AR Picture Thread

[The_War_Wagon]

The very first sticky on this page is the AR Picture thread. It's where photos of new guns belong if people want to show off their new purchase, for the sake of showing off a new purchase.

When the OP's thread is gone, be sure to look there for it. :o

[wetidlerjr]

Welcome to M4Carbine.net. It looks like you have a nice AR there.
You might want to check out the "Sticky" list at the top of this forum for further AR info and use the "Search" feature for even more help. That way you can avoid starting threads on already answered questions. :D

(I'll leave the propriety of this thread to the "Mods" and "Staff" who are the ones tasked with such decisions as I have never cared much for self-appointed "Hall Monitors".) :dirol:

[Millerw289]

Was just excited about my new purchase. Didn't expect assholes to chime in and give me crap about where I posted it. I'm excited and proud and you're a prick. Thanks.

[munch520]

Wow Cesium...way to shit on the new guy. If you take that tone with people in person, I wouldn't blame them for punching you in the throat.

Through all that hot fire you spit, is your attempt to guide a new member towards proper procedure? If it is...I'd venture to say there's another (read: better) way in which to do it.

Lest we forget we were all new once and most likely ****ed up then (and maybe a bit since then). OP, it's true that this forum doesn't promote the 'look at my new gun' threads - in the future, a better place would be the picture thread if you want to show off and talk a bit about your carbine. Explaining why you chose the kit you did, as well as your intended uses, will go a long way with members here as well.

Some stickies that may help you learn the protocol 'round here.

https://www.m4carbine.net/showthread.php?t=70019
https://www.m4carbine.net/showthread.php?t=8796

[bradb55]

Good first choice my friend. I've been a fan of the M&P series for a few years now. S&W built these things right. Enjoy it!

[bradb55]

Welcome to M4Carbine.net. It looks like you have a nice AR there.
You might want to check out the "Sticky" list at the top of this forum for further AR info and use the "Search" feature for even more help. That way you can avoid starting threads on already answered questions. :D

(I'll leave the propriety of this thread to the "Mods" and "Staff" who are the ones tasked with such decisions as I have never cared much for self-appointed "Hall Monitors".) :dirol:

.......and that's the right way to do it.

[buckjay]

And another...

http://buckjay.com/drop/white/kac-14-5.jpg

[TangoSauce]

buckjay, it's pretty clear now why I got such a hell of a deal on that DD Lite rail from you as it looks like you now only rawk KAC rails.

:p

pic thread

http://i1117.photobucket.com/albums/k596/TangoSauce/IMG00731-20120728-1805.jpg

[BCmJUnKie]

http://i1087.photobucket.com/albums/j468/Danger131/ADvaNcEZerO.jpg

[xcibes]

http://i23.photobucket.com/albums/b379/xcibes/20120729_095636.jpg

This is my new but temporary setup for home defense and such. It is a Colt 6920 lower with a B5 stock, MOE+ pistol grip and trigger guard. The upper is a Colt 653 with a Knight's Armament M4 RAS. Nowhere near as advanced as what you guys have but it should do the job if needed. The A1 upper will be replaced with an A3 upper (no M4 feedramps), a surefire light will be added as well as an Aimpoint, either a PRO or a T1 depending on the budget. The 14.5 inch barrel is 1/12 twist, and yes, the extended A2 FH is permanently attached. I chose 1/12 because this rifle is intended for short range and M193 ammo is cheaper than M855 and works just fine at short distances.

[jwperry]

http://i1117.photobucket.com/albums/k596/TangoSauce/IMG00731-20120728-1805.jpg

What color is the RH rifle? I'm curious if it is Larue UDE or Magpul FG.

[hkhunter]

That's a great picture man

beautiful pic bro! how's that rail treating you? I'm looking forward to seeing your install video on yutube.

[offroader1006]

http://oldsouthoffroad.com/ar3/2011-12-15_11-11-51_820sepi.jpg

http://oldsouthoffroad.com/ar3/2011-05-13_17-38-57_273web.jpg

http://oldsouthoffroad.com/stag/IMG_0954mod2%20copy.jpg

http://oldsouthoffroad.com/stag/IMG_0783web.jpg

http://oldsouthoffroad.com/Frank/2012-02-03_16-16-35_4241.jpg

http://oldsouthoffroad.com/Frank/2012-02-03_16-44-02_203.jpg

[TangoSauce]

What color is the RH rifle? I'm curious if it is Larue UDE or Magpul FG.

It's UDE. I think it looks a bit different in person than in pictures, but the FDE + UDE is a nice combo imo.

[skeebinz]

Noveske NSR 13.5

http://i45.tinypic.com/34h98pt.jpg

[Tootsies]

http://img195.imageshack.us/img195/4694/201207300242472.jpg

[TacticalTyler]

http://www.freeimagehosting.net/newuploads/sne36.jpg

Haley Mount is nice. Had to dremel the xtm panels a little bit to make them fit.

[Palmguy]

Been wanting one of these for about 5 years now, since I was an engineer at KAC. Finally made it happen :cool:

http://i134.photobucket.com/albums/q116/bridoyal/DSC_5624.jpg

[BCmJUnKie]

http://i1087.photobucket.com/albums/j468/Danger131/HoLDFasT.jpg
BCM 11.5", Troy TRX

[Warp]

Didn't you just post that a few days ago and a few pages back?

[BCmJUnKie]

Didn't you just post that a few days ago and a few pages back?

No. I posted one like it though.



http://i1087.photobucket.com/albums/j468/Danger131/FieLdSTRiP.jpg
BCM 11.5". 11" Troy TRX

[Warp]

I was going to say...how about a different position.

[BCmJUnKie]

Lol were you bored of the same position?

I'll try an switch it up.

[dth4lf]

http://i1087.photobucket.com/albums/j468/Danger131/HoLDFasT.jpg
BCM 11.5", Troy TRX


No. I posted one like it though.



http://i1087.photobucket.com/albums/j468/Danger131/FieLdSTRiP.jpg
BCM 11.5". 11" Troy TRX

:blink:

Is there a rifle somewhere in these pics???

I thought this was the AR picture thread.

[ASH556]

My New Hotness, still a virgin. Just got her set up.

Factory DD MK18
Aimpoint T1 on Larue Mount
KAC Taupe Front Sight
Matech Rear Sight
Surefire 6PX Tac in Gear Sector mount
Danger Close Handstop
LMT Sopmod stock
VTAC sling
Geissele SSA-E

http://i854.photobucket.com/albums/ab104/ASH556/IMG_9764.jpg
http://i854.photobucket.com/albums/ab104/ASH556/IMG_9765.jpg

[BCmJUnKie]

:blink:

Is there a rifle somewhere in these pics???

I thought this was the AR picture thread.

There sure is!

Remember Highlights magazine when we were kids?

Its like the hidden picture page! haha

[ALCOAR]

http://i888.photobucket.com/albums/ac81/trident1982/DSC07399-1.jpg

http://i888.photobucket.com/albums/ac81/trident1982/DSC07411-1.jpg

"Aimpoint Vision" revisited....In full 1080p HD w/ 1-25x zoom (https://www.youtube.com/watch?v=G6E7vBXhf3Q)

[Buckshot Barry]

I think this was taken in Israel

http://www.mindspring.com/~buckshotbarry/image.jpg

[Warp]

And there are two in the picture at that.

[Kilo 1-1]

Just retired my old CTR stock for the SOPMOD stock.

http://img193.imageshack.us/img193/1176/p1030966y.jpg

Damn, it's tight, but it's solid and I love that cheek wield.

http://img525.imageshack.us/img525/3994/p1030967c.jpg

[skorcher247]

PSA 16" Midlength Dissipator upper
BCM Bolt Carrier Group
BCM gunfighter mod 4 charging handle
Rock River Arms Lower
PSA lower build kit (Not a bad stock trigger at all)
Magpul furniture, accessories, and rear sight.
Eotech 512
$1362 total spent

http://i24.photobucket.com/albums/c22/skorcher247/setjaet.jpg
http://i24.photobucket.com/albums/c22/skorcher247/photo1.jpg
http://i24.photobucket.com/albums/c22/skorcher247/aetjar.jpg

[accce]

13069

[Brian Brazier]

Added an Eotech XPS2-0

http://i158.photobucket.com/albums/t97/bbrazierkendo/DSCN0050.jpg

[irishhitman]

:blink:

Is there a rifle somewhere in these pics???

I thought this was the AR picture thread.

WOW!!!!!!

[dth4lf]

13069

Sweet rifle. I love that configuration.

