AR Picture Thread [Archive] - Page 71

Honorthecall81

02-21-13, 19:43

You should make a thread detailing how you achieved this look.. Colors, process, etc.. I'd like to give it a go on one of mine.

ETA: Pic thread ;)

http://farm9.staticflickr.com/8369/8494318819_e45bdc8837_b.jpg

I used aervoe paint (ordered from DSG arms). I used a combo of four colors. earth yellow, marine corps green, earth brown, and highland brown I think. I think a key to having it turn out the way it did was because it had been cerakoted/duracoated with a od green on the upper and lower and a fde color on the buttstock and furniture. I wanted to change it up so I ordered those colors. I hit it with a shot of both the browns mixing them to give a two tone brown. I did a few light shots of the marine corp green on the butt stock and a few other places. The last color I used was the earth yellow. The technique to the spraying the earth yellow is a mix of splotching and streaking. This paint is pretty durable and seems pretty permanent. I was nervous as a long tailed cat in a room full of rocking chairs before I started to spray it. Here are the before and after pics.

BEFORE:
https://www.m4carbine.net/picture.php?albumid=641&pictureid=3175

AFTER:
https://www.m4carbine.net/picture.php?albumid=641&pictureid=3172

guitarman008

02-21-13, 21:15

Nice. I see you have a Burris scope. What model?

BCmJUnKie

02-22-13, 11:16

http://i1087.photobucket.com/albums/j468/Danger131/RevERsEVaniTy_zps44cb0ce0.jpg

Packman73

02-22-13, 11:25

http://www.tacomaworld.com/gallery/data/500/medium/Stamped_sbr_1.jpg (http://www.tacomaworld.com/gallery/showphoto.php/photo/309284/cat/500)

Packman73

02-22-13, 11:26

http://www.tacomaworld.com/gallery/data/500/medium/Stamped_sbr_1.jpg (http://www.tacomaworld.com/gallery/showphoto.php/photo/309284/cat/500)

Brian Brazier

02-22-13, 12:08

Very nice Packman, maybe WA State will allow SBR's someday :sarcastic:

Packman73

02-22-13, 12:50

Very nice Packman, maybe WA State will allow SBR's someday :sarcastic:
Thank you:), I wish you luck.;)

Onyx Z

02-22-13, 13:07

http://www.tacomaworld.com/gallery/data/500/medium/Stamped_sbr_1.jpg (http://www.tacomaworld.com/gallery/showphoto.php/photo/309284/cat/500)

did you use the rail sections included with the handguard to attach the AFG? I'm looking for an alternative to the aluminum rail sections to reduce weight.

Shao

02-22-13, 13:19

I only built up the lower and tacked stuff onto a BCM upper - but this is a happy time for me because my BCM middy finally has a permanent home and I bought my first red dot/HWS! I know she's nothing unique, but she's mine and I love her!

http://i49.photobucket.com/albums/f268/shaofutzer/IMG_1267_zpsf217e1a6.jpg

http://i49.photobucket.com/albums/f268/shaofutzer/IMG_1272_zps315f7365.jpg

http://i49.photobucket.com/albums/f268/shaofutzer/IMG_1273_zps8ead903c.jpg

http://i49.photobucket.com/albums/f268/shaofutzer/IMG_1274_zps0b5981c0.jpg

Stats:
BCM Upper:
16" CHF chrome-lined 1/7 w/A2 birdcage
BCM BCG
Centurion C4 12" rail
Eotech XPS2-0
BCM Gunfighter Mod 4 charging handle
MBUS Gen 2 front and rear BUIS with Mepro tritium front post
XTM hand stop with added XTM enhanced panel and XT segment
Ergo/Magpul ladder rail covers
Gear Sector E mount with Surefire backup body, Z68 tail, Valiant
VME head with Malkoff M31
Lower:
Forged Umbrella Corp lower
Combination Colt, S&W and PSA internals
Geissele SD-3G (with the 3.5lb spring)
Noveske STS-60 (non-ambi)
Magpul UBR with .77" extended buttpad and aluminum strike plate
Umbrella Corp Grip 23
KAC trigger guard (newer no gap version)
Not seen:
Magpul MS3 sling
Lancer L5AWM 30 rounder (preferred mag)

Unloaded weight: 8lb 9oz

Since acronyms are koolaid, I dub this rifle the RRFHP: Rifle, Rapid-Fire Hole Puncher

kenken

02-22-13, 14:57

I only built up the lower and tacked stuff onto a BCM upper - but this is a happy time for me because my BCM middy finally has a permanent home and I bought my first red dot/HWS! I know she's nothing unique, but she's mine and I love her!

http://i49.photobucket.com/albums/f268/shaofutzer/IMG_1267_zpsf217e1a6.jpg

http://i49.photobucket.com/albums/f268/shaofutzer/IMG_1272_zps315f7365.jpg

http://i49.photobucket.com/albums/f268/shaofutzer/IMG_1273_zps8ead903c.jpg

http://i49.photobucket.com/albums/f268/shaofutzer/IMG_1274_zps0b5981c0.jpg

Stats:
BCM Upper:
16" CHF chrome-lined 1/7 w/A2 birdcage
BCM BCG
Centurion C4 12" rail
Eotech XPS2-0
BCM Gunfighter Mod 4 charging handle
MBUS Gen 2 front and rear BUIS with Mepro tritium front post
XTM hand stop with added XTM enhanced panel and XT segment
Ergo/Magpul ladder rail covers
Gear Sector E mount with Surefire backup body, Z68 tail, Valiant
VME head with Malkoff M31
Lower:
Forged Umbrella Corp lower
Combination Colt, S&W and PSA internals
Geissele SD-3G (with the 3.5lb spring)
Noveske STS-60 (non-ambi)
Magpul UBR with .77" extended buttpad and aluminum strike plate
Umbrella Corp Grip 23
KAC trigger guard (newer no gap version)
Not seen:
Magpul MS3 sling
Lancer L5AWM 30 rounder (preferred mag)

Unloaded weight: 8lb 9oz

How did you get a BCM logo on your Centurion rail? Mine has Centurion on both sides. Looks good. I like it.

kenken

Degs

02-22-13, 15:07

How did you get a BCM logo on your Centurion rail? Mine has Centurion on both sides. Looks good. I like it.

kenken

I think the only way is to get them from BCM. My brother got a 16" middy/Centurion upper when they were available a few weeks ago, and his rail has BCM on it.

edit... Shao, that looks great btw

masakari

02-22-13, 16:14

http://i131.photobucket.com/albums/p313/madcatjoe/IMG_20130221_145749_zps1b2bff19.jpg
Im LOVING the new Troy Delta Rail.

