stag lower and lower parts kit, Magpul stock and grip again, Aimpoint ML3 w/ 2moa dot and Hensoldt magnifier in Larue flip over mount (poor boy special)
http://i42.photobucket.com/albums/e341/saromans134/12Larueportside.jpg

I just recently decided to try out the Meopta Meostar R1 1-4 and have not had a chance to take pictures or put it through it's paces yet.

altav

03-26-08, 18:31

Damn nice.

Thanks Kev. It was your URX MRE that rekindled my interest in the idea - I just got lucky that the wrench for the aluminum barrel allows such configurations.

altav

03-26-08, 18:33

Nice!

Thanks. I'm still trying to get the lighting down, but I think I've made some progress with my G9 over the past few months. :)

altav

03-26-08, 19:09

With carbine URX lower rail installed. And for those wondering, the upper began life as a basic Noveske N4 with a standard FSB.

http://www.picrypt.com/users/altav/pistola/kac_47_2.jpg

adh

03-27-08, 09:31

With carbine URX lower rail installed. And for those wondering, the upper began life as a basic Noveske N4 with a standard FSB.

http://www.picrypt.com/users/altav/pistola/kac_47_2.jpg

We need more pics of that......especially the complete weapon.....schweet:D

markm

03-27-08, 19:22

http://photos21.flickr.com/29332061_4dc8725189.jpg

"He hates these cans!"

DIE, Gas Pumper!

hossb7

03-28-08, 03:07

my first AR at it's current stage:

http://i73.photobucket.com/albums/i231/hossb7/ar151.jpg

stag lower
cmmg 14.5" upper w/ pinned 5C1
troy industries mrf-di
troy industries BUIS
magpul ctr
magpul miad
TA33-8

next up is a Vickers sling, some KAC rail covers and maybe a VFG :D

Robb Jensen

03-28-08, 05:33

http://img.photobucket.com/albums/v408/gotm4/gunpics/9e2c7658.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/55bf5355.jpg

One of my Frankengun SBRs:

DPMS lower & LPK. LMT stock and receiver extension. CMT H2 buffer w/Brownells chrome silicon buffer spring. Magpul MIAD grip and triggerguard. CMT upper receiver. PRI gas buster charging handle. Colt semi bolt carrier. LWRC Advanced Combat Bolt w/BCM cam pin and firing pin. Bushmaster 12.5" 1x9 barrel (reamed with 5.56mm NATO neck and throat reamer). Daniel Defense 7.0 Lite Rail. ADM Aimpoint mount with Aimpoint M2. Troy rear sight.

tiger seven

03-29-08, 11:18

My brother and I put this together recently, just for kicks mostly.

http://i3.photobucket.com/albums/y82/zulu15/A1.jpg

Vintage Colt A1 upper purchased at last year's Knob Creek show, mated to a spare lower he had. Very fun to shoot, and it runs great. I'd almost forgotten what a full-size rifle feels like. :)

Derek

ARin

03-29-08, 12:30

http://img1.uploadhouse.com/fileuploads/1537/1537973fb7968d2c88b54924410906cc99c5875.jpg

David Thomas

03-29-08, 12:51

http://img.photobucket.com/albums/v441/DavidThomas/GOTM4oldupper014.jpg

http://img.photobucket.com/albums/v441/DavidThomas/GOTM4oldupper006.jpg

los

03-29-08, 17:56

Testing the new camera.....

M&P15T

http://i2.photobucket.com/albums/y6/los3088/15Toutdoors004-30.jpg

http://i2.photobucket.com/albums/y6/los3088/15Toutdoors010-30.jpg

http://i2.photobucket.com/albums/y6/los3088/15Toutdoors026-30.jpg

http://i2.photobucket.com/albums/y6/los3088/15Toutdoors020-30.jpg

9MX

03-30-08, 21:37

http://img.photobucket.com/albums/v426/9MX/ipscar1.jpg

16inch SS WOA barrel

I'm thinking of replacing the standard buffer with an Enidine

:)

comp1911

04-03-08, 14:26

Took some new pics, on tile this time. [;)]

Noveske barrel and lower, BCM BCG, 12" LaRue tube and CMT to round it out.

http://img.photobucket.com/albums/v224/comp1911/Guns/Noveske%20RECCE/IMG_1526.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Noveske%20RECCE/IMG_1527.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Noveske%20RECCE/IMG_1530.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Noveske%20RECCE/IMG_1534.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Noveske%20RECCE/IMG_1535.jpg

GTS Lower, 16" Operator barrel, 12" LaRue tube again, Troy BUIS set, Millet DMS in LaRue SPR-E mount
http://img.photobucket.com/albums/v224/comp1911/Guns/Operator%20RECCE/IMG_1543.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Operator%20RECCE/IMG_1542.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Operator%20RECCE/IMG_1539.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Operator%20RECCE/IMG_1540.jpg

Another GTS lower with Operator barrel, 9.0 LaRue etc.
http://img.photobucket.com/albums/v224/comp1911/Guns/Operator/IMG_1544.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Operator/IMG_1545.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Operator/IMG_1546.jpg
http://img.photobucket.com/albums/v224/comp1911/Guns/Operator/IMG_1547.jpg

allmixedup

04-03-08, 19:10

http://img292.imageshack.us/img292/9740/allmixedupm4gy7.jpg

- Double Star Lower Receiver
- Rock River Arms 6 Position Stock
- JP Rifles Anti-Walk Pins
- White Oak Armament 2 Stage Trigger
- Acog TA31F Scope
- Noveske N4 Basic Upper
- Noveske Rear Folding Sight
- Vortex Phantom Flash Hider
- H2 Carbine Buffer
- Stream Light TLR 1 Light
- Command Arms Bayonet Adapter

After several builds, I found simplicity is for me.

longshot

04-03-08, 21:53

http://i209.photobucket.com/albums/bb27/angsniper/P7180007.jpg
http://i209.photobucket.com/albums/bb27/angsniper/P7180006.jpg
http://i209.photobucket.com/albums/bb27/angsniper/P7180003.jpg

ARin

04-06-08, 01:31

[IMGhttp://i209.photobucket.com/albums/bb27/angsniper/P7180006.jpg
[IMGhttp://i209.photobucket.com/albums/bb27/angsniper/P7180003.jpg[/IMG]

nice fakepoint.:p

longshot

04-06-08, 08:34

Yeah but it works.