[GeorgiaBoy]

http://farm9.staticflickr.com/8433/7693606282_66cac2e27a_b.jpg (http://www.flickr.com/photos/73307770@N04/7693606282/)

[irishhitman]

http://img854.imageshack.us/img854/7374/lmtsl.jpg (http://imageshack.us/photo/my-images/854/lmtsl.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[LowSpeed_HighDrag]

Glad to see you upgraded from the DPMS to the LMT's there Irish. :D

[irishhitman]

Glad to see you upgraded from the DPMS to the LMT's there Irish. :D

I am not a hater.
have had about all of em. Not a big DPMS fan!

[ICANHITHIMMAN]

I think this was taken in Israel

http://www.mindspring.com/~buckshotbarry/image.jpg

Sexy to say the least

[TOMTOM]

http://i737.photobucket.com/albums/xx14/TD236/IMG_0648.jpg

[ssracer]

http://farm8.staticflickr.com/7246/7688974672_cb943a333a_b.jpg

[MidwestRookie]

BCM and Ed Brown. A match made in heaven..:)

http://i855.photobucket.com/albums/ab114/futuristichandgun/bcm1-1.jpg

[Pirate EC]

http://i1066.photobucket.com/albums/u402/PirateEC/SeansUpper005.jpg

[Mate]

Ash, that MK18 is perfection.

[Split66]

http://i600.photobucket.com/albums/tt86/splittiebus66/IMG_1793.jpg





http://i600.photobucket.com/albums/tt86/splittiebus66/IMG_1787.jpg

[fail wagon]

BCM and Ed Brown. A match made in heaven..:)

http://i855.photobucket.com/albums/ab114/futuristichandgun/bcm1-1.jpg

Love that 1911 trigger. What brand?

[MidwestRookie]

Thanks..it's an SVI trigger. Brownells carries them or you can order direct from SVI's online store.

[ASH556]

Ash, that MK18 is perfection.

Thanks man! Here's some more eye candy for you.

http://i854.photobucket.com/albums/ab104/ASH556/IMG_9780.jpg

[dth4lf]

Thanks man! Here's some more eye candy for you.

http://i854.photobucket.com/albums/ab104/ASH556/IMG_9780.jpg


I agree, bad ass rifle. Got any pics up under ARs in action?

[BCmJUnKie]

I agree, bad ass rifle. Got any pics up under ARs in action?

I dont think he has any rounds through it yet

[ASH556]

I dont think he has any rounds through it yet

I put about 40 through it last night at the local 25yd indoor range just to confirm function and get the sights on paper. No pics, though...small, cramped, and poorly lit. Couldn't hardly get zeroed for all the kids crowding around to see what all the blast was about!:D

pic thread, big brother:

http://i854.photobucket.com/albums/ab104/ASH556/IMG_9751.jpg

[Warp]

Thanks man! Here's some more eye candy for you.

http://i854.photobucket.com/albums/ab104/ASH556/IMG_9780.jpg

So how does the pistol handle with all that weight out front?

[ASH556]

So how does the pistol handle with all that weight out front?

Not sure what you mean. That's a handheld light. It's not attached to the pistol. The silencer doesn't weigh that much. It does help keep it a little flatter under recoil, but it's not overly muzzle heavy.

Pic Thread:

http://i854.photobucket.com/albums/ab104/ASH556/IMG_9769.jpg

[Warp]

Okay, I get it. At first look I was thinking "....WTF?" regarding that light.

[GeorgiaBoy]

http://farm9.staticflickr.com/8012/7701267274_dd031411ce_b.jpg

[Dsully]

Just finished building this one from the ground up today. I am going to replace the lower with a BCM when it arrives. Haven't shot it yet but Saturday I plan to
http://www.walkingheavy.com/arbuild/7.jpg

[irishhitman]

Just finished building this one from the ground up today. I am going to replace the lower with a BCM when it arrives. Haven't shot it yet but Saturday I plan to
http://www.walkingheavy.com/arbuild/7.jpg

I like the stock!!!!

[Dsully]

I like the stock!!!!

Thanks. It's a Magpul ACS

[Kiwi]

Just finished building this one from the ground up today. I am going to replace the lower with a BCM when it arrives. Haven't shot it yet but Saturday I plan to
http://www.walkingheavy.com/arbuild/7.jpg

What about the scope, how you find it? is it the solution for CQB to mid range?

thx

[TRUST8383]

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/DDM4/bd8a6920.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/DDM4/c4347b59.jpg

[Dsully]

What about the scope, how you find it? is it the solution for CQB to mid range?

thx

I bought the leupold HAMR awhile ago for a build that has yet to come in from Wilson Combat. I decided to go a different route with the optics on that one so I had this optic lying around. It's a 4x24mm fixed power with a reflex sight. It's supposed to be a contender with the ACOG and reflex but I haven't been able put it to the test yet. Saturday, I will be testing it but the reviews have been good. I'll post results soon.

[Casull]

TRUST8383, nice photos for sure.

[munch520]

http://i163.photobucket.com/albums/t294/myersma2/SBR/9657dbd8.jpg

[accce]

13106

[ZoneOne]

13106

Nice family you have there. Especially the P7.

[accce]

Nice family you have there. Especially the P7.

The P7 is a blast to shoot (no pun intended)

[andrewj]

http://i493.photobucket.com/albums/rr294/andrewjarvi28/DSCN0729.jpg

[Edward78]

Nice looking rifles guys

[jake1199]

Here is a pic of my new LWRC M6A2 10.5" SBR. This is my first piston AR and I am sure I will have more questions as I become familiar with the piston platform.
I am looking at the SWR Specwar to handle suppressor duties.

[MidwestRookie]

[ Burris MTAC / LaRue SPR-E ]

http://i855.photobucket.com/albums/ab114/futuristichandgun/mtac2-1.jpg

[GUNSLINGER733]

My middy and new xps2:)
http://i1125.photobucket.com/albums/l591/grappler4x4/bb7de651.jpg

[KCBRUIN]

http://img.tapatalk.com/ae3a84b0-d1c2-5af8.jpg
The Centurion rail on my BCM Middy in between mags at the range.

[ALCOAR]

http://i888.photobucket.com/albums/ac81/trident1982/DSC07423-1.jpg

[jwfuhrman]

http://i888.photobucket.com/albums/ac81/trident1982/DSC07423-1.jpg

you should start shooting 3gun, that would make a excellent choice

[ALCOAR]

What would I do for the two other guns Jon? :p


beautiful pic bro! how's that rail treating you? I'm looking forward to seeing your install video on yutube.

Thanks :)

I'm really liking them thus far, just finished the install video if you wanna check it out.


Geissele SMR rail install guide... (http://www.youtube.com/watch?v=6mfBZ8BVfhw)

[jaxman7]

http://farm9.staticflickr.com/8012/7701267274_dd031411ce_b.jpg

Thanks for the new screensaver. ;)
Nice man!

-Jax

[BCmJUnKie]

http://i1087.photobucket.com/albums/j468/Danger131/SoUL.jpg

[TOMTOM]

http://i737.photobucket.com/albums/xx14/TD236/IMG_1225-1.jpg

[jwfuhrman]

What would I do for the two other guns Jon? :p


ummmmmmmm, throw shot shells? you got a pistol of some kind dont ya? ;-)

[Medic218]

My first build that I just finished last week.

Lower
Spike's Tactical Stripped Lower
Palmetto State Armory Lower Parts Kit w/o Fire Control Group
ARFX Skeleton Stock
AR15 A2 Rifle Stock Completion Kit
MAGPUL MIAD Pistol Grip
Spike's Tactical Billet Trigger Guard
Geissele SSA-E

Upper
AR 15 Performance 16" 6.8 - 4150 CMV Scout Profile Barrel
VLTOR MUR Upper Receiver
ITS Extreme Duty NiB Bolt Carrier Group
5X4 Compensator
Samson Evolution Free Float Tube 11"
BCM Gun Fighter MOD 4(Med) Charging Handle
VLTOR Low Profile Gas Block
Mid-Length Gas Tube

http://i53.photobucket.com/albums/g50/usaf_ff81/68-1.jpg

http://i53.photobucket.com/albums/g50/usaf_ff81/68-2.jpg

[sadmin]

These are comfy.
13125

Just finished for a friend, he just sent me a picture and 2 grand. Not my style but handles well.

13126

[BCmJUnKie]

ummmmmmmm, throw shot shells? you got a pistol of some kind dont ya? ;-)

Hell ya he does!!