Wormydog1724

02-22-13, 16:47

That TA33 is the wrong color. I coulda swore I sent you green.. ;)

yfz

02-22-13, 17:28

Masakari, I did not really like that handguard till I seen your pic. Good looking rifle.

http://i1207.photobucket.com/albums/bb474/yfz11/DSCN0512_zpscfc58c20.jpg

masakari

02-22-13, 18:02

That TA33 is the wrong color. I coulda swore I sent you green.. ;)

haha yes you did, and that one is now on my Colt... pics of all 3 of my completed rifles will be up sometime this week in the custom build section, don't worry!
another Picture of this one:
http://i131.photobucket.com/albums/p313/madcatjoe/IMG_20130221_145738_zps56720f21.jpg

Shao

02-22-13, 19:36

I think the only way is to get them from BCM. My brother got a 16" middy/Centurion upper when they were available a few weeks ago, and his rail has BCM on it.

edit... Shao, that looks great btw

What he said.. it came that way! ...and thanks! She has a sister that's waiting on some gray furniture. I'll post pics when she's ready.

leeradio13

02-22-13, 21:10

What rail system is that?

did you ever get an answer?

Packman73

02-22-13, 21:27

Troy VTAC

TOMTOM

02-22-13, 21:33

http://i737.photobucket.com/albums/xx14/TD236/image-2_zpsc122ea01.jpeg

darknight

02-22-13, 22:56

http://img195.imageshack.us/img195/9252/ar15water.gif

The AR15

Aaron_B

02-22-13, 23:40

Crappy cell phone pic. The Colt Trio. Procuring more funds for ACOGs for the optic less ones.

http://i796.photobucket.com/albums/yy249/aaronwbunch/2071D70B-20C3-4599-9A86-90CB9507BCC6-877-000000E248141C58_zps0e543fc7.jpg

Thump_rrr

02-23-13, 08:57

The Stag 3G and the Noveske Lower both came in this week.:D
The Norinco Upper is only temporarily on the Noveske Lower till a suitable upper is found.
I guess that makes it a Norveske.
http://i24.photobucket.com/albums/c40/Thump_rrr/DSCN0861_zpsdfa7d734.jpg

adh

02-23-13, 10:17

haha yes you did, and that one is now on my Colt... pics of all 3 of my completed rifles will be up sometime this week in the custom build section, don't worry!
another Picture of this one:
http://i131.photobucket.com/albums/p313/madcatjoe/IMG_20130221_145738_zps56720f21.jpg

looks interesting....If/when BCM gets any of their uppers back in stock there may be one of these Troy rails in my future.

14.5" barrel or 16"????Looks 14.5 but not sure

Pic thread
old pic of the way my SBR was originally set up
http://i226.photobucket.com/albums/dd192/adh_adh/my1911001.jpg

masakari

02-23-13, 11:33

looks interesting....If/when BCM gets any of their uppers back in stock there may be one of these Troy rails in my future.

14.5" barrel or 16"????Looks 14.5 but not sure

Its a 14.7" with pinned A2 FH.

molonlabe

02-23-13, 12:25

What weapons light brand are those?

Well played, both of you.

I'm actually liking the MOE handguard quite a bit. The WML feels awesome on it.

http://farm9.staticflickr.com/8374/8490220493_b0fc484960_c.jpg (http://www.flickr.com/photos/58801550@N02/8490220493/)

Brian Brazier

02-23-13, 12:55

That is an Inforce Weapon Light
http://www.inforce-mil.com/rifle-carbine-lights.php

Packman73

02-23-13, 13:09

did you use the rail sections included with the handguard to attach the AFG? I'm looking for an alternative to the aluminum rail sections to reduce weight.
Yes, I did.

Pic thread.
http://www.tacomaworld.com/gallery/data/500/Stamped_3.jpg (http://www.tacomaworld.com/gallery/showphoto.php/photo/309835/cat/500)

28003

02-23-13, 13:12

done with this one
15530

JBecker 72

02-23-13, 15:27

http://i149.photobucket.com/albums/s73/hownowbrowncow_02/Guns/IMAG0482_zps8613e630.jpg

http://i149.photobucket.com/albums/s73/hownowbrowncow_02/Guns/IMAG0491_zps1455256f.jpg

http://i149.photobucket.com/albums/s73/hownowbrowncow_02/Guns/IMAG0487_zps5fc22aed.jpg

http://i149.photobucket.com/albums/s73/hownowbrowncow_02/Guns/IMAG0485_zpse711a92a.jpg

mvician

02-23-13, 15:29

http://i48.photobucket.com/albums/f240/mvician/BCMLWMiddy_Spikes/P1170475_zps9e621db0.jpg

jaxman7

02-23-13, 15:36

JBecker & mvician,

Both superb looking rifles.

-Jax

Shao

02-23-13, 15:54

http://i149.photobucket.com/albums/s73/hownowbrowncow_02/Guns/IMAG0482_zps8613e630.jpg

Sweet rifle. With the exception of the Battle-Comp and tape switch, it looks like one I would build.

JBecker 72

02-23-13, 15:56

Shao

02-23-13, 16:22

Thanks!

You know, the only reason I have the Battlecomp is because I won it here last year. Otherwise I would still be using the A2. Figure I gotta put it on something.

Only thing I am thinking about changing on that rifle is the stock. I am probably gonna get a B5 Bravo one of these days. That MOE has too much play for my liking.

I'm an A2 guy myself. If you haven't checked out the stocks from Mission First Tactical, I would look into them. They're not nearly as ugly in person as they are in pictures. I had an STR and hated it because it was too wide and clunky. Same thing with the B5. The BUSL is slimmer, locks up tight, seems bullet-proof, has the same amount of storage, and weighs less than an MOE with the .77" pad installed (and just a little bit more with the standard .3" pad). Forget the CAA connection, the new MFT stuff that I've checked out is pretty nice. I've got a matched gray Minimalist stock and Engage pistol grip for my DDM4V1LW on order. The Minimalist is supposed to weigh only 4.5 oz and if it's made like and locks up like the BUSL on my BCM and LMT REs, then it will be the ultimate light weight stock IMO. Sorry, I had a B5 Bravo and it was a nice stock, but just didn't feel right for me.

jaxman7

02-23-13, 16:45

http://i907.photobucket.com/albums/ac279/jaxman7/2013-02-23_16-41-29_809_zps3634dc79.jpg

JBecker 72

02-23-13, 17:02

I love that chocolate rifle Jax.

Sent from my PC36100 using Tapatalk 2

jaxman7

02-23-13, 17:25

Thanks JB!! I appreciate the kind words.

I love my Hershey as well. ;)

The new aluminum Redi-Mag

http://i907.photobucket.com/albums/ac279/jaxman7/2013-02-23_16-59-26_555_zpsf4163adf.jpg

http://i907.photobucket.com/albums/ac279/jaxman7/2013-02-23_16-58-31_224_zpsfc3e09b1.jpg

Pretty good design improvement over the original Redi-Mag versions and the Redi-Mod.