VA_Dinger

04-06-08, 08:36

Yeah but it works.

And that's all that truly matters.

Nice rifle by the way, I like the green.

Lumpy196

04-06-08, 09:52

:rolleyes: No comment.

VooDoo6Actual

04-06-08, 20:27

http://i40.photobucket.com/albums/e225/teehee321/IMG_1218.jpg

http://i40.photobucket.com/albums/e225/teehee321/IMG_1220.jpg

http://i40.photobucket.com/albums/e225/teehee321/IMG_1217.jpg

http://i40.photobucket.com/albums/e225/teehee321/IMG_1221.jpg

VooDoo6Actual

04-06-08, 20:51

http://i40.photobucket.com/albums/e225/teehee321/IMG_1235.jpg

http://i40.photobucket.com/albums/e225/teehee321/IMG_1236.jpg

Razorhunter

04-06-08, 20:54

Nice setup Hoplo,
Who's Multicam MOLLE Chest rig is that? Eagle?

VooDoo6Actual

04-06-08, 20:56

good copy

Mantis

04-09-08, 09:47

PWA Commando

http://i11.photobucket.com/albums/a192/XHairs/Selene_4.jpg

http://i11.photobucket.com/albums/a192/XHairs/Selene_9.jpg

Raiden

04-09-08, 22:28

I just plugged all the parts in for my plain vanilla 1st-ever AR.

http://www.theforbiddenjungle.com/offsite/smDSCF3172_ar_left.jpg

16" Sabre 1:7 Mid-Length Upper
Noveske BCG
PRI Gas Buster charging handle
Vortex flash hider
Colt side sling mount
LMT lower
Magpul goodies in the grip area

...and a nasty old Colt carry handle, because I like the looks.

Rik

04-09-08, 23:03

http://img.photobucket.com/albums/v289/tx_dutchman/Rifles/AR15/DSC04486Medium.jpg

Stickman

04-10-08, 11:00

http://stickman.rainierarms.com/galleries/AR15%20Rifles/IMG_4209%20Stick.jpg

markm

04-10-08, 11:16

Did you just find that weapon laying on the deck like that?:p

Severian

04-10-08, 11:18

blank

SuicideHz

04-10-08, 11:20

Wow. Is that the "Bag o' Gun" I saw on Rainierarms.com? ;)

RogerinTPA

04-10-08, 17:56

Stick you have the coolest toys to play with!:cool:

SuicideHz

04-12-08, 00:18

Wow. Is that the "Bag o' Gun" I saw on Rainierarms.com? ;)

Stick- did you change the picture out on me? What happened to the rifle in the bag?

:confused:

David Thomas

04-12-08, 10:45

http://img.photobucket.com/albums/v441/DavidThomas/145midlengthtan006.jpg

Stickman

04-13-08, 21:48

Stick- did you change the picture out on me? What happened to the rifle in the bag?

:confused:

That picture was only up for a minute!

jroc

04-14-08, 17:52

docsherm

04-14-08, 21:23

http://img.photobucket.com/albums/v441/DavidThomas/145midlengthtan006.jpg

What kind of upper is that? Is that a 14.5 barrel?

RallySoob

04-17-08, 08:45

Bad cell phone pic, but it works I guess...

http://i136.photobucket.com/albums/q198/RallySoob/latestpic.jpg

USMC

04-17-08, 10:27

http://img.photobucket.com/albums/v602/USMC/AR15/Shoot1.jpg

jgraham

04-17-08, 19:52

http://i256.photobucket.com/albums/hh175/jg15photo/IMG_1795.jpg

http://i256.photobucket.com/albums/hh175/jg15photo/IMG_1796.jpg

http://i256.photobucket.com/albums/hh175/jg15photo/IMG_1886.jpg

http://i256.photobucket.com/albums/hh175/jg15photo/IMG_1813.jpg

http://i256.photobucket.com/albums/hh175/jg15photo/IMG_1669.jpg

http://i256.photobucket.com/albums/hh175/jg15photo/IMG_1881.jpg

Staind503

04-18-08, 11:23

My M&P15FT with added comp and my Sig Sauer P229

http://i287.photobucket.com/albums/ll151/Staind503/Picture010.jpg

Cameron

04-18-08, 18:18

Colt/LMT
http://i561.photobucket.com/albums/ss60/cameron_personal/Old%20Guns/ColtLMTRight.jpg

docsherm

04-18-08, 18:21

Cameron-
That is a nice blaster. How do you like that IOR Scope?

Cameron

04-18-08, 18:36

It is a great scope. The optics are clear and let in a lot of light, comparable to a Leupold SPR 1.5-5

The CQB reticle is great with a fast horseshoe for CQB on 1.1power and the precise dot for 4 power. The BDC is the reason that I got it though, set up like an ACOG the range finding is fast and the elevation hold overs are perfect. A friend and I have used them out to 700 yards and they work well. The BDC also works with 7.62 NATO 147gr ball too, so I have one for my DSA FAL too.

Great customer service from the guys at IOR I recently had a small issue with another scope and they were extremely prompt at simply replacing the scope with a brand new unit, even though I had kryloned the whole scope. Truly great guys at IOR.

Cameron

Staind503

04-18-08, 19:00

Hey cameron how do you like that stock? i want one but i cant seem to find one. i love the look of it. and i probably wont get one cause mass doesnt allow folding stocks:mad:

norshon3

04-18-08, 20:47

Long time lurker, 1st time poster....have enjoyed the Board very much.

Just got my sbr NFA paperwork back and put everything together.

http://i26.tinypic.com/21bn81g.jpg

http://i31.tinypic.com/10n7vuu.jpg

Colt 6920 lower
LMT 10.5" (Mk18 Mod0) upper
Knights RAS
Surefire M961XM07 light
Aimpoint M2 w/ tan rubber cover and flip caps.
ARMS cantilever mount
cut-down Colt carry handle (BUIS)
Vltor padded sling
TangoDown forward grip
Daniel Defense Swivel attachment
CQD rear sling mount (not mounted/shown)
a few new CProducts orange-follower magazines
and a LMT bolt-carrier-group.