A grey USP if I'm not mistaken




Pic:

http://i1087.photobucket.com/albums/j468/Danger131/AcTioNBanGBanG-1.jpg
BCM 11.5", Troy TRX, Battlecomp.
BCM 16" M4, 10" Centurion

[ALCOAR]

Hehe...BCM knows me and my Urban Ghey....I mean Urban Grey USPc all to well:p

http://i888.photobucket.com/albums/ac81/trident1982/DSC07500-1.jpg

[Psybain]

DDM4V1
Just picked it up yesterday morning.

http://i1092.photobucket.com/albums/i416/psybain/DDM4V1.jpg

[jaxman7]

Just put an NSR 13.5 on this build and I am a convert.

http://i907.photobucket.com/albums/ac279/jaxman7/IMG_20120805_200906.jpg

[Casull]

Jaxman7, can we see more photos of your rifle? :D I like what I see.

[jaxman7]

Casull,

I appreciate the comment. Will have some more pics Tuesday. That's my next day off. I will say that I have been quite hesitant to switch to a tube style handguard from a traditional railed one but the NSR is absolutely fabulous and I dont like exaggeration in anything but I really am impressed with this setup.

-Jax

[deadly0311]

Knights Armament SR15 Mod 1 with the barrel shortened to 14.5 and the MB556K pinned.

http://i70.photobucket.com/albums/i119/allaboutbob/SR15.jpg

[jaxman7]

Knights Armament SR15 Mod 1 with the barrel shortened to 14.5 and the MB556K pinned.

http://i70.photobucket.com/albums/i119/allaboutbob/SR15.jpg

That's gotta be a sweet shooting rifle with the KAC gas system, SF brake, and Geiselle trigger.

I've got to move to Alabama. There seems to be ALOT more shooters with a similar mindset towards shooting and gear than south central Mississippi. I swear I live in a 'tactical black hole'!

-Jax

[dudshep31]

I've got to move to Alabama. There seems to be ALOT more shooters with a similar mindset towards shooting and gear than south central Mississippi. I swear I live in a 'tactical black hole'!

-Jax[/QUOTE]

I feel your pain Jax.

pic thread

http://i1139.photobucket.com/albums/n557/dudshep31/IMG_0062.jpg

[Quiet-Matt]

Jaxman, I know the feeling.

https://lh4.googleusercontent.com/-JO2_NUvsL3M/UCBb92dEDcI/AAAAAAAAJrM/JDmUwjr-6KE/s816/20120806_194442.jpg?gl=US

[shadow93]

That's gotta be a sweet shooting rifle with the KAC gas system, SF brake, and Geiselle trigger.

I've got to move to Alabama. There seems to be ALOT more shooters with a similar mindset towards shooting and gear than south central Mississippi. I swear I live in a 'tactical black hole'!

-Jax

You want to talk about a "tactical black hole" try living in Illinois! I'm lucky I can even own an AR. Their aren't many options for me to even shoot it and none for me to go out and shoot it that aren't off a bench (that I know of around me).:eek:

Will get pictures of my new DD up once I get my camera (AKA phone) around the gun on a day off.

[deadly0311]

Jax man come on....we would love to have you...in essence of the picture thread, here is another but in 308

http://i70.photobucket.com/albums/i119/allaboutbob/SR25ECC2.jpg

[Casull]

Wow... that deserves a reply. Beautiful!! :eek:

Picture thread:
http://25.media.tumblr.com/tumblr_m7l72wWjTw1qa8t8jo1_500.png
The lower is a TM-15 Gen 1

[jaxman7]

Shadow93,

In lieu of your comment and situation I guess I shouldn't complain! I hate that for ya.

To all thats commented on the black hole its ironic about guns in the South. Everyone I know is pro-gun and unfortunately just about everyone I know shoots probably less than a hundred rounds a year. Even thats from a bench with their deer rifle or standing static with their cheap 1911 with a teacup and saucer grip.

But I am lucky to be living in a place where there is an overwhelming pro-gun attitude so that's a good start.


http://i907.photobucket.com/albums/ac279/jaxman7/2012-08-07_08-18-32_686.jpg

http://i907.photobucket.com/albums/ac279/jaxman7/2012-08-07_08-19-55_81.jpg

http://i907.photobucket.com/albums/ac279/jaxman7/2012-08-07_08-21-15_136.jpg

[Psybain]

To all thats commented on the black hole its ironic about guns in the South. Everyone I know is pro-gun and unfortunately just about everyone I know shoots probably less than a hundred rounds a year. Even thats from a bench with their deer rifle or standing static with their cheap 1911 with a teacup and saucer grip.
100 rounds a year? lol, thats about how many rounds I shoot with my glock each range trip. Sadly, I have to travel about 2 hours if I want to do any dynamic shooting.

[TRUST8383]

100 rounds a year would drive me insane! Come on down to florida! You guys are welcome to shoot to your hearts content at the FOP range with me. :D

Jaxman- did you have a hard time installing the NSR handstops? ? Mine was stubborn going in.

pic thread.

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/KSG/4263622c.jpg

[deadly0311]

Heck I probably shoot a couple hundred rounds every 2 days

[jaxman7]

Yeh the handstop was pretty difficult to install. Harder than any other panel. I think it might be because the handstop portion itself adds rigidity to the panel and there has to be a small amount of flex in the panel to install it. I do like them though.

The handstop in front of the foregrip is not used for a handstop. This is something I discovered while using a Magpul AFG. My support hand index finger wraps around the front of the handstop and it gives me a little more leverage to pull the gun towards my shoulder.

-Jax
http://i907.photobucket.com/albums/ac279/jaxman7/2012-08-07_10-06-29_393.jpg

http://i907.photobucket.com/albums/ac279/jaxman7/2012-08-07_10-07-22_290.jpg

[Bizzarolibe]

http://i40.photobucket.com/albums/e236/Snarky15/AR156.jpg

http://i40.photobucket.com/albums/e236/Snarky15/AR159.jpg

Spikes Tactical upper/PSA lower (red/black)

Rainier Arms upper/PSA & CMMG lower (black only)

[jwperry]

Just finished up putting together my spare parts bin and a new upper receiver(only the receiver) and MI fixed rear sight as a "shooter's kit" for my cousin. Hopefully now I can get a range partner with similar mindset and goals..

http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/090.jpg
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/091.jpg
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/092.jpg
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/093.jpg

[NeoNeanderthal]

Just finished up putting together my spare parts bin and a new upper receiver(only the receiver) and MI fixed rear sight as a "shooter's kit" for my cousin. Hopefully now I can get a range partner with similar mindset and goals..

http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/090.jpg
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/091.jpg
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/092.jpg
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/093.jpg


Digging the R1 Optic man! I should gotten 3 of them instead of just of just 1.

[Tootsies]

http://img827.imageshack.us/img827/4073/201208061533131.jpg

[deviljon]

Hehe...BCM knows me and my Urban Ghey....I mean Urban Grey USPc all to well:p

http://i888.photobucket.com/albums/ac81/trident1982/DSC07500-1.jpg

What rail is that? That's a beautiful rig.

http://i53.photobucket.com/albums/g71/j0ny4ng/20120719_062201.jpg

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[BCmJUnKie]

http://i53.photobucket.com/albums/g71/j0ny4ng/20120719_062201.jpg

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

I like this

[ALCOAR]

deviljon...I appreciate the kind words, and the rail is the new Geissele SMR 13".

[jwfuhrman]

deviljon...I appreciate the kind words, and the rail is the new Geissele SMR 13".

they by any chance gonna have a 15in version out? I'd swap my 15in Troy out for a Geissele one any day if I could get a 15in(giggidy..... lol)

[sadmin]

they by any chance gonna have a 15in version out? I'd swap my 15in Troy out for a Geissele one any day if I could get a 15in(giggidy..... lol)

http://www.rainierarms.com/?page=shop/detail&product_id=3224

[BCmJUnKie]

http://i1087.photobucket.com/albums/j468/Danger131/CaLm.jpg

[ddnguyen9]

http://i95.photobucket.com/albums/l155/davidnguyen1151/Guns/404b25a5.jpg

[Fire_Medic]

Added some stuff and changed the stock. Added a Magpul UBR in place of the ACS, and got my T1/Larue Mount, and the M600C on Gear sector mount on the rifle. It balances perfectly and the UBR feels rock solid and more user friendly. (cheek weld)

http://i325.photobucket.com/albums/k366/ffgabe/Toys/IMG_5328.jpg

[ALCOAR]

they by any chance gonna have a 15in version out? I'd swap my 15in Troy out for a Geissele one any day if I could get a 15in(giggidy..... lol)

They do indeed make a 15" SMR model....here it is on a SPR build.

http://i888.photobucket.com/albums/ac81/trident1982/DSC07024-1.jpg

[jwfuhrman]

They do indeed make a 15" SMR model....here it is on a SPR build.]