-Jax

PieceKeeper

02-23-13, 18:02

http://i1237.photobucket.com/albums/ff480/BrutalRain/Daniel_Defense/SAM_31333_zps834dc37e.jpg
http://i1237.photobucket.com/albums/ff480/BrutalRain/Daniel_Defense/SAM_31353_zpseb5d6b6c.jpg

MiamiCracker

02-23-13, 20:33

15536

uglyducky

02-23-13, 20:46

http://i48.photobucket.com/albums/f240/mvician/BCMLWMiddy_Spikes/P1170475_zps9e621db0.jpg

:D . . . great looking ar

uglyducky

02-23-13, 20:47

kenpstok151

02-23-13, 20:48

Smith & Wesson M&P 15 MOE and Colt LE6920 M4
http://farm9.staticflickr.com/8229/8500333832_2e3bc629d2_z.jpg (http://www.flickr.com/photos/kenpstok_rnd/8500333832/)
http://farm9.staticflickr.com/8386/8500333860_b0830cfc3d_z.jpg (http://www.flickr.com/photos/kenpstok_rnd/8500333860/)
http://farm9.staticflickr.com/8515/8499228043_2562b34ab0_z.jpg (http://www.flickr.com/photos/kenpstok_rnd/8499228043/)
http://farm9.staticflickr.com/8110/8500333864_043c2a2eff_z.jpg (http://www.flickr.com/photos/kenpstok_rnd/8500333864/)
Smith & Wesson M&P 15 MOE and Colt LE6920 M4 (http://www.flickr.com/photos/kenpstok_rnd/8500333864/) by kenpstok rnd (http://www.flickr.com/people/kenpstok_rnd/), on Flickr

wild_wild_wes

02-24-13, 00:13

http://i149.photobucket.com/albums/s73/hownowbrowncow_02/Guns/IMAG0482_zps8613e630.jpg

What is the barrel?

JBecker 72

02-24-13, 00:56

What is the barrel?

BCM 16" lightweight middy.

deviljon

02-24-13, 13:22

http://i53.photobucket.com/albums/g71/j0ny4ng/20130223_153826.jpg

samuse

02-24-13, 15:24

^^^
I like those. Block IIs are my favorites.

ZINCOGNITO

02-24-13, 16:38

http://i53.photobucket.com/albums/g71/j0ny4ng/20130223_153826.jpg

Good looking guns!

By any chance, have you been on any Z forums? Name sounds familiar....

cgjane

02-24-13, 17:40

3 SBRs:
>11.5 IDF/ KISS CLONE
>10.5 FDE MK18 Mod0 Variant
>10.3 MK18 Mod0 Variant (just missing the "correct" rear buis for a clone)
http://i6.photobucket.com/albums/y218/gw4k/8C733C73-CFFB-472C-A9D4-20E9D92EA08D-9564-00000AFB2DC5CAD9_zps649e3236.jpg
http://i6.photobucket.com/albums/y218/gw4k/D230DADC-3EB5-40ED-BBED-51F7225236AA-9564-00000AFB0EB62226_zps0d68ba63.jpg
http://i6.photobucket.com/albums/y218/gw4k/1D6015FC-E252-4097-9ECB-4FB1619B1AF2-9564-00000AFB49A6C32A_zpsa349395c.jpg
http://i6.photobucket.com/albums/y218/gw4k/1D1C842E-E07D-4A09-94A6-FC681AFB1DB1-9564-00000AFB3BE18E29_zps69d953d8.jpg
http://i6.photobucket.com/albums/y218/gw4k/990A8FB3-B29B-4366-ABCC-332B3D2B8F7C-9564-00000AFB42C9A7F1_zpsa402f525.jpg
http://i6.photobucket.com/albums/y218/gw4k/80159ACD-A1AE-42FF-827D-79C3B1AAF8B5-9564-00000AFB5DBB2489_zpse48acfab.jpg

deviljon

02-24-13, 18:06

Good looking guns!

By any chance, have you been on any Z forums? Name sounds familiar....

Yes, I am also on my350z :thumbup:

masakari

02-24-13, 18:57

http://i131.photobucket.com/albums/p313/madcatjoe/IMG_20130224_160532_zps990b14c8.jpg
http://i131.photobucket.com/albums/p313/madcatjoe/IMG_20130224_160508_zps8ba14d63.jpg
http://i131.photobucket.com/albums/p313/madcatjoe/IMG_20130224_160557_zps8149ab6c.jpg
More details, and eventually more pics in my custom build thread:
http://m4carbine.net/showthread.php?t=125248

DasBulk

02-24-13, 19:50

http://i1197.photobucket.com/albums/aa433/DarynRodriguez/91A0FD27-581A-48BB-B0C8-413DA3D89CB6-454-00000110F22BDA9C_zpse97edc43.jpg

http://i1197.photobucket.com/albums/aa433/DarynRodriguez/866E6E2E-FFFA-484C-A33D-421798E0F941-454-00000110E69F6896_zpsc7320d7b.jpg

Wormydog1724

02-24-13, 19:53

http://i416.photobucket.com/albums/pp247/wormydog1724/a0039fca-bd0a-487c-81f2-0bd8aaa79ffe_zpsdea4e3e9.jpg

glock21xxx

02-24-13, 20:56

DasBulk

02-24-13, 20:59

Electrical tape. :p
Did have the bezel just to keep it cleaner on my Glock19. But decided that the big white letters on the side annoyed me too, so I hit them with the tape too. haha

Rattlehead

02-25-13, 00:22

http://farm9.staticflickr.com/8110/8506196126_f762bf99dc_c.jpg

Thump_rrr

02-25-13, 20:52

hard to tell in the pics, is that a g1 n4 lower?
Yes it is a Gen 1 N4 lower.
Maybe this is a little clearer.
http://i24.photobucket.com/albums/c40/Thump_rrr/DSCN0849_zps9dbe40e8.jpg

ssracer

02-25-13, 21:07

http://farm9.staticflickr.com/8234/8509212170_68e5f0f1a4_b.jpg

vecdran

02-25-13, 22:30

http://www.jp-vd.com/Military/firearms/i-d4bG2PD/1/XL/ar15_shemagh-XL.jpg

Quiet-Matt

02-26-13, 04:58

https://lh6.googleusercontent.com/-Di8tII4L1z4/USwkQpv_X3I/AAAAAAAAKt8/nmN0PmxqO-0/s1280/2013-02-25%25252021.27.53.jpg

jaxman7

02-26-13, 07:16

https://lh6.googleusercontent.com/-Di8tII4L1z4/USwkQpv_X3I/AAAAAAAAKt8/nmN0PmxqO-0/s1280/2013-02-25%25252021.27.53.jpg

Alright Matt. More pics please. :)

Did you move?

-Jax

jaxman7

02-26-13, 08:04

http://i907.photobucket.com/albums/ac279/jaxman7/3gun%2017%20July/3GUN042-1.jpg

My original baby. The one I had to begrudgingly sell a couple of years ago when hard times came.

This was the first properly built rifle I'd done. Wasn't the best but wish I still had it.