* I would like to send the lower off to have the proper engraving done "MK18 MOD0 CARBINE -anchor- CRANE, INDIANA"

http://i31.tinypic.com/afahx0.jpg

I am also trying to do a bit of research on Insight Technology products....specifically the PEQ-2; PAQ-4; CVL (PEQ-5) and PEQ-15 (ATPIAL) and/or a decent suppressor.

Thank You again.....

Ridge_Runner_5

04-20-08, 13:06

http://i17.photobucket.com/albums/b100/89Sunbird/Dsc_0028.jpg
http://i17.photobucket.com/albums/b100/89Sunbird/Dsc_0030.jpg

ARin

04-22-08, 02:41

ttp://i17.photobucket.com/albums/b100/89Sunbird/Dsc_0028.jpg
ttp://i17.photobucket.com/albums/b100/89Sunbird/Dsc_0030.jpg

rarely see those railed plastic handguards anymore. how are they holding up?

Ridge_Runner_5

04-22-08, 16:38

There is a wee bit of wobble between them, but otherwise function great...the weak part in my setup is the screw-on VFG...it can come loose if too much pressure applied, and when that happened it scratched up my thumb after it got caught in the rails...

But Im saving up for a CASV-EL :)

Stickman

04-23-08, 07:26

http://stickman.rainierarms.com/galleries/Daniel%20Defense%20II/IMG_0360%201028%20Stick.jpg

Ridge_Runner_5

04-23-08, 11:38

Giggidy, Stick, as usual...

http://i17.photobucket.com/albums/b100/89Sunbird/AR-15/100_5896.jpg
http://i17.photobucket.com/albums/b100/89Sunbird/AR-15/100_5898.jpg

docsherm

04-23-08, 16:59

I think you dropped some ammo.:D Nice blaster.

SilentButDeadly

04-24-08, 09:13

LMT MRP
http://i93.photobucket.com/albums/l53/tgianotti/DSC00622.jpg
http://i93.photobucket.com/albums/l53/tgianotti/DSC00620.jpg

usmcchet9296

04-24-08, 23:12

This is my rifle
there are many like it
but this one is mine
..............er flashback
Anyway this is my AR
Its a Bushmaster upper and lower with a ARMS S.I.R. system, reflex sight, and flipup front/rear sights.
http://www.oniva.com/upload/204/AR15_2.JPG

http://www.oniva.com/upload/204/AR15.JPG

This is how it started but Im gonna sell the 20inch upper and just focus on tricking out my 16inch upper

http://www.oniva.com/upload/204/gun007.jpg

5Bshooter

04-26-08, 09:50

Three projects finally getting close to being done. Recce, M4gery, and an accuracy/varmint rig.

http://i161.photobucket.com/albums/t210/rapfoto/_DSC72301of1.jpg

http://i161.photobucket.com/albums/t210/rapfoto/_DSC7238-Version21of1.jpg

SuicideHz

04-27-08, 13:08

http://www2.zoto.com/suicidehz/img/800x600/de4d43378ee8e5d62962921eaac652ed.jpg

docsherm

04-27-08, 13:30

http://www2.zoto.com/suicidehz/img/800x600/de4d43378ee8e5d62962921eaac652ed.jpg

That is a GREAT Blaster!! I like the simplicity of it. It looks very lightweight. Do you run any optics on it? Is the a 11.5 barrel?

SuicideHz

04-27-08, 13:40

Thanks!

Yes, 11.5" BCM barrel.

I have an older Aimpoint- ML/XD but I ran into a problem when turning the front lens cap. Let's just say it's not pretty and I'm waiting to hear back from WasatchAR...

:)

Ron S.

04-28-08, 20:28

AMMOTECH

04-28-08, 20:37

My first AR/ My Plinker:

Bushmaster A3 Post Ban Carbine (I'm a NY'er), pre-ban Colt mags, Ace Stubby Skeleton Stock, Bushmaster rail handguard (4-rail), etc. etc. You get the idea. Nothing special, just sharing.

http://img.photobucket.com/albums/v611/remulac/M4.jpg

I don't cut on folks for their weapons or set-up but your optic is killing me! How do you see thru it way up there? It looks like you could remove your handle and bring that thing back down to earth.:eek:

Ron S.

04-28-08, 20:39

I don't cut on folks for their weapons or set-up but your optic is killing me! How do you see thru it way up there? It looks like you could remove your handle and bring that thing back down to earth.:eek:

I'm a big guy, with a big head, and with that itty bitty stock, it's actually extremely comfortable "way up there". Looks silly, sure, but it's oh so comfy. I'm not a "nose to the op-rod" kinda guy, especially not when I'm just plinking and using it for HD. When I bring it up, the sight just lands right where it needs to be.

Oh, and please.."cut" me up. I'd like some opinions on my setup.

AMMOTECH

04-28-08, 20:41

Oh, and please.."cut" me up. I'd like some opinions on my setup.

Well OK; Get a sling! All rifles should have a sling; just like all pistols should have a holster!

How's that? :D

Ron S.

04-28-08, 20:49

Well OK; Get a sling! All rifles should have a sling; just like all pistols should have a holster!

How's that? :D

Oh I have a sling, no doubt. I JUST, and I mean JUST put the rail and stock on, and it took a bit, and I'm tired, so I didn't get the sling back on yet. :D

Seriously, though...any critique?

grappler

04-29-08, 01:10

No, it's cool...

He can shoot from the hip and still pick up the reticle in his optic...:D :D

ARin

04-29-08, 02:06

ah, the old CHIN TO THE CHARGING HANDLE method.:D

live2offroad

04-29-08, 08:25

http://i17.photobucket.com/albums/b100/89Sunbird/Dsc_0028.jpg
http://i17.photobucket.com/albums/b100/89Sunbird/Dsc_0030.jpg

Tell me about the rails on this hand guard please, I have the same fore-grip and want to put rails on..

-Peter

Paulinski

04-29-08, 08:29

http://www2.zoto.com/suicidehz/img/800x600/de4d43378ee8e5d62962921eaac652ed.jpg

I really like this set up - great job.