Dammit..... Why must you show me this l

http://i6.photobucket.com/albums/y201/paintballaddict/77ec4a0b.jpg

[CoryCop25]

Added some stuff and changed the stock. Added a Magpul UBR in place of the ACS, and got my T1/Larue Mount, and the M600C on Gear sector mount on the rifle. It balances perfectly and the UBR feels rock solid and more user friendly. (cheek weld)



Looks great!

[Fire_Medic]

Looks great!

Thanks brother, thanks again for the heads up on gear sector.

[newyork]

Damn Trident! Killer!

[TangoSauce]

Speaking of the 15'' Geissele, Wes had this up on his FB page. FYI

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/483966_333168016769206_945332374_n.jpg

[midSCarolina]

LMT 14.5" Upper
LMT Lower w/ LMT 2-stage and LMT SOPMOD
Daniel Defense RIS II MK18
Triji Acog TA31RCO-M4 w/ LaRue Mount
VLTOR VC-1

http://i1115.photobucket.com/albums/k558/thornejc23/Defender2.jpg
http://i1115.photobucket.com/albums/k558/thornejc23/Defender3.jpg
http://i1115.photobucket.com/albums/k558/thornejc23/IMG_2221.png

[newyork]

Wanted to try out the BCM Mod 0. Installed them today. Trying them in a match on Sunday and at Falla in 2 weeks.

http://i605.photobucket.com/albums/tt134/rslamiroult/a33f5152.jpg

[dth4lf]

Speaking of the 15'' Geissele, Wes had this up on his FB page. FYI

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/483966_333168016769206_945332374_n.jpg

Simple and beautiful. I love it.

[SKULL1]

http://farm8.staticflickr.com/7249/7606932970_1920916f73_b.jpg

[E-man930]

http://img528.imageshack.us/img528/1879/img3185ez.jpg

[Split66]

http://i600.photobucket.com/albums/tt86/splittiebus66/IMG_1818.jpg

http://i600.photobucket.com/albums/tt86/splittiebus66/IMG_1812.jpg

Warpony

[buddyhoohaw]

FDE anodized 6920 w/ cerakoted barrel

http://i5.photobucket.com/albums/y198/buddyhoohaw/6920/FDE-6920-02.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/6920/FDE-6920-01.jpg

Cheers

[Pappabear]

FDE anodized 6920 w/ cerakoted barrel

http://i5.photobucket.com/albums/y198/buddyhoohaw/6920/FDE-6920-02.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/6920/FDE-6920-01.jpg

Cheers

Very cool

[jr0xas]

Great to see you posting photos again buddyhoohaw! That Glock is SICK!!

[buddyhoohaw]

Great to see you posting photos again buddyhoohaw! That Glock is SICK!!

Thanks man! My great friend StephenH is the cerakote master.

Cheers

[Zero Signal]

Hehe...BCM knows me and my Urban Ghey....I mean Urban Grey USPc all to well:p

http://i888.photobucket.com/albums/ac81/trident1982/DSC07500-1.jpg

Anybody know what hand stop this rifle has?

[Kilo 1-1]

Anybody know what hand stop this rifle has?

KAC
http://www.knightarmco.com/shop/index.php?main_page=product_info&products_id=1
-----
Pic thread
http://img824.imageshack.us/img824/2676/angleju.jpg

[buckjay]

Anybody know what hand stop this rifle has?

Thats a KAC hand stop.

[opdsgt]

I run a Colt on duty, but I do enjoy my DDM4V2 w/ACOG for distance work:

http://farm9.staticflickr.com/8003/7708043536_f6553fe168_c.jpg (http://www.flickr.com/photos/59854797@N07/7708043536/)

Just about to break a shot on the 500 yard gong:

http://farm8.staticflickr.com/7114/7708043294_7811b4cd29_z.jpg (http://www.flickr.com/photos/59854797@N07/7708043294/)

[jaxman7]

I run a Colt on duty, but I do enjoy my DDM4V2 w/ACOG for distance work:

http://farm9.staticflickr.com/8003/7708043536_f6553fe168_c.jpg (http://www.flickr.com/photos/59854797@N07/7708043536/)

Just about to break a shot on the 500 yard gong:

http://farm8.staticflickr.com/7114/7708043294_7811b4cd29_z.jpg (http://www.flickr.com/photos/59854797@N07/7708043294/)

That is a sweet range man.........oh and nice rifle too! ;)

-Jax

[opdsgt]

Thanks, Jax. :cool:

[jaxman7]

Thanks, Jax. :cool:

You're welcome.

-Jax

[BCmJUnKie]

http://i1087.photobucket.com/albums/j468/Danger131/GeTShaWTy.jpg
BCM 11.5". 11"Troy TRX

[NeoGeo630]

https://lh5.googleusercontent.com/-sQJ1i505xsk/UCgSbnmudoI/AAAAAAAABNI/oY9pB1hKPQc/s912/BCM_01_Updated.JPG
BCM 14.5" w/ Pinned Battle Comp 1.5, DD OmegaX 9.0, Aimpoint T1 in LaRue mount.
Have since gotten rid of the hard chrome bcg and is now back to running a BCM standard bcg.

https://lh6.googleusercontent.com/-s0dDXsXIWRQ/UCbPGmYxWnI/AAAAAAAABMM/srcR7hyi9v0/s912/BCM_02.JPG
BCM 14.5" Lightweight BFH w/ Pinned Battle Comp 1.5, DD OmegaX 12.0, Aimpoint CompM3 in LaRue Cantilever mount, Surefire M600A in LaRue mount.

[xdm40Rajuy]

http://img.tapatalk.com/46c1d02a-dac6-d44e.jpg

Sent from my DROID RAZR using Tapatalk 2

[SKULL1]

http://farm9.staticflickr.com/8437/7763322382_cd61b13684_b.jpg

[ridgerunner70]

13194
This is not my AR but would like to know what kind of hand rail that is..

[deadly0311]

PRI carbon fiber rail

[justin_247]

13194
This is not my AR but would like to know what kind of hand rail that is..

Looks like one from Precision Reflex.

[Koshinn]

https://lh5.googleusercontent.com/-KAEsBXWGp8o/T66ZVKGqneI/AAAAAAAABMc/pUHjuFQ2a6o/s912/BCM01.JPG


Is your rear sight on backwards? Also,isn't having your optic half on your rail bad?

[newyork]

http://i605.photobucket.com/albums/tt134/rslamiroult/db9ecc9f.jpg

[NeoGeo630]

Is your rear sight on backwards? Also,isn't having your optic half on your rail bad?

Yes, in that picture my rear sight is on backwards. It's an old pic but the only one I had of that rifle. I really should take a new picture.

I've never heard having the optic mount half on rail and half on receiver being bad. Is it because of possible movement between the two? I guess ideally if the rail is a good one and locks up solid, there should never be movement? Any info on this would be appreciated.

[AlphaKoncepts]

This one is a "Chicago legal" AR15. Chicago has rather strict gun registration ordinance. The person whom I built this for and I were joking it may be the first AR15 registered in the City of Chicago. Boy oh boy did he have to jump through alot of hoops, even though this complies with the Chicago Ordinance word for word.

[AlphaKoncepts]

Yes, in that picture my rear sight is on backwards. It's an old pic but the only one I had of that rifle. I really should take a new picture.

I've never heard having the optic mount half on rail and half on receiver being bad. Is it because of possible movement between the two? I guess ideally if the rail is a good one and locks up solid, there should never be movement? Any info on this would be appreciated.

If it's really a concern, give it a day at the range and give it hell and see if it keeps zero.

If not, or if it is still a concern, you have 2 options: a cantilevered scope mount or a monolithic upper receiver with integrated rail such as the one made by Lewis Machine Tool in IL.

[NeoGeo630]

If it's really a concern, give it a day at the range and give it hell and see if it keeps zero.

If not, or if it is still a concern, you have 2 options: a cantilevered scope mount or a monolithic upper receiver with integrated rail such as the one made by Lewis Machine Tool in IL.

Just took a new pic and replaced the old one in my post.

I've ran the FDE one through two carbine course and shot ~850 rounds thru it. I haven't had any issues with the T1 going off zero yet.