-Jax

fail wagon

02-26-13, 14:15

Here is my first build, my first center fire rifle actually. 6.5 lbs without a magazine. I have a vcas sling and aimpoint pro in the mail so it's going to go up a bit.
BCM lightweight middy 16" upper
BCM BCG
BCM mod 4 CH
KAC micro rear sight

SAA lower
PSA MOE parts kit
BCM mod 1 grip

http://i52.photobucket.com/albums/g29/sirbikealot7/7416ACFF-5150-4C4A-89CF-D29FC8FE23C2-3641-0000011778EEDBAA.jpg

Wormydog1724

02-26-13, 14:23

http://i416.photobucket.com/albums/pp247/wormydog1724/IMG_0148_zpsd8bd50da.jpg

Quiet-Matt

02-26-13, 15:49

Alright Matt. More pics please. :)

Did you move?

-Jax

I'll see what I can do about some pics. Yep, moved about 5 miles north into TN.

Leonidas24

02-26-13, 17:35

http://img9.imageshack.us/img9/2185/picture005tt.jpg (http://imageshack.us/photo/my-images/9/picture005tt.jpg/)

Trying to take pics with a tablet...

jwperry

02-26-13, 19:23

Can't wait to get my 14.5" barrel in so I can install it and finally finish this carbine..

http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/4467734E-C4A0-443D-81CF-C4521BC4E879-5124-000001640146E291_zpsff379f9c.jpg

aud1838

02-26-13, 21:04

http://i131.photobucket.com/albums/p313/madcatjoe/IMG_20130221_145720_zpse5471197.jpg
Husband customized this for me, and I love it :-)
It is so light and easy to use

skeebinz

02-26-13, 23:00

Noveske/KAC 300blk

http://i54.tinypic.com/24gkh9y.jpg

Wormydog1724

02-27-13, 07:40

Boy-oh-boy are you slacking. Yea, go hurry up and kill 50 yotes and take a picture so we can all be green with envy. haha.

I'm working on it.

http://i416.photobucket.com/albums/pp247/wormydog1724/bc8e24ed-0470-445a-b05a-e5960ebcc699_zps68eb1e50.jpg

http://i416.photobucket.com/albums/pp247/wormydog1724/d0d96fb3-f849-4d8e-8850-071aa26f4310_zps67148a98.jpg

http://i416.photobucket.com/albums/pp247/wormydog1724/0387390e-bd21-4b8b-ae21-e21a14e67bd9_zpsaa3bc8d0.jpg

jaxman7

02-27-13, 13:25

fallenromeo

02-27-13, 13:29

....NBR..

No Barrelled Rifle :D

pretty sure a 0" barrel is an NFA item.

jwperry

02-27-13, 15:43

pretty sure a 0" barrel is an NFA item.

Since it is smooth bore, I should be ok.

:D

ASH556

02-27-13, 15:49

Since it is smooth bore, I should be ok.

:D

No man, that just means it has to be 18" instead of 16". You're arguing the wrong way, friend.:big_boss:

hunt_ak

02-27-13, 19:24

http://www.thealaskalife.com/wp-content/uploads/2013/02/IO-Cover-Tango-Down-Side-Clipped.jpg

My take on the new IO Cover:
http://www.thealaskalife.com/featured/io-cover-review/

sxshep

02-27-13, 19:50

http://i182.photobucket.com/albums/x225/shepshep240/2013-02-21_13-14-30_869_zpsb36e8dee.jpg

KAC SR15 E3 Mod1 w/ URX 3.1 ... still debating on optics.

jaxman7

02-27-13, 19:54

http://www.thealaskalife.com/wp-content/uploads/2013/02/IO-Cover-Tango-Down-Side-Clipped.jpg

My take on the new IO Cover:
http://www.thealaskalife.com/featured/io-cover-review/

hunt,

Being from Mississippi I don't quite understand what all that white stuff covering your gun is. Maybe you work at a confectioners sugar factory or are possibly knee deep in a Mexican to Alaskan drug cartel ;) but very good write up and great photography man.

Love my IO cover as well.

-Jax

RIDE

02-27-13, 20:15

JBecker 72

02-27-13, 20:21

So where can I actually order an IO cover at? I don't see it on TD's website.

ETA: Might as well add a picture since this is a pic thread.

http://i149.photobucket.com/albums/s73/hownowbrowncow_02/Guns/IMAG0486_zpsba962669.jpg

jr0xas

02-27-13, 20:53

What micro mount is that?

Looks to me like an Aimpoint LRP (Lever Release Picatinny) Mount.

Adding to the iO goodness:

http://img824.imageshack.us/img824/454/noveske105.jpg

hunt_ak

02-27-13, 21:39

hunt,

Being from Mississippi I don't quite understand what all that white stuff covering your gun is. Maybe you work at a confectioners sugar factory or are possibly knee deep in a Mexican to Alaskan drug cartel ;) but very good write up and great photography man.

Love my IO cover as well.

-Jax
Thank you, I appreciate it. I know, I know, that funny white stuff sure makes for some interesting photos! :)

Looks to me like an Aimpoint LRP (Lever Release Picatinny) Mount.

That is correct

Pic thread:
http://www.thealaskalife.com/wp-content/uploads/2013/02/IO-Cover-HDR3.jpg

Token3495

02-27-13, 22:00

So where can I actually order an IO cover at? I don't see it on TD's website.

Rainier arms just posted it on their site: http://www.rainierarms.com/?page=shop/detail&product_id=3483

JBecker 72

02-28-13, 09:40

Rainier arms just posted it on their site: http://www.rainierarms.com/?page=shop/detail&product_id=3483

I signed up for a notification. Really want one of those.

Doc. Holiday

02-28-13, 09:55

Those are pretty cool. Waiting sucks!

jaxman7

02-28-13, 10:11

Rainier arms just posted it on their site: http://www.rainierarms.com/?page=shop/detail&product_id=3483

Can someone tell me what Micro mount is pictured in the link?

-Jax

Token3495

02-28-13, 10:35

Can someone tell me what Micro mount is pictured in the link?

-Jax

From this picture, my guess would be an unreleased Fortis mount.
http://www.rainierarms.com/img/shop/product/a24e4d1e10f6b65bec89e26b13133c50.jpg

nolt

02-28-13, 11:34

they (Rainier on their FB page) said to watch their website for that mount either today or tomorrow.... FYI

BCmJUnKie

02-28-13, 11:52

http://i1087.photobucket.com/albums/j468/Danger131/CaRboNExPOSuRE_zps9249ee22.jpg

jaxman7

02-28-13, 12:30

From this picture, my guess would be an unreleased Fortis mount.
http://www.rainierarms.com/img/shop/product/a24e4d1e10f6b65bec89e26b13133c50.jpg

Ah. Gotcha. Missed the little Fortis logo. Thought it could have been Fortis b/c of the HG pictured w/it. Thanks,

-Jax

andy311

02-28-13, 13:03

Finally got it like I want it. Can't wait to go work up a load for it and see how it shoots with the new barrel.

http://i257.photobucket.com/albums/hh219/FCandy311/0669c5c6-da37-4647-8b16-a7b74eed26e6_zps2d3678f8.jpg

ASH556

02-28-13, 13:07

http://i854.photobucket.com/albums/ab104/ASH556/IMG_1852.jpg
http://i854.photobucket.com/albums/ab104/ASH556/IMG_1853.jpg
http://i854.photobucket.com/albums/ab104/ASH556/IMG_1850.jpg

yfz

02-28-13, 17:24

Didn't colt sell ars chambered in 222 rem to Europe and the only difference between the two mags it he base plate?