Cameron

04-29-08, 10:30

http://i561.photobucket.com/albums/ss60/cameron_personal/Old%20Guns/ColtHBARVLTOR03.jpg

Creature

04-29-08, 15:59

Cameron,

Nice rifle. How do you like the Vickers sling?

Cameron

04-29-08, 16:26

Thank, The Vickers Slings are excellent I have one on every rifle.

Stickman

04-30-08, 00:08

Noveske Rifleworks N4 Light Recce Basic (http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=un4lrb&cat=48&page=1&search=&since=&status=)

http://stickman.rainierarms.com/galleries/American%20Defense%20MFG/IMG_3468%201028%20Stick.jpg

ARin

04-30-08, 01:30

http://img6.uploadhouse.com/fileuploads/1728/1728389cd1b5e6576aee3b56c8c7d1af9d8f609.jpg

Oscar 319

04-30-08, 01:39

ARin, that gun is sexy....unlike your avitar.

5Bshooter

04-30-08, 07:46

http://img6.uploadhouse.com/fileuploads/1728/1728389cd1b5e6576aee3b56c8c7d1af9d8f609.jpg

Great build. Love the FUG, I guess I need to get one... it never ends.

DM-SC

04-30-08, 09:36

http://i275.photobucket.com/albums/jj290/c2008pictures/G%20Stuff/SG/130001L.jpg

Which brand of front sight is on this shotgun? How is it attached?

RustedAce

04-30-08, 12:11

http://img501.imageshack.us/img501/2982/p4300002vb4.jpg

Cameron

04-30-08, 12:21

Which brand of front sight is on this shotgun? How is it attached?

Hi-Viz friction fit over the standard bead, you can "pop" it off and use the standard brass bead. It came from the factory that way...

Creature

04-30-08, 17:02

Cameron,

That's a Winchester 1300 Defender, right?

5Bshooter

04-30-08, 17:26

nice collection there RustedAce :)

Packman73

04-30-08, 17:51

http://img6.uploadhouse.com/fileuploads/1728/1728389cd1b5e6576aee3b56c8c7d1af9d8f609.jpg
Very nice! I'm doing a sbr build, what length upper is that? Thanks.

Cameron

04-30-08, 22:54

Cameron,

That's a Winchester 1300 Defender, right?

Yes it is.

OutlawDon

04-30-08, 23:09

http://healthbydon.com/ar15sephia.jpg

ARin

05-01-08, 00:12

Very nice! I'm doing a sbr build, what length upper is that? Thanks.

10.5 lmt

Ridge_Runner_5

05-01-08, 01:15

http://i17.photobucket.com/albums/b100/89Sunbird/Shooting/th_100_5901.jpg (http://s17.photobucket.com/albums/b100/89Sunbird/Shooting/?action=view&current=100_5901.flv)
http://i17.photobucket.com/albums/b100/89Sunbird/Shooting/th_100_5902.jpg (http://s17.photobucket.com/albums/b100/89Sunbird/Shooting/?action=view&current=100_5902.flv)

USMC

05-01-08, 12:27

http://img.photobucket.com/albums/v602/USMC/AR15/SBR1x4.jpg

Cameron

05-01-08, 13:53

That is cool as hell!

Olav

05-02-08, 23:34

http://i218.photobucket.com/albums/cc212/olava1/ar15/ar15flowersEnhanced.jpg

http://i218.photobucket.com/albums/cc212/olava1/ar15/ar1carpetEnhanced.jpg

JoshNC

05-03-08, 21:20

http://i218.photobucket.com/albums/cc212/olava1/ar15/ar15flowersEnhanced.jpg

http://i218.photobucket.com/albums/cc212/olava1/ar15/ar1carpetEnhanced.jpg

Nice ZM! How about some detailed pictures showing field stripping of the gas system?

Olav

05-03-08, 21:50

Here's the return spring on top of the gas key op rod and gas tube...

http://i218.photobucket.com/albums/cc212/olava1/ar15/LR300_Gas2.jpg

http://i218.photobucket.com/albums/cc212/olava1/ar15/LR300_Gas1.jpg

I'll get some more pics later...

Razorhunter

05-04-08, 01:48

Olav

05-04-08, 08:24

This is a very interesting rifle. I still don't understand how it is not a Piston, but rather a DI system? That's what I read in your other thread, but I don't really know how it works? Thanks for posting!

I guess you'll have to ask yourself why you think it is a piston system in the first place.
You won't be able to find a piston anywhere...

Gas goes down the gas tube into the bolt key just like a normal AR but the bolt key's tube where the gas tube fits in is extra long. The result is excess gas/debris doesnt go into the reciever but stays localized to the bolt carrier group because the gas tube and the bolt key tube never seperate.

The return spring surrounds the extra long bolt key tube.

That't it. Real simple but excellent.

I hope this description helps.

Otherwise you'll just have to believe me and take it on faith until you get to see one just like you take it on faith that man went to the moon.

los

05-04-08, 08:30

http://i2.photobucket.com/albums/y6/los3088/329-30framed.jpg

8200rpm

05-04-08, 11:47

http://img509.imageshack.us/img509/1408/dsc0006cu8.jpg

http://img261.imageshack.us/img261/2926/dsc0004sw1.jpg

Razorhunter

05-04-08, 12:14

Thanks Olav,
No worries, we all take your word on it, and no one is doubting you in any way. That was our way of asking for your explanation of the system. Such a different design only warrants a full explanation, which we now have. Thank you sir.

recon by fire

05-04-08, 15:55

http://img.photobucket.com/albums/v472/millwright/M4pic.jpg
http://img.photobucket.com/albums/v472/millwright/M4pic3.jpg

NCPatrolAR

05-06-08, 00:48

Dissipator:

http://i176.photobucket.com/albums/w167/DefConNC/DSC01720.jpg

Standard Carbine:

http://i176.photobucket.com/albums/w167/DefConNC/DSC01727.jpg

Steven T

05-06-08, 10:21

NCPatrolAR

05-06-08, 12:05

NCPatrolAR a couple of questions on your Dissipator. What type of rail did you use, looks like an M.I. or Troy? Secondly did you have to modify the gas block to fit. I've been wanting to rail my Dissipator for a while but never was able to find out what would fit except for the Yankee Hill stuff. Thanks.
Steve.