The other build is a newer one so I haven't given it a real test as of yet. Hopefully sometime this fall, I will run it through a training course.

[HeavyDuty]

This one is a "Chicago legal" AR15. Chicago has rather strict gun registration ordinance. The person whom I built this for and I were joking it may be the first AR15 registered in the City of Chicago. Boy oh boy did he have to jump through alot of hoops, even though this complies with the Chicago Ordinance word for word.

Post a pic of it on Rahm's FB page. It'll make his head explode.

[Warp]

Just after a string of fire

http://i54.photobucket.com/albums/g105/austin3161324/20120811_161210.jpg

[mvician]

http://i48.photobucket.com/albums/f240/mvician/KACbuild/P1160863.jpg

[arjohnson]

http://img.photobucket.com/albums/v441/arjohnson/106_1301.jpg

http://img.photobucket.com/albums/v441/arjohnson/106_1302.jpg

http://img.photobucket.com/albums/v441/arjohnson/106_1305.jpg

http://img.photobucket.com/albums/v441/arjohnson/106_1303.jpg

[azairman86]

Here is my Spikes Tactical LE 15 with magpul furnature dipped in ATACS.

[tgace]

My BCM 16" mid-length upper on my newly assembled Rainier Arms lower.

Sent from my DROIDX using Tapatalk

[dohc97]

http://i2.photobucket.com/albums/y11/dohc97/My%20handguns/JUN_5061.jpg

[Palmguy]

http://i134.photobucket.com/albums/q116/bridoyal/DSC_5741.jpg

[CA_Shooter]

This one is a "Chicago legal" AR15. Chicago has rather strict gun registration ordinance. The person whom I built this for and I were joking it may be the first AR15 registered in the City of Chicago. Boy oh boy did he have to jump through alot of hoops, even though this complies with the Chicago Ordinance word for word.

Wow, looks just like a "featureless" AR here in CA. I know other states/cities had various AW restrictions but thought nothing was as bad as CA for semi-auto rifles (outside of outright bans).

[slowkota]

Just after a string of fire

http://i54.photobucket.com/albums/g105/austin3161324/20120811_161210.jpg

Now theres a range set-up I've never seen before! Whats going on there? Is it some sort of "No sky" range set-up?

[Warp]

Now theres a range set-up I've never seen before! Whats going on there? Is it some sort of "No sky" range set-up?

I don't really know why they have those up there. Not my range, only went there this weekend for an event and probably won't be back (just too far away).

I can only imagine they believe it is adequate to stop rounds that get fired up there by accident thus avoiding bullets that pass over the berm.

[Roecar]

My first AR, a DD M4V5. I definitely feels more comfortable than my AK. I can't wait to run it through classes.

http://i3.photobucket.com/albums/y80/Roecar/Roecar%20Tactical%20Gear/DDM4V5.jpg
http://i3.photobucket.com/albums/y80/Roecar/Roecar%20Tactical%20Gear/DDM4V52.jpg

[BCmJUnKie]

Third times the charm??? lol

Vid: http://youtu.be/2TlgQddG_zU



http://i1087.photobucket.com/albums/j468/Danger131/GeTShaWTy.jpg

[BCmJUnKie]

http://i1087.photobucket.com/albums/j468/Danger131/Re-LoaDed.jpg

BCM 11.5". 11" Troy TRX. G17 Gen 4

[warner41]

My favorite so far. 14.5" BCM BFH on Spike's Lower, BCM BCG & Mod 4 CH. NY compliant.

http://i1269.photobucket.com/albums/jj582/warner41/BCM145.jpg

[OhThatGuy]

Sig 516 AR Pistol with CASV modded to fit...
http://i49.tinypic.com/v6njau.jpg
http://i47.tinypic.com/r8yy5e.jpg
http://i47.tinypic.com/504brq.jpg

[sgtbutt]

http://i1087.photobucket.com/albums/j468/Danger131/Re-LoaDed.jpg

BCM 11.5". 11" Troy TRX. G17 Gen 4

Fixed rear but folding front, Junkie, can you expand on this???? I've seen plenty of the op
posite with fixed front and folding rear but never this config.

Also, that looks like a DD A1.5, how do you like it?

[dram0512]

13235 m&p 15 sport, eotech 512, troy industries 7" carbine quadrail, afg angled foregrip, mbus rear sight, aero precision upper, magpul grip.

[CoryCop25]

http://i1014.photobucket.com/albums/af269/CoryCop25/M%2016/P1010549.jpg

http://i1014.photobucket.com/albums/af269/CoryCop25/M%2016/P1010550.jpg

[TOMTOM]

Traded the ACOG...went back to to an aimpoint. Comp M4s flavor this time...


http://i737.photobucket.com/albums/xx14/TD236/IMG_1252-1.jpg

[RWH24]

Newbie to M4 forum, not so new to the AR platform. I have cruised through the pics
ya'll have posted and I see works of art. Functioning Art.:cool:
Any way here is what I have:

Spikes Complete lower with NiB FCG
Magpul ACS OD Green stock

Upper is the AIM/Spikes Dissapator
Aimpoint PRO
Troy fixed rear sight.
BCM #4 charging handle
Magpul rails are on B/O.

http://pic20.picturetrail.com/VOL1321/4777050/23573249/402777197.jpg

Spike's Upper
Spike's NiB BCG
ARP 16" LW barrel Phantom MD
Troy TRX Extreme 13" Hand Guard
Spike's charging handle

http://pic20.picturetrail.com/VOL1321/4777050/24030281/401094465.jpg

Have not bought/built another lower yet for the AIM upper.
TheTroy TRX goes with the only lower I have.
http://pic20.picturetrail.com/VOL1321/4777050/24161870/403472372.jpg
http://pic20.picturetrail.com/VOL1321/4777050/24030281/403657908.jpg

[mig1nc]

http://i1014.photobucket.com/albums/af269/CoryCop25/M%2016/P1010549.jpg

http://i1014.photobucket.com/albums/af269/CoryCop25/M%2016/P1010550.jpg

Is that a French flag or Dutch flag you made out of rail panels?

:)

Just kidding.

[CoryCop25]

Is that a French flag or Dutch flag you made out of rail panels?

:)

Just kidding.

That's the third time today!!! Damnit!

The stars lead the way into battle.... Blue first! :D

[Penhall]

My first post, and my first AR :D

http://i229.photobucket.com/albums/ee216/jpenhall/Gunporn1.jpg

[BH321]

Fixed rear but folding front, Junkie, can you expand on this???? I've seen plenty of the op
posite with fixed front and folding rear but never this config.

Also, that looks like a DD A1.5, how do you like it?

Not BCmJUnKie, but for a lot of guys who have astigmatisms, the dot on an Aimpoint can look more like an oval than a circle. Having an absolute co-witness of the BUIS, the dot appears circular when you look through the rear, thus making it easier to aim for some people.

[Palmguy]

http://i134.photobucket.com/albums/q116/bridoyal/DSC_5789.jpg

[RSviper]

I know there are a lot of left handed AR shooters out there. I thought I'd start a thread discussing left handed AR parts and mods to make AR's more lefty friendly.

I will say that I am right handed, but have always shot left handed because I'm left eye dominate. I've been interested in some of the newer generation rifles like the SCAR or ACR because of their ambi controls, but recently with the availability of some good lefty parts, I feel that I have as much control now as any right handed shooter would.


I've added a troy mag release, ambi safety, and the new Rainier arms ambi charging handle.

Mag changes and locking the bolt back in failure situations is not nearly as awkward and is now much faster for me. The troy ambi release is probably the most used feature, allowing me to change mags the same as any right hander, cutting the step out where I'd have to hit the release with my right hand then insert my mag with my right hand. I like the ambi safety, but could get by using my trigger finger to operate it. If anything, I might look for a shorter lever on the left side the current safety lever does protrude out and rub on my trigger finger.

I'm just and average lefty shooter, no special training, but it's a great time to be a lefty AR shooter compared to even a few years ago.

Lefty's show us what you have or tell us about what it's been like for you shooting from the "other" side.

Here's a few pics of my setup.

http://i46.photobucket.com/albums/f145/RSViper/P1070335.jpg

http://i46.photobucket.com/albums/f145/RSViper/P1070336.jpg

http://i46.photobucket.com/albums/f145/RSViper/P1070337.jpg

[SteveL]

If anything, I might look for a shorter lever on the left side the current safety lever does protrude out and rub on my trigger finger.