LOBO

02-28-13, 18:13

http://farm8.staticflickr.com/7437/9368727776_14214221bd_b.jpg

Fire

02-28-13, 18:20

Colt 6920 - Cut to 14.5", permanently attached Surefire 212A, shaved FSB - all done by ADCO

http://i689.photobucket.com/albums/vv254/AllPackedUp/furrcopy_zps80354c3f.jpg

firepolock

02-28-13, 19:37

Didn't colt sell ars chambered in 222 rem to Europe and the only difference between the two mags it he base plate?

I THINK they sold a few here too. Saw one on GB a few months ago.

Pic thread

http://img.tapatalk.com/d/13/03/01/e6ema7e4.jpghttp://img.tapatalk.com/d/13/03/01/bega8a9e.jpghttp://img.tapatalk.com/d/13/03/01/aguha5az.jpg

Ooo, and btw, its called an AxePack. Very fitting name.

And they can be found on ebay from time to time for pretty cheap. Got mine for 40 shipped
Sent from my Huawei-U8665 using Tapatalk 2

Quiet-Matt

02-28-13, 19:49

https://lh5.googleusercontent.com/-vpXSkejD51c/UTAIYRfrK4I/AAAAAAAAKuY/oB4Nxh4qLOI/s1280/20130228_175524.jpg

Wormydog1724

02-28-13, 20:24

http://i416.photobucket.com/albums/pp247/wormydog1724/cf54ebd0-61a7-4dff-909f-682b10f9ca4c_zps84a5db17.jpg

StevieJ309

02-28-13, 23:20

I need a Multitasker in my life.

Brimstone

03-01-13, 13:04

http://farm9.staticflickr.com/8094/8518373585_2e9568b4e0_b.jpg

Quiet-Matt

03-01-13, 17:30

https://lh3.googleusercontent.com/-yt89EAL6Meo/UTE5c8FKCUI/AAAAAAAAKvI/BDVmnLkCeQ4/s891/photo.jpg

FAB45

03-01-13, 19:14

http://i1252.photobucket.com/albums/hh579/GEARS45/DSCN0569_zps0b2bd515.jpg

Bowser

03-02-13, 03:23

http://i3.minus.com/ibyynEG6dN574q.jpg

Alexander

03-02-13, 17:22

.........................

jaxman7

03-02-13, 19:08

http://i1252.photobucket.com/albums/hh579/GEARS45/DSCN0569_zps0b2bd515.jpg

Bought Leatherman Wave in 2005 when I was still an 11B in the Army. Put it through absolute hell. Broke the serrated blade, scissors, file, large flathead, and chipped the head off of the pliers.

Called Leatherman and asked if they would warranty it and replace it with one of their new black Waves. In a week and a half I received a new black one and I was only out of shipping towards them. Awesome customer service and a great product. Like.BCM, LaRue, and Smith I am a customer for life with Leatherman.

-Jax

Jr.

03-02-13, 19:46

http://i286.photobucket.com/albums/ll96/jrsmokestacks/1E286B85-F279-4C09-BF9C-A1E2E1A8036F-5387-000003D32C8EC419_zps1785cefc.jpg

jaxman7

03-02-13, 19:52

http://i286.photobucket.com/albums/ll96/jrsmokestacks/1E286B85-F279-4C09-BF9C-A1E2E1A8036F-5387-000003D32C8EC419_zps1785cefc.jpg

Long time Aimpoint guy. Over the last 5 years I've had a ML2, M4S, and still run a T1. Finally broke down and bought an XPS 3-0 w/LT110. Looking forward to testing one out long term.

-Jax

Rattlehead

03-02-13, 20:06

http://farm9.staticflickr.com/8389/8472158507_43158bb864_b.jpg

Brian Brazier

03-02-13, 20:16

Long time Aimpoint guy. Over the last 5 years I've had a ML2, M4S, and still run a T1. Finally broke down and bought an XPS 3-0 w/LT110. Looking forward to testing one out long term.

-Jax

Ihave always been an Eotech guy, decided to buy an Aimpoint PRO, really wish I had bought another Eotech XPS 2-0

shadow93

03-02-13, 20:47

http://farm9.staticflickr.com/8389/8472158507_43158bb864_b.jpg

What is that Oil pen you have there? Looks useful...

Jr.

03-02-13, 21:51

I've got a acog, accupoint, aimpoint pro, and a eotech xps2. The pro and eotech are my favorite. I would have a hell of a time trying to choose only 1.

Cokeman

03-02-13, 23:00

What is that Oil pen you have there? Looks useful...

And where did you get it?

D. Manley

03-02-13, 23:17

And where did you get it?

I don't know what's in the pic but I keep a Militec-1 needle oiler in my bag. I don't know for sure if they still do but for the longest time they would send a sample oiler free for the asking with an email request. Great folks & great product.

Sent from my Droid RAZR MAXX using Tapatalk2

Cokeman

03-03-13, 01:11

I'll check into that. How long ago did you get it?

The picture shows a tube of Breakfree CLP. I've never seen BF CLP in a tube like that.

kenndapp

03-03-13, 05:39

http://farm9.staticflickr.com/8389/8472158507_43158bb864_b.jpg

interesting BCG. who makes it?

txbonds

03-03-13, 05:58

interesting BCG. who makes it?

Looks like a seekins precision logo which would make sense since that is a seekins precision made upper.

Wormydog1724

03-03-13, 08:40

I've tried eotechs, aimpoints, ACOGs, accupoints, and iron sights. Not in combat, but not just bench shooting either. Mostly 3 gun and some action rifle matches (USPSA with rifles) and right now I still prefer the accupoint over everything. Then it would be my little ACOG shown here. Then aimpoint, eotech, and last irons.

http://i416.photobucket.com/albums/pp247/wormydog1724/700d67da-014a-4c85-82d7-199ccd467f2e_zps7349e935.jpg

jaxman7

03-03-13, 13:15

Wormy,

Why the Accupoint over everything else?

Don't take that question wrong bud. Just attaining others' views/opinions. Thanks!

-Jax

kenndapp

03-03-13, 13:52

Wormydog1724

03-03-13, 13:57

Wormy,

Why the Accupoint over everything else?

Don't take that question wrong bud. Just attaining others' views/opinions. Thanks!