I used one of the MI free float rails. All I had to do was take the delta ring off and place the rail on there. There wasnt a single problem with the gas block on the gun; the rails slide over top of it without a moment's interference. :D

The Archangel

05-06-08, 13:30

http://www.mustangmods.com/ims/u/128/11621/236420.jpg

http://www.mustangmods.com/ims/u/128/11621/236482.jpg

http://www.mustangmods.com/ims/u/128/11621/236421.jpg

http://www.mustangmods.com/ims/u/128/11621/236483.jpg

http://www.mustangmods.com/ims/u/128/11621/236422.jpg

http://www.mustangmods.com/ims/u/128/11621/236484.jpg

Trunk Gun

http://www.mustangmods.com/ims/u/128/11621/236427.jpg

http://www.mustangmods.com/ims/u/128/11621/236428.jpg

Steven T

05-06-08, 14:04

I used one of the MI free float rails. All I had to do was take the delta ring off and place the rail on there. There wasnt a single problem with the gas block on the gun; the rails slide over top of it without a moment's interference. :D

Thank you that's a big help.

The Archangel

05-06-08, 14:22

Here is the M4 before I went crazy and painted it.

http://www.mustangmods.com/ims/u/128/7703/172031.jpg

SBR with AAC M4 2000 Mod 7

http://www.mustangmods.com/ims/u/128/7703/172032.jpg

http://www.mustangmods.com/ims/u/128/7703/172030.jpg

http://www.mustangmods.com/ims/u/128/7703/172033.jpg

http://www.mustangmods.com/ims/u/128/7703/172035.jpg

Cameron

05-06-08, 22:22

Great looking guns The Archangel.

grappler

05-06-08, 22:45

**ARCHANGEL**

******' Sexy!!

Edited by Va_Dinger to remove questionable language.

5Bshooter

05-07-08, 06:29

very nice Arch, very nice!

The Archangel

05-07-08, 09:56

Thanks fellas.

I really like the two-tone look now and I just painted the SOPMOD stock last night. My next few builds will have that look. I've got a 16" Middy project that I'm working on. I'm heavily leaning towards getting a Daniel Defense 12.0 Lite rail for it. Haven't decided on the new Aimpoint M4 or T1 yet. I wanted the T1 for a while, but I might just wait for the 2 MOA since I plan on using the magnifier with it. It's all dependent on how much my tax return will be. :D

Let's see some more pics!

mikewads

05-08-08, 16:34

http://i77.photobucket.com/albums/j79/mikewads/IMG_3456Blur.jpg

Where here is my first AR build. Thanks to this site and others for helping me pick high quality parts the first time around. Here are the specs:

LMT Lower receiver
LMT Upper receiver
LMT Bolt Carrier Group
LMT 2-Stage trigger
LMT SOPMOD stock
Daniel Defense Omega Rail
EOTech 552 Holographic Weapon Sight
Troy Rear Folding Battle Sight
SureFire X300 Weapon Light
LaRue Forward Universal Grip

karmapolice

05-08-08, 19:16

nice build, with great components, but fyi its a magazine not a clip.

USMC03

05-08-08, 19:29

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0312.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0313.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0314.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0315.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0316.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0317.jpg

S/F,
Jeff

koldt

05-08-08, 19:49

I know this isn't as nice as the guns you guys have in America. We have to take what we can get here in Canada.

http://www3.telus.net/hansonk/C8a2kit.1.jpg

Ron S.

05-08-08, 20:32

HA..."poor fella". :D

Ridge_Runner_5

05-09-08, 01:46

Nice build, Mike...that stock and buttpad look pretty comfy! :)

markm

05-09-08, 08:18

That's funny!! The Elcan alone would have put the gun in the over-weight catagory!! I'd love to pull that out as a prank in my next carbean class.

recon by fire

05-09-08, 08:26

I know this isn't as nice as the guns you guys have in America. We have to take what we can get here in Canada.

http://www3.telus.net/hansonk/C8a2kit.1.jpg

That optic is an M145 machine gun optic, right? It has a ballistic stadia retical, and the stadia lines are set for the trajectory of 7.62x51. Is there there a variation that has 5.56 stadia lines? I've never seen one.

markm

05-09-08, 08:57

That optic is an M145 machine gun optic, right? It has a ballistic stadia retical, and the stadia lines are set for the trajectory of 7.62x51. Is there there a variation that has 5.56 stadia lines? I've never seen one, and I'm an Army weapons instructor.

The Elcan is commonly used on Canadian flat top versions of the A2 I think. I believe, do to weight, US mil only puts them on 240s and such. We may have a retical specific to that role. :confused:

koldt

05-09-08, 09:54

The Elcans; C79, Spectre DR, and M145, (as seen configuration) are not that much heavier than the Acog. However along with the minimal weight addition comes far superior optics. However that is another discussion.

Yes, the M145 has a 5.56 reticule, and that is what is in this tube. That's what we are here for, is it not, to learn new stuff??

And "Hello" Capt Obvious, yes this carbine is heavy. I didn't put the picture up trying to pretend this is my duty rifle or anything of that nature. Rather than putting up another one similar to the other 285 pages of pictures, I didn't think there were that many of this manufacturer or with these accessories. I tried to have a little diversity, spice of life, kind of thing.

markm

05-09-08, 10:11

Easy, Tiger. I thought the pic was for humor. No hard feelings! :)

koldt

05-09-08, 11:44

Although, at our local club we do have some night shoots/campouts, with some BBQ and wobbly pops after the guns go away. So I have played with this monster on the range. Took it from the Pelican, onto the shooting blanket and back. Looked funky on a team photo.

I just have to figure out how to mount the bayonet. Maybe some duct tape.:p

koldt

05-09-08, 11:46

P.S. I noticed the pronounciation of car bean.:D

Cameron

05-09-08, 17:29

That optic is an M145 machine gun optic, right? It has a ballistic stadia retical, and the stadia lines are set for the trajectory of 7.62x51. Is there there a variation that has 5.56 stadia lines? I've never seen one.

Keep in mind that M80 and M855 have extremely close trajectories out to about 500 meters.

Cameron

Razorhunter

05-10-08, 01:10

That UBR Stock is WICKED. Damnit. When is Magpul going to have them available? !