For this particular issue I suggest looking at safeties from Battle Arms Development (http://battlearmsdevelopment.com/badass.php) (BAD). Their ambi safeties are top notch, and you can select your levers in multiple lengths, configurations, and even different colors. I particularly like their 45° model (the BAD ASS ST).

[VIP3R 237]

For this particular issue I suggest looking at safeties from Battler Arms Development (http://battlearmsdevelopment.com/badass.php) (BAD). Their ambi safeties are top notch, and you can select your levers in multiple lengths, configurations, and even different colors. I particularly like their 45° model (the BAD ASS ST).

I second this, a lefty the BAD-ASS has been the best so far.

[StevieJ309]

http://img62.imageshack.us/img62/3984/blockiix.jpg

[Guns-up.50]

Hell yeah a lefty thread, have no ambi controls but this is awesome. I am too used to running a right handed AR as a lefty

[seb5]

I learned AR's as a lefty shooting a standard rifle. For most situations it works fine, albeit a tad slower. Over the last few years I've standardized all of my carbines with ambi safeties and mag releases. as a lefty the bolt lock, release works better for us. So far I've never seen a reason to go with an ambi CH. If you reload by using the charging handle it might be beneficial but with the bolt release so perfectly positioned for lefties I almost always use it.

[ASH556]

Figured I'd throw up a Block II-ish pic before I dump the Eotech:

http://i854.photobucket.com/albums/ab104/ASH556/IMG_9817.jpg

[Wormydog1724]

Traded the ACOG...went back to to an aimpoint. Comp M4s flavor this time...


http://i737.photobucket.com/albums/xx14/TD236/IMG_1252-1.jpg

:cray: No love for the ACOG? :nono:

http://i416.photobucket.com/albums/pp247/wormydog1724/0fcee752.jpg

[RSviper]

I learned AR's as a lefty shooting a standard rifle. For most situations it works fine, albeit a tad slower. Over the last few years I've standardized all of my carbines with ambi safeties and mag releases. as a lefty the bolt lock, release works better for us. So far I've never seen a reason to go with an ambi CH. If you reload by using the charging handle it might be beneficial but with the bolt release so perfectly positioned for lefties I almost always use it.


The CH really isn't a must have. I liked the look of the new Rainier one, and in certain circumstances (double feeds) it's easier to grab the CH on the right side with my right hand while locking the bolt back with my trigger finger on my left. Any manipulation with the bolt release and CH is easier since I don't have to cross over to the left side to pull the CH back.

I also have the Knights Armament mag release on another lower I have, but I don't like it as much as the troy. Its larger and harder to press because of the way it's leveraged than the troy, plus it's not quite at the same location on the lower as the mag release on the right side of the rifle.

[Tango374]

As a lefty I've always extended all four fingers of my firing hand and hit the bolt release with my middle finger.
I tried to create my own extended bolt release with a cut down BAD lever with hopes of hitting it with just my trigger finger not having to extend all four fingers out.
In all honesty, I wouldn't call it a screaming success.
Kind of hard to explain but because I'm placing pressure on the release off to the side of pivoting point of the bolt release, every once in a while would cause the release to bind up. Not every time, but maybe one attempt out of 15, which was enough to ditch the idea.
I went back to the old ways of hitting the release with my middle finger but kept the cut down BAD on there because I do appreciate the extra real estate.

http://i43.photobucket.com/albums/e364/Tango374/Firearms/IMG_7386-1.jpg
http://i43.photobucket.com/albums/e364/Tango374/Firearms/IMG_7385.jpg

Not too long ago I did purchase the Troy mag release and have been very happy with it.

[BCmJUnKie]

Fixed rear but folding front, Junkie, can you expand on this???? I've seen plenty of the op
posite with fixed front and folding rear but never this config.

Also, that looks like a DD A1.5, how do you like it?

Sure thing buddy.

My logic is, If I need to make a long distance shot, I would be using the 12.5" over the 11.5".

That being said, I want my magnifier on the Kino, not the shorty. I couldnt mount it with the fixed rear.

Plus....the shorty is FAST. Its just a fast weapon to shoot. The fixed rear makes it that much better.

My grip is already at the end of the rail, if I need to deploy the sight (which would be never in a gunfight) Its not gonna exactly take a long time

[jb1911]

http://farm9.staticflickr.com/8289/7791855238_70518776e7_b.jpg

[BCmJUnKie]

http://i1087.photobucket.com/albums/j468/Danger131/DeaDCeNTeR.jpg

[ASH556]

Got the new Magpul coupler. 2 mags full of Gold Dot 55gr 5.56 for HD on the gun:)

http://i854.photobucket.com/albums/ab104/ASH556/IMG_9826.jpg

[xbmxracerx]

FOP Range with a few Officers......

http://i17.photobucket.com/albums/b66/emufreak1/C74208F2-55BE-4C76-9E47-D5F5A8A7AF7F-5183-000004099CD8B5FA.jpg

[Wormydog1724]

http://i416.photobucket.com/albums/pp247/wormydog1724/b6ad91f7.jpg

[28003]

Last time pics in its current config.....its about to undergo a semi-permanent change/evolution
http://i240.photobucket.com/albums/ff210/28003/CameraFun-2012-08-16193248.jpg

[Stickman]

Pic is from Military Times, and isn't one of mine, however I thought it worth sharing.

http://militarytimes.com/blogs/gearscout/

http://militarytimes.com/blogs/gearscout/files/2012/08/578870_3683202163310_866776323_n.jpg

[JC0352]

^ I couldn't agree more!

[GeorgiaBoy]

http://farm9.staticflickr.com/8283/7701262520_381d9e6258_b.jpg (http://www.flickr.com/photos/73307770@N04/7701262520/)

[newyork]

http://i416.photobucket.com/albums/pp247/wormydog1724/b6ad91f7.jpg

Sick pic Wormy!

[BCmJUnKie]

http://i1087.photobucket.com/albums/j468/Danger131/Bug-GeD.jpg

[jonconsiglio]

Aervoe on my BCM 14.5". Borrowed Munch520's Comp M2 since a bag of my gear was swiped, including both of my T1's and 3x.

http://i534.photobucket.com/albums/ee343/jonconsiglio/AF6903BE-F18D-4B01-A9FE-B1D6AE249A12-323-00000084BD453E74-1.jpg

[BCmJUnKie]

Aervoe on my BCM 14.5". Borrowed Munch520's Comp M2 since a bag of my gear was swiped, including both of my T1's and 3x.

Are you kidding???

Find the worthless **** and chop his hands off.

I HATE a thief.

[Wormydog1724]

http://i416.photobucket.com/albums/pp247/wormydog1724/748d398c.jpg

[Brian Brazier]

Are you kidding???

Find the worthless **** and chop his hands off.

I HATE a thief.

One punishment the Saudi's got right

[jonconsiglio]

Are you kidding???

Find the worthless **** and chop his hands off.

I HATE a thief.

Believe me, I do too bro. Especially one running around with my 10.5" upper, two Surefire, two T1's, 3x Aimpoint, a couple Bad-ASS selectors, etc.

Thanks to Munch520 for the loaner M2 while I save up for at least a used T1. Sometimes things just suck!

I can only pray that I see someone with any of my stuff.

[rebel123]

My new Colt 6920 MOE with Aimpoint Pro...

[nimdabew]

Are you kidding???

Find the worthless **** and chop his hands off.

I HATE a thief.

I wish I could find the senseless ass hat that stole my range bag out of my car that had about $2000 worth of shooting gear in it. Thank god for renters insurance though.

[fallenromeo]

Believe me, I do too bro. Especially one running around with my 10.5" upper, two Surefire, two T1's, 3x Aimpoint, a couple Bad-ASS selectors, etc.

Thanks to Munch520 for the loaner M2 while I save up for at least a used T1. Sometimes things just suck!

I can only pray that I see someone with any of my stuff.

That sucks bro. I am really sorry to hear about that.

[BCmJUnKie]

Believe me, I do too bro. Especially one running around with my 10.5" upper, two Surefire, two T1's, 3x Aimpoint, a couple Bad-ASS selectors, etc.

Thanks to Munch520 for the loaner M2 while I save up for at least a used T1. Sometimes things just suck!

I can only pray that I see someone with any of my stuff.

Sorry man. Thats terrible. Someones hard earned money just taken by a piece of shit.

Thats awesome you have a friend like Munch, hes a friend on my Facebook. Hes a good guy. I would help you out if you lived closer.

I wish I could be around when that guy gets slapped in the face with Karmas big dick.