-Jax

Oh no problem man. Just for what I use it for, shots from 5-300, sometimes to 500, it allows me to quickly change magnifications for the shot needed. I use the German #4 reticle and with a 200 yard zero, anything out to 250 is dead on (with excaptiong of the close stuff where I have to remember the mechanical offset), and with a little practice I figured out my holds beyond that out to 500. On 1x for the close shots I can use it like a reddot, then switch to a 400 yard target and go to 4x. It is heavier than a reddot, but making accurate shots at distance has more benefits to me than weight as I'm not hiking with it all over the countryside. The added weight also can help balance the weapon and really help manage recoil (I know its 556, what recoil?). I just prefer an actual reticle like the Accupoint or ACOG even vs a reddot or a holographic reddot. Its just something I've messed with and really found what I like and my shooting style works with it.

Look at some of my youtube vids and you'll see what kind of 3 gun matches I shoot, especially the 3MR (3 Mils Right) matches with close shots and far shots.

Warp

03-03-13, 14:43

Wormy,

Why the Accupoint over everything else?

Don't take that question wrong bud. Just attaining others' views/opinions. Thanks!

-Jax

been considering an accupoint for a long time. would like to hear more aswell.

The Accupoint has some really nice things going for it. You get an illuminated reticle 24/7 without the need for batteries or electronics. That was the single biggest selling point to me compared to the other variable power scopes. Plus the Trijicon reputation and track record. I trust the Accupoint will be as durable as an optic of that type can be. I think the variable power 1-4 or 1-6, with a "true 1x" bottom end, sells itself pretty well. For a general or multi purpose rifle you get performance very similar to a red dot when on 1X, but with the throw of a lever you can dial in 4-6x magnification for more range, target identification, precision, etc.

The biggest downside people report to the Accupoint vs some of the other options is the reticle. There's no BDC option and the triangle reticle, which works best as a red dot substitute (both eyes open, fast, close), has that vertical black line under the triangle that can block a small or distant target from view when holding over at longer ranges. But as mentioned above, for 0-250 and most practical purposes, it's fine. Zero for 50/200 and you should have an effective 'point blank' of 0-250 yards (no more than a couple inches vertical deviation from POA)

And since this is a picture thread, here is my carbine that currently wears the Accupoint (BattleComp/Mossie Midnight FSB mount for X300UA + LaRue index clips are on the way!)

http://i54.photobucket.com/albums/g105/austin3161324/Firearms/20130303_153009_zpsb855042c.jpg

Brown_Bear

03-03-13, 15:21

http://i.imgur.com/3dngLNj.jpg

kenndapp

03-03-13, 15:49

I think the variable power 1-4 or 1-6,

there is a 1-6x accupoint???

Lopro619

03-03-13, 16:14

there is a 1-6x accupoint???
http://www.deviantart.com/download/205223454/negative_ghostrider____by_guerrillaone-d3e6nfi.jpg

BCmJUnKie

03-03-13, 16:37

http://i1087.photobucket.com/albums/j468/Danger131/HeaTeR_zps6f4ffa8a.jpg

Warp

03-03-13, 16:42

there is a 1-6x accupoint???

No. Trijicon hasn't done anything with the Accupoint lineup for some time.

I was just referencing the category/class that the Accupoint resides in

Aaron_B

03-03-13, 18:12

Wife got a new fancy camera, figured I would try my hand at it a little bit.

http://i796.photobucket.com/albums/yy249/aaronwbunch/DSC_0097_zps3bd063a2.jpg

Colt 6720, 13.5 NSR, KAC sights, KAC trigger guard.

Plans - TA44S-10 ACOG, Scout light, and probably Sopmod stock.

7.62WildBill

03-03-13, 18:21

Great pic Aaron, and that is a very good looking rifle! Did you shave the FSB?

Aaron_B

03-03-13, 18:26

Thank you. I did shave the FSB down, pretty much makes the best gas block.

DasBulk

03-03-13, 19:51

Colt 6920

http://i1197.photobucket.com/albums/aa433/DarynRodriguez/IMG_7551_zps2ad0cf26.jpg

Wormydog1724

03-03-13, 19:59

http://i416.photobucket.com/albums/pp247/wormydog1724/616a9c10-eba5-49e5-a434-8c2b5e2bc29a_zps4cd1116c.jpg

jaxman7

03-04-13, 00:23

http://i907.photobucket.com/albums/ac279/jaxman7/IMG_20130304_002051_zps3f3339a6.jpg

Tootsies

03-04-13, 01:05

http://imageshack.us/a/img820/3044/img201303021521251024x1.jpg

Brahmzy

03-04-13, 01:14

Nice Tootsies. :cool:

mikejg

03-04-13, 01:23

jax,

Who makes that section of rail that is clamped onto the FSP? I know I've seen it before but can't remember where. Thanks.

Sean W.

03-04-13, 03:04

Wife got a new fancy camera, figured I would try my hand at it a little bit.

Colt 6720, 13.5 NSR, KAC sights, KAC trigger guard.

Plans - TA44S-10 ACOG, Scout light, and probably Sopmod stock.

Nice rifle and camera. The rifle looks almost like mine.

Aaron_B

03-04-13, 03:16

Thx, me learning to use a camera seems like rocket science.

Pic Thread.

http://i796.photobucket.com/albums/yy249/aaronwbunch/DSC_0099_zps2c1d1c70.jpg

jaxman7

03-04-13, 05:45

jax,

Who makes that section of rail that is clamped onto the FSP? I know I've seen it before but can't remember where. Thanks.

Mossie Tactics

http://www.mossietactics.com/Support.html

At The Ready

03-04-13, 06:49

http://imageshack.us/a/img820/3044/img201303021521251024x1.jpg

wow, just... wow

Wolverine6G

03-04-13, 09:06

My little addition to this awesome thread

http://i281.photobucket.com/albums/kk236/svtlight04/DSC_2233.jpg
http://i281.photobucket.com/albums/kk236/svtlight04/DSC_2234.jpg
http://i281.photobucket.com/albums/kk236/svtlight04/DSC_2239.jpg
http://i281.photobucket.com/albums/kk236/svtlight04/DSC_2246.jpg

dfjaws

03-04-13, 10:26

New project for today...

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/479823_10151580739392784_1635439270_n.jpg

ALCOAR

03-04-13, 10:51

Chuck F**king Norris & 30rd Pmags .......... fill in your own captions:cool:

http://i888.photobucket.com/albums/ac81/trident1982/bb156c3c-c0c5-42bf-adb6-45498a2073c9_zps67f2de5c.jpg

arjohnson

03-04-13, 11:12

My long range rig.

http://img.photobucket.com/albums/v441/arjohnson/106_1523_zps4dc8aaf0.jpg

http://img.photobucket.com/albums/v441/arjohnson/106_1518_zps9f7ad7a3.jpg

fallenromeo

03-04-13, 11:35

Damn Tootsies. That Elcan gives me a serious chub.

munch520

03-04-13, 11:46

Damn Tootsies. That Elcan gives me a serious chub.