Robb Jensen

05-10-08, 06:25

P.S. I noticed the pronounciation of car bean.:D

Fox News pronounces it 'carbon'. ;)

BushmasterFanBoy

05-10-08, 06:48

P.S. I noticed the pronunciation of car bean.:D

Isn't that how you're supposed to say it?

http://i224.photobucket.com/albums/dd283/Burke888/Cleaning.jpg

Scattergun

05-10-08, 16:37

I have been changing my AR-15A3 Carbine again. I removed the handle and added an ACOG scope with LaRue mount.

http://img.photobucket.com/albums/v682/allproblemsolved/guns/AR-15/ACOG640x480.jpg

http://img.photobucket.com/albums/v682/allproblemsolved/guns/AR-15/M4Rifle.jpg

I also modified a COLT M4 side sling mount so It will work with a HK hook and sling.

http://img.photobucket.com/albums/v682/allproblemsolved/guns/AR-15/M4slingmount640x480.jpg

I am now waiting on the TROY folding rear sight.

thompson1774

05-11-08, 02:17

Scattergun

05-11-08, 07:31

How did you make the sling mount? This is awesome work. If that could be mass produced, I'd grab one in a minute.

I also modified a COLT M4 side sling mount so It will work with a HK hook and sling.

Thanks, I have been a Machinist for over 20 years.
I machined out the Colt mount and machined the eyelet insert, pressed the two together and drilled the holes and pressed in two roll pins. Glass beaded the complete unit and parkerized it.

I have started another one for my 9MM carbine, but I didn't use a Colt mount. It was another manufacture and isn't the same quality casting as the Colt mount. I haven't decided of I am going to use it or not and may pick up another Colt mount and modify it. The Colt mount cost $40.00 @ Brownells and the other one was a $20 gun show pick up. They look alike, but when the two are side by side, they are NOT the same..

koldt

05-11-08, 10:23

Let's simplify things a little.
14.5 light barrel, old school build.

http://www3.telus.net/hansonk/c8a1.jpg

wild_wild_wes

05-11-08, 11:48

http://img.photobucket.com/albums/v682/allproblemsolved/guns/AR-15/M4slingmount640x480.jpg

What would be even better (and simpler? from a machining viewpoint) would be a socket for a QD sling swivel...

USMC03

05-11-08, 12:12

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0332.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0335.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0334.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0336.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0338.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0341.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0343.jpg

http://i278.photobucket.com/albums/kk99/USMC03_photos/Sabre%20Defense%20Foliage/IMG_0342.jpg

S/F,
Jeff

Robb Jensen

05-14-08, 07:52

My 3gun rifle:

http://img.photobucket.com/albums/v408/gotm4/competition%20pics/3gunARs1.jpg
http://img.photobucket.com/albums/v408/gotm4/competition%20pics/3gunARs6.jpg

My wifes 3gun rifle:

http://img.photobucket.com/albums/v408/gotm4/competition%20pics/3gunARs7.jpg
http://img.photobucket.com/albums/v408/gotm4/competition%20pics/3gunARs11.jpg

b_saan

05-15-08, 00:34

I think I'm finally done tweaking this one...

http://img80.imageshack.us/img80/7514/img0007abf0.jpg

Time to start on the next :D

Ridge_Runner_5

05-15-08, 00:58

Nice setup! Ta33R8?

b_saan

05-15-08, 01:20

Thanks! It's a TA11 Red Donut on the Larue LT-100.

Full details:
Started life as a N4 Light Carbine Low Profile 14.5 w/ pinned SureFire FH556
Changed out the TD Grip to an Ergo Ambi Suregrip
Vltor Basic to an EMOD
TD Vert Grip
BFG Vickers Two Point Padded Sling with QD swivels
Streamlight TLR-1 with remote cap/switch
Timney 3lb trigger
Magpul enhanced trigger guard
Surefire ladder protectors
and a plethora of PMags :D

Ridge_Runner_5

05-15-08, 01:24

Gotcha! Im lookin at trading in the EOTech for an ACOG, but want the chevron...

Ian02

05-15-08, 15:58

.....

Mantis

05-15-08, 17:06

http://i11.photobucket.com/albums/a192/XHairs/Kana112.jpg

ArmedSuspect

05-15-08, 22:48

http://i264.photobucket.com/albums/ii180/ArmedSuspect/DSC00197.jpg

http://i264.photobucket.com/albums/ii180/ArmedSuspect/DSC00202.jpg

http://i264.photobucket.com/albums/ii180/ArmedSuspect/DSC00194.jpg

SuicideHz

05-16-08, 16:47

http://www2.zoto.com/suicidehz/img/1024x768/c4370e4cf3572fa76fd3c3eab095095d.jpg

Scattergun

05-16-08, 19:48

What would be even better (and simpler? from a machining viewpoint) would be a socket for a QD sling swivel...

I guess that is a matter of opinion, I like the HK hook.

Packman73

05-16-08, 19:53

This is the beginning of my SBR.

http://i241.photobucket.com/albums/ff183/packerfanxd/001-1.jpg

usmcchet9296

05-18-08, 00:36

I took some pictures of my reciently re-scoped Bushmaster at the range today
I installed a Millet 1x4 and am happy with the results

http://www.oniva.com/upload/204/5-17-08_gunz_3.JPG

http://www.oniva.com/upload/204/5-17-08_gunz_11.JPG

http://www.oniva.com/upload/204/5-17-08_gunz_12.JPG

Have a nice day............... :)

http://www.oniva.com/upload/204/5-17-08_gunz_9.JPG

http://www.oniva.com/upload/204/5-17-08_gunz_10.JPG

SilentButDeadly

05-18-08, 15:43

http://i93.photobucket.com/albums/l53/tgianotti/DSC00677.jpg

Cameron

05-19-08, 03:30

http://i561.photobucket.com/albums/ss60/cameron_personal/Daniel%20Defense%20SPR/DDSPR02.jpg

usmcchet9296

05-19-08, 09:22

Nice rigs

Furious

05-19-08, 20:55

All of these nice pictures are gonna make me spend more money

Furious

05-19-08, 20:55

More money than I alredy have , that is

TriggerTX

05-19-08, 21:34

http://img145.imageshack.us/img145/8457/dsc03636oq3.jpg

http://img120.imageshack.us/img120/9269/dsc03149dc9.jpg

usmcchet9296

05-19-08, 22:56

Its nice to see rigs in the field
RiggerTX what kinda bi-pod is that?