[Palmguy]

http://i134.photobucket.com/albums/q116/bridoyal/DSC_5835.jpg

[nof555]

Was:
http://i18.photobucket.com/albums/b117/noob412/252453_10150287054862952_7242889_n.jpg

Now:
http://i18.photobucket.com/albums/b117/noob412/DSCF1434.jpg

[jonconsiglio]

That sucks bro. I am really sorry to hear about that.

Thanks man, I appreciate it



Sorry man. Thats terrible. Someones hard earned money just taken by a piece of shit.

Thats awesome you have a friend like Munch, hes a friend on my Facebook. Hes a good guy. I would help you out if you lived closer.

I wish I could be around when that guy gets slapped in the face with Karmas big dick.

Munch is a good dude. He's in Ohio, but is coming to South Texas in a couple weeks.

As for the mother****er that stole my bag.... Well, I hope I'm the one that gets to cock-slap him! And I just don't care how bad that sounds, either.

[DeAdeYE15]

Thanks man, I appreciate it




Munch is a good dude. He's in Ohio, but is coming to South Texas in a couple weeks.

As for the mother****er that stole my bag.... Well, I hope I'm the one that gets to cock-slap him! And I just don't care how bad that sounds, either.

That makes me sick to my stomach just hearing about losing that much $ worth of gear. Now you get to suffer through the paranoia that comes with knowing a thief is sharing your range. Sorry to hear this, I hope the guy gets whats coming to him.

[sgtbutt]

I wish I could be around when that guy gets slapped in the face with Karmas big dick.

Funny thing is the dude will probably use the 10.5 upper on a non registered lower and be slapped with a felony once caught.

Jon, be watching the news papers for that, sorry for your loss bro.

[GUNSLINGER733]

Hope you find the asshole who stole your stuff bro. Here's my bcm 14.5 bfh with ris II http://i1125.photobucket.com/albums/l591/grappler4x4/B16B3BCC-9EA5-4F26-ABC3-523AEF813A83-1604-00000698E92E8E2F.jpg
http://i1125.photobucket.com/albums/l591/grappler4x4/7F27AEB5-99B7-4E81-AAB8-35606AF1FC3D-1604-00000698E2B777EB.jpg

[Mr. Mutt]

I like your style.


http://i1125.photobucket.com/albums/l591/grappler4x4/7F27AEB5-99B7-4E81-AAB8-35606AF1FC3D-1604-00000698E2B777EB.jpg

http://img854.imageshack.us/img854/4852/arfence.jpg

;)

[Palmguy]

http://i134.photobucket.com/albums/q116/bridoyal/DSC_5868.jpg

[TOMTOM]

:cray: No love for the ACOG? :nono:

I had a feeling you'd be dissapointed, lol.


http://i737.photobucket.com/albums/xx14/TD236/IMG_1253-1.jpg

[opdsgt]

I wish I could find the senseless ass hat that stole my range bag out of my car that had about $2000 worth of shooting gear in it. Thank god for renters insurance though.No flame, just a question: was your vehicle in your apartment parking lot when the theft occurred.

Food for thought: we see more guns make their way onto the street from theft from motor vehicles than we do residential burglaries. I encourage folks to invest in a vault if they have to leave their kit inside an unattended car.

I hope the authorities can clear your case with an arrest and return your property to you.

[opdsgt]

Consistently one of the most creative photogs here IMHO...
http://i1087.photobucket.com/albums/j468/Danger131/Bug-GeD.jpg

[Stickman]

My niece loves these.... and she likes the patches as well.

http://farm9.staticflickr.com/8432/7809433118_a42baa7f21_o.jpg

[opdsgt]

You too, Stickman. Watch your six, brother paladin.

[samuse]

http://www.vortexgraphx.com/pics/ap4_xm15.jpg


DPMS 16” AP4 Upper Assembly:
DPMS Quad Rail Gas Block
Midwest Industries Gas Block Mount Flip-Up Front Sight
Command Arms Accessories BP-1 Universal Equipment Mount (cut to fit Gas Block)
Harris Manufacturing 9” to 13” Bipod with Notched Legs & Swivel (with DIY Pod-Lock)
Troy Industries MRF-DI 7” Modular Rail Forend
Falcon Industries Ergo Low Profile Rail Covers
Tapco Fusion Vertical Grip
Nikon ProStaff 2-7x32 Shotgun Hunter Scope
Leapers Adjustable Eye Relief Carry Handle Ring Mount with Flat Top Adaptor
Yankee Hill Machine Scope Riser (cut to fit BUIS)
Midwest Industries SPLP Same Plane Low Profile Flip-Up Rear Sight

Bushmaster XM15-E2S Lower Receiver Assembly:
DPMS Molded Receiver Rug
DPMS Accu-Wedge
Magpul Maglevel PMAG Magazine
Command Arms Accessories UPG Interchangeable Pistol Grip
Falcon Industries The Gapper
Command Arms Accessories CBS 6 Position Collapsible Buttstock
KNS Precision Non-Rotating Trigger/Hammer Pins

Hey jonconsiglio, sorry to hear about the stolen gear. I'll let you borrow this, but you gotta promise to lock it up!:D

http://www.ifc.com/wp-content/uploads/2008/06/621_356_napoleon_dynamite.jpg

[JBecker 72]

I don't understand what you are trying to accomplish with that rifle? Unless you are just trying to put as much shit on it as possible, then I guess you succeeded.

ETA: LOL, I got trolled.

[7.62WildBill]

http://www.vortexgraphx.com/pics/ap4_xm15.jpg


DPMS 16” AP4 Upper Assembly:
DPMS Quad Rail Gas Block
Midwest Industries Gas Block Mount Flip-Up Front Sight
Command Arms Accessories BP-1 Universal Equipment Mount (cut to fit Gas Block)
Harris Manufacturing 9” to 13” Bipod with Notched Legs & Swivel (with DIY Pod-Lock)
Troy Industries MRF-DI 7” Modular Rail Forend
Falcon Industries Ergo Low Profile Rail Covers
Tapco Fusion Vertical Grip
Nikon ProStaff 2-7x32 Shotgun Hunter Scope
Leapers Adjustable Eye Relief Carry Handle Ring Mount with Flat Top Adaptor
Yankee Hill Machine Scope Riser (cut to fit BUIS)
Midwest Industries SPLP Same Plane Low Profile Flip-Up Rear Sight

Bushmaster XM15-E2S Lower Receiver Assembly:
DPMS Molded Receiver Rug
DPMS Accu-Wedge
Magpul Maglevel PMAG Magazine
Command Arms Accessories UPG Interchangeable Pistol Grip
Falcon Industries The Gapper
Command Arms Accessories CBS 6 Position Collapsible Buttstock
KNS Precision Non-Rotating Trigger/Hammer Pins

Hey jonconsiglio, sorry to hear about the stolen gear. I'll let you borrow this, but you gotta promise to lock it up!:D

http://www.ifc.com/wp-content/uploads/2008/06/621_356_napoleon_dynamite.jpg

I get it...very humorous.:)

[Wormydog1724]

Nice build. I like it.

http://i416.photobucket.com/albums/pp247/wormydog1724/748de339.jpg

[jonconsiglio]

Double post

[jonconsiglio]

Aervoe on my BCM 14.5". Borrowed Munch520's Comp M2 since a bag of my gear was swiped, including both of my T1's and 3x.

http://i534.photobucket.com/albums/ee343/jonconsiglio/AF6903BE-F18D-4B01-A9FE-B1D6AE249A12-323-00000084BD453E74-1.jpg



Added a little sand overspray to lighten it up.

http://i534.photobucket.com/albums/ee343/jonconsiglio/6DBE0239-1883-4348-863D-C4750A464BE2-551-000000EC25B8D2DE.jpg

[netchemica]

Added a little sand overspray to lighten it up.

http://i534.photobucket.com/albums/ee343/jonconsiglio/6DBE0239-1883-4348-863D-C4750A464BE2-551-000000EC25B8D2DE.jpg

What do you use to paint it?

[duece71]

Aervoe on my BCM 14.5". Borrowed Munch520's Comp M2 since a bag of my gear was swiped, including both of my T1's and 3x.

http://i534.photobucket.com/albums/ee343/jonconsiglio/AF6903BE-F18D-4B01-A9FE-B1D6AE249A12-323-00000084BD453E74-1.jpg

This looks very nice, is it a pattern of some sort? Masking tape? Interested in how the scheme was achieved. Thanks, and sorry to hear about the theft, that sucks. Hopefully you will get some of the stolen goods back.

[jonconsiglio]

What do you use to paint it?