So does that picture. Pants got tighter

CoryCop25

03-04-13, 12:31

Chuck F**king Norris & 30rd Pmags .......... fill in your own captions:cool:

http://i888.photobucket.com/albums/ac81/trident1982/bb156c3c-c0c5-42bf-adb6-45498a2073c9_zps67f2de5c.jpg

Magpul Effin Pmags..... Chuck Norris Approved...... *uck Colorado

Pic thread:

http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/71A3B99C-B290-4C2C-AC32-597AD4B5093F-3486-000002404369C8AE_zpsb615062e.jpg

jaxman7

03-04-13, 13:30

Pic thread:

http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/71A3B99C-B290-4C2C-AC32-597AD4B5093F-3486-000002404369C8AE_zpsb615062e.jpg

Predator drone POV. ;)

ASH556

03-04-13, 13:47

Magpul Effin Pmags..... Chuck Norris Approved...... *uck Colorado

Pic thread:

http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/71A3B99C-B290-4C2C-AC32-597AD4B5093F-3486-000002404369C8AE_zpsb615062e.jpg

The perspective is throwing me a bit. Is that the MK18 or M4A1 RIS? If M4A1, what barrel length? 12.5?

Wormydog1724

03-04-13, 14:19

http://i416.photobucket.com/albums/pp247/wormydog1724/324c28e8-e8e0-45c0-9cca-65f9343869ed_zpsb3839502.jpg

CoryCop25

03-04-13, 14:34

The perspective is throwing me a bit. Is that the MK18 or M4A1 RIS? If M4A1, what barrel length? 12.5?

Very good, sir.
M4A1 Block II clonish with a 12.5 crusader barrel.

firepolock

03-04-13, 15:08

kenndapp

03-04-13, 16:12

The perspective is throwing me a bit. Is that the MK18 or M4A1 RIS? If M4A1, what barrel length? 12.5?

yeah, lets see more of that rifle! i am a sucker for rail systems leading all the way up to the threads of the muzzle.

Bizzarolibe

03-04-13, 16:27

Made some mods to the collection recently...

http://i40.photobucket.com/albums/e236/Snarky15/post20003_zps4ee73269.jpg

jaxman7

03-04-13, 16:39

http://i416.photobucket.com/albums/pp247/wormydog1724/324c28e8-e8e0-45c0-9cca-65f9343869ed_zpsb3839502.jpg

Pretty cool shot Wormy

Am I the only person who has broken a Gunfighter yet?

-Jax

ASH556

03-04-13, 17:35

Pretty cool shot Wormy

Am I the only person who has broken a Gunfighter yet?

-Jax

How'd you do that? Pics?

http://i854.photobucket.com/albums/ab104/ASH556/NightSBR.jpg

jaxman7

03-04-13, 18:12

How'd you do that? Pics?

No, unfortunately I sure don't have any pics. There is another member on here that can vouch for me. We were doing some shooting the day before a class when it broke.

I noticed through my peripheral vision while shooting, my charging handle was moving.

Upon a closer look the latch was completely gone. Not partially broken. Gone.

*There's a lesson for you kids-keep spares of everything. This was the day before a carbine class*

Whats weird is that the roll pin was still intact. Some how the latch just cleanly broke away from the CH. I looked and looked for that broken latch. I really wanted to see how and where it decided to divorce itself from the handle.

Never did find it.

BCM ,no surprise, sent me a new one after I sent them mine. From me sending Bravo mine to when the new CH was in my mailbox was 1 week. Impressive but I expect nothing else from BCM.

FYI: This was a 1st gen model.

-Jax

deviljon

03-04-13, 20:03

http://i53.photobucket.com/albums/g71/j0ny4ng/20130302_193331_20130303094154717.jpg

FAB45

03-04-13, 20:19

http://i1252.photobucket.com/albums/hh579/GEARS45/IMG_1178_zps473f3441.jpg

86 slo-vo

03-04-13, 20:42

Decided to cerakote mine Saturday. Still need to spray the x300 and aimpoint.

Before:
http://i94.photobucket.com/albums/l106/jonhagan490/guns/87DD1541-084F-42BD-A9AC-D96A2E4FEA27-15829-00000B11691840A4.jpg

After.
http://i94.photobucket.com/albums/l106/jonhagan490/guns/e38be0f17313b61f0cec26ee45e54f33.jpg

Wormydog1724

03-04-13, 21:14

Pretty cool shot Wormy

-Jax

Thank you!

Here's another with a different focus.

http://i416.photobucket.com/albums/pp247/wormydog1724/2913650c-2ae9-4cc7-8349-88331e22ed8f_zps335ac1a8.jpg

QuietRiot

03-04-13, 23:48

Chuck F**king Norris & 30rd Pmags .......... fill in your own captions:cool:

http://i888.photobucket.com/albums/ac81/trident1982/bb156c3c-c0c5-42bf-adb6-45498a2073c9_zps67f2de5c.jpg

Chuck Norris uses PMAGS for salt and pepper shakers: And when he's finished eating says "Mmm, 556 really brings out the flavor of the meat!"

js213

03-05-13, 00:02

Decided to cerakote mine Saturday. Still need to spray the x300 and aimpoint.

After.
http://i94.photobucket.com/albums/l106/jonhagan490/guns/e38be0f17313b61f0cec26ee45e54f33.jpg

I really love that color on the receivers. What color is it? Great looking rifle.

I've got a Mega billet set and DD rail I'm looking to Cerakote.

texasmarine022003

03-05-13, 05:13

http://i1167.photobucket.com/albums/q624/texasmarine022003/ko_zps36ba44e0.jpg

jaxman7

03-05-13, 07:39

After.
http://i94.photobucket.com/albums/l106/jonhagan490/guns/e38be0f17313b61f0cec26ee45e54f33.jpg

LIKE that brown!

-Jax

jaxman7

03-05-13, 14:24

jwperry

03-05-13, 14:47

http://i907.photobucket.com/albums/ac279/jaxman7/2013-03-05_14-21-30_387_zps55041d23.jpg

Nobody give me hard time about the delta ring snap ring being in the wrong position. ;) I don't have the gas tube in place so this is just a mock up until my new torque wrench comes in the mail.

-Jax

IO Aimpoint cover, VLTOR upper, BCM Bolt Carrier.....HOARDER!!

pic thread.
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/2EF3C2A7-3077-48C3-B141-C3B27790C78A-86737-000017A2F9B74C12.jpg
$150 PMAGs at the gun show in January..

jaxman7

03-05-13, 14:53

But but its just a mock up of a hoard!!!

Now that was just funny bud!

$150 PMAGS....that upsets me just as much as $75 500 rd .22 bricks I saw @ the laat gun show. :angry:

-Jax

VIP3R 237

03-05-13, 15:26

jaxman are you by chance a lefty?

No, unfortunately I sure don't have any pics. There is another member on here that can vouch for me. We were doing some shooting the day before a class when it broke.