TriggerTX

05-19-08, 23:08

Its a Bobro Gen2. A really nice, light, less obtrusive bipod. You can find 'em at Rainier Arms, I patiently awaited the release and picked one up the day they hit the market.

RiverBend

05-20-08, 05:26

Brownells Gas Block w/Bayonet adapter, Yankee Hill BUIS, Original Holo Sight by Bushnell
:D

usmcchet9296

05-20-08, 14:52

Thanks TriggerTX
a little rich for my blood but then again Im not getting shot at like you are
paper targets dont fire back ;)

lindertw

05-20-08, 19:47

almost done! I picked up an Aimpoint T-1 and installed it today; weight as pictured = 7 lb 3.2 oz (rubber lens cover adds another 0.3 oz)

http://tinyurl.com/6jzu69

Details:

Noveske N4 light carbine basic upper (w/perm attached Surefire 556-212A)
Noveske lower (w/CMT LPK and Bill Springfield 4.5# trigger job)
M4 buttstock w/H buffer
A2 grip
LaRue BUIS
Aimpoint T-1 w/LaRue tall mount
Vickers sling

After adjusting the Aimpoint, I took the mount off the Noveske and installed it on my Colt 6920 - wouldn't you know it the sight is almost dead on on the 6920! I'll confirm at the range this weekend, if I can hold minute of bad guy on both primary and backup then that'll be alright with me. All that's left is to mount my X300...

jhova98040

05-21-08, 11:17

Here is my first post:

Complete 16" LMT Defender 2000 M4 with:

Aimpoint Comp M4
LMT F/A M16 BCG
Magpul UBR
Magpul MAID
Magpul enhanced trigger guard
KAC 2-stage trigger
KAC 300m BUIS
LaRue 7.0 Rail
Tango Down VFG
Surefire M951 light

http://img210.imageshack.us/img210/5991/sl380387ei8.jpg (http://imageshack.us)

*Please excuse the 10rd and maglock--I am currently in CA for school. Summer break starts in a week, then back home to my 30 rounders and no lock.

Gunfighter.45

05-21-08, 15:11

My upgraded LE6920
List of Upgrades
1.DD 7in Lite Rail
2.LMT SOPMOD
3.Troy Rear Folding Buis
4.Magpul Miad Grip/Trigger Guard
5.KNS Pin Kit
6.Smith Vortex Flash Hider

List of Accessories
1.EOTECH 557
2.Pentigon Light system
3.Vickers Tactical Sling
4.TD Front V grip- is on the way

http://i165.photobucket.com/albums/u57/gunfighter308/DSCN0417.jpg

Razorhunter

05-21-08, 16:08

USMC03

05-21-08, 16:19

jhova98040

05-21-08, 17:22

jhova,
Where did you get the UBR stock? Also, how do you like the the KAC 2 stage trigger, and have you compared it to an Armalite NM 2 stage, or a Geisselle, etc?
Thanks.

I got the UBR from GTS/Denny's; it seems great thus far. Haven't shot with it yet (just got it last night), but it seems solid. It replaced a SOPMOD.

As for the KAC 2-stage--I really like it... The only other 2-stage I have owned was a LMT. The LMT was nice, but this is way nicer. It is really a pleasure to shoot. It has helped me get much more consistant groups. One caveat, I have heard they only last about 3k rounds, I have no idea if that is true (I only have 200 rds on it).

docsherm

05-21-08, 17:41

http://i278.photobucket.com/albums/kk99/USMC03_photos/Pat%20Rogers%20May%202008/IMG_0581.jpg

S/F,
Jeff

Jeff,

What chest rig is that? And once again great rifle. :)

USMC03

05-21-08, 18:00

Brother Doc,

It was a custom made rig that Diz made for me. You can find Diz in the Tactical Gear forum on this site.

Hopefully I'll have a review of the rig up in a few days. Took some pics this morning.

S/F,
Jeff

docsherm

05-21-08, 18:14

Thanks for the info. I can't wait to read it.

live2offroad

05-21-08, 19:52

Thought I'd share the finished rifle..

http://a734.ac-images.myspacecdn.com/images01/108/l_4e95e0fc2f72f461c12c672728dfc145.jpg

The Sling is 2 point, and a MacGyver build at that. But it works.. The Truglo is a red and green dot with 4 variable reticle settings...

Man is it ever fun to shoot..

But it never looks better than when my wife is shooting it!
http://a920.ac-images.myspacecdn.com/images01/97/l_0b149c76559a6c3a375b7cbc6cee54ff.jpg

-Peter

ess45

05-24-08, 10:28

:)

http://i235.photobucket.com/albums/ee107/ess45/DSC00381_edited.jpg

http://i235.photobucket.com/albums/ee107/ess45/DSC00387_edited-1.jpg

Razorhunter

05-24-08, 11:05

The Noveske N4 low profile carbine got a little dirty this weekend at Pat Rogers' 3 day Carbine Operator's Course ;)

http://i278.photobucket.com/albums/kk99/USMC03_photos/Noveske%20N4/IMG_0634.jpg?t=1211399564

http://i278.photobucket.com/albums/kk99/USMC03_photos/Noveske%20N4/IMG_0640.jpg?t=1211399609

http://i278.photobucket.com/albums/kk99/USMC03_photos/Pat%20Rogers%20May%202008/IMG_0581.jpg

S/F,
Jeff

Hey Jeff,
A few questions for you my man!

1. How do you like that Noveske/SWS rail? I'm thinking of using the AR10 version on my AR10 build.

2. Do the UBR stocks use their own proprietary receiver extensions/buffer tubes?

3. Whose QD Sling Swivels are you using on that Novekse gun? They do not look exactly like my VLTOR, nor do they look like DD swivels (which look exactly like VLTOR swivels). Whose are they?

Yeah, you've always got pictures of your guns on the ground man! Of course, if I had the guns you've got, I'd have a few beaters that I wouldn't mind getting dirty either!

docsherm

05-24-08, 16:12

:)

http://i235.photobucket.com/albums/ee107/ess45/DSC00387_edited-1.jpg

What barrel is that? Very nice.

ess45

05-24-08, 18:49

What barrel is that? Very nice.