This looks very nice, is it a pattern of some sort? Masking tape? Interested in how the scheme was achieved. Thanks, and sorry to hear about the theft, that sucks. Hopefully you will get some of the stolen goods back.

thanks...

It's Aervoe paint. Sand base with sections of Marine Corps green, a little Dark Green (which is more like grass), a couple small spots of Field Drab, then the accents are Sand and Krylon Brown. I used Aervoe OD green as a dusting over everything. Then Sand as a dusting on the receivers today since it was too green.

For the accents, I cut shapes similar to Multicam out of a manilla folder, held it over and sprayed it. The closer, the finer the edges. If I hold it farther away or lift one side, it has a shadowing effect.

Hope that helps a bit. Here are some of the other ones I did. There's still another M&P and suppressor missing along with a bolt gun.

http://farm6.staticflickr.com/5326/7089441211_0a61cfd176_b.jpg

[samuse]

.............

[Cokeman]

http://www.vortexgraphx.com/pics/ap4_xm15.jpg


DPMS 16” AP4 Upper Assembly:
DPMS Quad Rail Gas Block
Midwest Industries Gas Block Mount Flip-Up Front Sight
Command Arms Accessories BP-1 Universal Equipment Mount (cut to fit Gas Block)
Harris Manufacturing 9” to 13” Bipod with Notched Legs & Swivel (with DIY Pod-Lock)
Troy Industries MRF-DI 7” Modular Rail Forend
Falcon Industries Ergo Low Profile Rail Covers
Tapco Fusion Vertical Grip
Nikon ProStaff 2-7x32 Shotgun Hunter Scope
Leapers Adjustable Eye Relief Carry Handle Ring Mount with Flat Top Adaptor
Yankee Hill Machine Scope Riser (cut to fit BUIS)
Midwest Industries SPLP Same Plane Low Profile Flip-Up Rear Sight

Bushmaster XM15-E2S Lower Receiver Assembly:
DPMS Molded Receiver Rug
DPMS Accu-Wedge
Magpul Maglevel PMAG Magazine
Command Arms Accessories UPG Interchangeable Pistol Grip
Falcon Industries The Gapper
Command Arms Accessories CBS 6 Position Collapsible Buttstock
KNS Precision Non-Rotating Trigger/Hammer Pins

Hey jonconsiglio, sorry to hear about the stolen gear. I'll let you borrow this, but you gotta promise to lock it up!:D

http://www.ifc.com/wp-content/uploads/2008/06/621_356_napoleon_dynamite.jpg

I read that in Napoleon's voice. :happy:

[munch520]

Thanks to Munch520 for the loaner M2 while I save up for at least a used T1. Sometimes things just suck!


Thats awesome you have a friend like Munch, hes a friend on my Facebook. Hes a good guy. I would help you out if you lived closer.


Munch is a good dude. He's in Ohio, but is coming to South Texas in a couple weeks.

Y'all are too kind. Happy to help!


Added a little sand overspray to lighten it up.

http://i534.photobucket.com/albums/ee343/jonconsiglio/6DBE0239-1883-4348-863D-C4750A464BE2-551-000000EC25B8D2DE.jpg

Lookin even better. No question I need to hit mine with some Aervoe.

http://i163.photobucket.com/albums/t294/myersma2/July%201%20Range/IMG_2120222.jpg

[jonconsiglio]

:DI was tryin' to catch jonconsiglio, but I don't guess he likes to torture his eyes for that long. Please see below for pics of my actual gun!



Ha! I saw the post and assumed it was a joke, but didn't see it was you that posted it...

So, you stripped all the paint off of your upper? Did it have the SOCOM barrel when we put the A5 on and I shot it?

[samuse]

Ha! I saw the post and assumed it was a joke, but didn't see it was you that posted it...

So, you stripped all the paint off of your upper? Did it have the SOCOM barrel when we put the A5 on and I shot it?

Yeah, the foaming bore cleaner ate about half of it off and I wiped the rest off with acetone and a paper towel. Took about a minute, maybe two. It was just Krylon and I only wiped the paint off the receiver itself.

Yup, always been a SOCOM. It's one of those LE6920HB guns that SAW had back in '03. I sold the original .170"lower back to the guy I bought it from and had it on that Noveske lower for about five months.

I ended up not liking the A5. My dot danced around a lot between shots, made my splits suck and was frustrating to shoot. Also, with that lower, I never could get a mag to seat on a closed bolt without bruising my hand, so I sold the lower and went back to a complete Colt with the original H2 buffer.

All is well with the world now:dance3:.

You oughta come out to CCP&R in the morning and shoot a pistol match with us...

[Jer]

I like your style.

http://img854.imageshack.us/img854/4852/arfence.jpg

;)

Me too....

https://lh4.googleusercontent.com/-6b5MMntTL1A/TVQ4p3LgAwI/AAAAAAAABV8/HxbSzvEz3Bc/s1024/IMG_3015.JPG

[jonconsiglio]

When is the next carbine competition?

Here's the other side.


http://i534.photobucket.com/albums/ee343/jonconsiglio/ECFDC8E5-912A-47B5-85F4-325DE46A1C38-555-000000EC6DBAFFE7.jpg

[samuse]

When is the next carbine competition?


Not sure, they usually have one every month.

[BCmJUnKie]

Consistently one of the most creative photogs here IMHO...

Thanks a lot man. Means a lot.

I try my best to come up with new stuff.

Glad you appreciate them!

[Wormydog1724]

Thanks a lot man. Means a lot.

I try my best to come up with new stuff.

Glad you appreciate them!

And I try my best to copy you. Lol. I havent got my wife to become a part of my pictures yet, still working on that. Nice work man!

http://i416.photobucket.com/albums/pp247/wormydog1724/953aa537.jpg

[Deaj]

My son and I just finished building this carbine:

http://home.centurytel.net/flanneldrawers/Stuff/carbine2mag.jpg

It's set up so that it fits him well functionally and ergonomically. This is my backup so it's also set up very close to the same as my primary (below):

http://home.centurytel.net/flanneldrawers/Stuff/carbine1mag.jpg

[Palmguy]

http://i134.photobucket.com/albums/q116/bridoyal/DSC_5880.jpg

[ALCOAR]

Deaj....you should pull rank on your son's Super Dynamic trigger, it's only fitting to go along with your ST selector. Nice to see you guys build them together:)

[Cameron]

http://farm9.staticflickr.com/8284/7817484556_2c99fae01d_b.jpg

http://farm8.staticflickr.com/7272/7817483972_efb8ee1198_b.jpg

[NoveskeFan]

The only thing that could make this pic better would be a piece of brass fly...oh, wait...Awesome photo!:)



http://farm9.staticflickr.com/8284/7817484556_2c99fae01d_b.jpg

[Mr. Mutt]

http://img256.imageshack.us/img256/2373/arsun002.jpg

[Shabazz]

Some REAL nice kit shown here.

[abad40]

BCM upper mid length 16", LaRue 10" rail, surefire scout with gear sector mount, & DD rear sight.
BCM lower, standard mil spec trigger, Magpul MOE stock, & noveske end plate...

[NoveskeFan]

BCM upper mid length 16", LaRue 10" rail, surefire scout with gear sector mount, & DD rear sight.
BCM lower, standard mil spec trigger, Magpul MOE stock, & noveske end plate...

http://i1261.photobucket.com/albums/ii598/abad04/adc368a2.jpg

Fixed it for ya, nice camo:D

[BCmJUnKie]

And I try my best to copy you. Lol. I havent got my wife to become a part of my pictures yet, still working on that. Nice work man!

hah thanks man. Always good to see your pics.

Gettin the girls involved just takes a little persuasion lol.

I bribe my girls with cooking dinner an a foot massage haha. Seems to work

[Cameron]

Gettin the girls involved just takes a little persuasion lol.

I bribe my girls with cooking dinner an a foot massage haha. Seems to work


My wife promises me a steak dinner and a foot rub if I take her too.... Hang on, that is not quite what you said is it???

Her personal 14.5" BCM blaster
http://farm8.staticflickr.com/7252/7818500566_d760ee97c6_b.jpg

http://farm9.staticflickr.com/8305/7818499478_4e68f236da_b.jpg

The grin says it all...
http://farm8.staticflickr.com/7119/7818554126_f2418c644b_b.jpg

[Cameron]

14.5" LW Colt

http://farm9.staticflickr.com/8424/7818500150_f05388fbb0_b.jpg

http://farm9.staticflickr.com/8446/7818499884_3571befbfd_b.jpg

[mig1nc]

You, sir, are a very lucky man.

Congrats.