Wilson Car length, shortened to 14.5. Thanks.

Robb Jensen

05-24-08, 19:05

http://img.photobucket.com/albums/v408/gotm4/ADM%20mounts/ADM019.jpg
http://img.photobucket.com/albums/v408/gotm4/ADM%20mounts/ADM023.jpg
http://img.photobucket.com/albums/v408/gotm4/ADM%20mounts/ADM002.jpg
http://img.photobucket.com/albums/v408/gotm4/ADM%20mounts/ADM007.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/3gunrifles001.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/3gunrifles010.jpg

krichbaum

05-24-08, 21:03

A few pics of a 16" build getting ready for some fun at the range (just ignore the Sig). It consists of an SDI gov't profile barrel, middie gas, BCM bcg, Spike's lower, RRA two stage trigger, and of course all the other goodies that are visible in the pics. This thing is extremely well balanced with the UBR stock. And so far, not a single glitch.

http://www.krichbaum.net/gallery/albums/userpics/S7300272.JPG

http://www.krichbaum.net/gallery/albums/userpics/S7300273.JPG

http://www.krichbaum.net/gallery/albums/userpics/S7300274.JPG

VooDoo6Actual

05-25-08, 20:20

Robb Jensen

05-25-08, 20:27

[QUOTE=gotm4;168459]http://img.photobucket.com/albums/v408/gotm4/ADM%20mounts/ADM019.jpg
http://img.photobucket.com/albums/v408/gotm4/ADM%20mounts/ADM023.jpg

VERY nice blaster gotm4

How does it shoot and perform ?

Very well thank you......1 malfunction (short-stroke) in 9K rounds. Which I believe to be a Radway Green round while shooting unsupressed at the Vickers staff/mods class in March 08.

VooDoo6Actual

05-25-08, 20:37

Robb Jensen

05-25-08, 20:49

gotm4,

forgive me I do not know the specifics of this gun.

I'm presumming it is a Gas impingment ? or ?

The ADCO T-1 mount is 1/3 Co-witness ? or ?

Which spacers ?

and finally which BCG are you using ?

Thanks

It is direct impingement:
LMT carrier, LMT 'enhanced' bolt, MRP front sight, LMT barrel, LMT upper, lower, 2-stage trigger, VLTOR receiver extension, Magpul stock, rail covers, Tangodown pistol grip (forward and regular), DD 9.0 Lite Rail, Surefire X300 light, Advanced Armament Blackout flash-hider suppressor mount, M4-2000 Mod 07 suppressor, Aimpoint T1 in an ADM T1 mount, Troy rear sight, BlueForceGear Combat Applications sling.

VooDoo6Actual

05-25-08, 21:31

copy
thanks

gotm4,

Is the Co-Witness 1/3 or 1/2 w/ that ADM T-1 mount ?

Cameron

05-26-08, 02:39

At the range today...

http://i275.photobucket.com/albums/jj290/c2008pictures/Metal/AR/DD-LMT/DanielDefenseKifaru.jpg

USMC

05-26-08, 20:34

http://img.photobucket.com/albums/v602/USMC/AR15/vtac1.jpg

usmcchet9296

05-26-08, 21:12

http://img.photobucket.com/albums/v602/USMC/AR15/vtac1.jpg

Nice basic setup Marine

BushmasterFanBoy

05-28-08, 00:25

http://i224.photobucket.com/albums/dd283/Burke888/100_1040.jpg

G00CH

05-28-08, 01:04

Have been wandering the site for quite some time now, and this is my first post so I thought I would share my setup I have so far.
I have been overwhelmed with the abundance of knowledge this site has to offer (which is why it has taken this long to post) I just
want to say thanks to all for the ever so intriguing information, you guys rock! I think now I have a pretty good idea of whats in store
for my next purchase.

http://i254.photobucket.com/albums/hh115/HairyG00CH/021.jpg

Stag Lower w/ LMT -LPK
Stag Upper w/ LMT FA -BCG
Daniel Defense Free Float Omega Rail
Aimpoint Comp M3 in a A.R.M.S mount
Magpul Miad and Enhanced Trigger Guard
MI Buis
Tango Down VFG
LAV 2pt. Quick Adj. Sling

Stickman

05-28-08, 01:51

http://stickman.rainierarms.com/galleries/Charles%20Daly%20Carbines/IMG_3532%201028%20WEVO.jpg

Severian

05-28-08, 20:05

blank

VooDoo6Actual

05-28-08, 20:45

I'm curious STICKMAN what type of Rear Diopter sight is that ?

Thanks

hower610

05-29-08, 13:23

My first AR and build...

Coleman Tyler lower, DPMS LPK, Rock River 2 stage trigger, Del Ton mid length upper.

http://i51.photobucket.com/albums/f390/hower610/100_0464.jpg

http://i51.photobucket.com/albums/f390/hower610/100_0465.jpg

Saginaw79

05-29-08, 18:37

http://stickman.rainierarms.com/galleries/Charles%20Daly%20Carbines/IMG_3532%201028%20WEVO.jpg

Your pics are truly excelent! Nice subject matter too!

USMC

05-29-08, 21:47

http://img.photobucket.com/albums/v602/USMC/AR15/Countryshoot1.jpg

xtremejc

05-31-08, 14:49

http://www.mustangmods.com/ims/u/1360/9272/240406.jpg

http://www.mustangmods.com/ims/u/1360/9272/240408.jpg

SuicideHz

05-31-08, 17:36

Nice shooter!

usmcchet9296

05-31-08, 23:11

Thats a nice shooter

wild_wild_wes

06-01-08, 11:16

Just finished this build yesterday:

http://i304.photobucket.com/albums/nn163/3crowns_photos/PatrolRifle1-1.jpg?t=1212308318

http://i304.photobucket.com/albums/nn163/3crowns_photos/PatrolRifle2-1.jpg?t=1212308336

http://i304.photobucket.com/albums/nn163/3crowns_photos/PatrolRifle3-1.jpg?t=1212308099

Patrol Rifle

CMMG lightweight 16" midlength barrel

CMT upper

Larue BUIS

CavArms handguard

Magpul CTR telestock