I noticed through my peripheral vision while shooting, my charging handle was moving.

Upon a closer look the latch was completely gone. Not partially broken. Gone.

*There's a lesson for you kids-keep spares of everything. This was the day before a carbine class*

Whats weird is that the roll pin was still intact. Some how the latch just cleanly broke away from the CH. I looked and looked for that broken latch. I really wanted to see how and where it decided to divorce itself from the handle.

Never did find it.

BCM ,no surprise, sent me a new one after I sent them mine. From me sending Bravo mine to when the new CH was in my mailbox was 1 week. Impressive but I expect nothing else from BCM.

FYI: This was a 1st gen model.

-Jax

Moose-Knuckle

03-05-13, 15:30

pic thread.
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/2EF3C2A7-3077-48C3-B141-C3B27790C78A-86737-000017A2F9B74C12.jpg
$150 PMAGs at the gun show in January..

This is exactly why I stopped frequenting gun shows years ago. :rolleyes:

jwperry

03-05-13, 15:57

This is exactly why I stopped frequenting gun shows years ago. :rolleyes:

I just wanted to see the crazy...a mile long line and the fire marshal issuing reimbursements for people to leave due to over capacity was an interesting sight.
But, there is a guy there who sells AR/M1C/M1 parts for a good price and didn't boost anything on his table even though the rest of the show was 300%-1500% over their normally high prices for black rifles and thier components.

pic thread.
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/39841E01-F3BA-411B-9CA9-827A40B35A31-29001-00000839D57DD055_zpsab2e26c0.jpg

jaxman7

03-05-13, 16:21

jaxman are you by chance a lefty?

No sir. I shoot like a normal person. :D

I do shoot alot left handed though. Quite comfortable with it.

-Jax

fail wagon

03-05-13, 17:44

Half ass iPhone pictures, I chose the rifle over a DSLR

http://i52.photobucket.com/albums/g29/sirbikealot7/7e157f39-16b7-4c45-85d6-a806fc7d9947.jpg

http://i52.photobucket.com/albums/g29/sirbikealot7/B1DD3152-AFD9-4479-A55A-CCB777D366CF-3079-000001B1ED03C4D2.jpg

kyrin88

03-05-13, 18:14

http://i416.photobucket.com/albums/pp247/wormydog1724/324c28e8-e8e0-45c0-9cca-65f9343869ed_zpsb3839502.jpg

Is you castle nut on backwards?

Warp

03-05-13, 18:16

Is you castle nut on backwards?

lol

Good catch. It sure looks like it!

kyrin88

03-05-13, 18:19

Either that, or the notch is blocked by the charging handle.

ScatmanCrothers

03-05-13, 18:24

Either that, or the notch is blocked by the charging handle.

This. Looks too small in that closeup to be a notch. Staked on the *other side or not at all maybe?

86 slo-vo

03-05-13, 18:52

I really love that color on the receivers. What color is it? Great looking rifle.

I've got a Mega billet set and DD rail I'm looking to Cerakote.

Patriot brown on the reciever and magpul FDE on everything else.

Going to get the aimpoint and x300 sprayed tomorrow.

Wormydog1724

03-05-13, 19:26

Damn I became popular all the sudden.

Yes my castle nut is on correct. No it is not staked. Its a complete BCM lower and came staked from BCM, I un-staked it when I put the Magpul ASAP on and never got around to re-staking it.

Pic so you know daddy isn't lying. :lol:

http://i416.photobucket.com/albums/pp247/wormydog1724/86fb71de-eb0e-4c7e-89b1-b1c4829cae7e_zps9b09b428.jpg

Riddle

03-05-13, 22:30

heres a top pov pic . i wish i used more than just garage lights but whatever
http://i50.tinypic.com/2jceknm.jpg

Hemoglobin

03-05-13, 23:13

http://i1203.photobucket.com/albums/bb387/parsons180/th_image_zps63453ffd.jpg (http://s1203.beta.photobucket.com/user/parsons180/media/image_zps63453ffd.jpg.html)

Sent from my iPad using Tapatalk HD

^Rb

03-05-13, 23:13

http://i16.photobucket.com/albums/b26/takeabao/44301a27-f4bd-45e1-98dc-4832595c5b2a_zpsaefff412.jpg

NeoNeanderthal

03-05-13, 23:15

Dig the pick riddle, looks like it is floating in front of a wall!

Sean W.

03-05-13, 23:50

Nice carbine Rb. I'm thinking of changing over to a rifle buffer also. Have you had a chance to shoot it?

^Rb

03-06-13, 11:51

Nice carbine Rb. I'm thinking of changing over to a rifle buffer also. Have you had a chance to shoot it?

Appreciate the compliment.
Have only shot minimal rounds through it (for obvious reasons).
For the shot selection I built this gun for, the fixed stock / rifle buffer + midlength gas is great. Super smooth -- I'm very pleased with it.

maddy345

03-06-13, 16:25

This started life as a regular Colt6920. I've added:

MI FF FSB rail
Surefire M951 on a Thorntail offset mount with a SR07 switch
Eotech EXPS -2
Magpul BUIS
KAC Handstop
DD QD Swivel endplate
BFG VCAS sling
stippled MOE grip

The only other thing I may do is swap the Rogers Super-Stok for a Magpul STR for the higher QD connection. I'm not a fan of how low the QD connection is on the Rogers.

How did I do?

http://i214.photobucket.com/albums/cc286/Krankypants/P1000736_zps6b55eb70.jpg
http://i214.photobucket.com/albums/cc286/Krankypants/P1000739_zps38bfe09c.jpg
http://i214.photobucket.com/albums/cc286/Krankypants/P1000735_zpsf54a2643.jpg
http://i214.photobucket.com/albums/cc286/Krankypants/P1000734_zpsecde1696.jpg
http://i214.photobucket.com/albums/cc286/Krankypants/P1000732_zps041503a0.jpg
http://i214.photobucket.com/albums/cc286/Krankypants/P1000728_zps8512e83b.jpg
http://i214.photobucket.com/albums/cc286/Krankypants/P1000727_zps72de50fa.jpg
http://i214.photobucket.com/albums/cc286/Krankypants/P1000725_zps638add6b.jpg
http://i214.photobucket.com/albums/cc286/Krankypants/P1000726_zpsa4f2469f.jpg
http://i214.photobucket.com/albums/cc286/Krankypants/P1000724_zps429373d5.jpg

RIDE

03-06-13, 19:38

Some MRP Goodness..

http://farm9.staticflickr.com/8090/8536891024_a0791ed40c_b.jpg

http://farm9.staticflickr.com/8379/8535785557_8911caab48_b.jpg

http://farm9.staticflickr.com/8531/8536891044_d4a5e47b2f_b.jpg

http://farm9.staticflickr.com/8227/8535785613_9fd9de3f8b_b.jpg

Wormydog1724

03-06-13, 20:23

http://i416.photobucket.com/albums/pp247/wormydog1724/99529c82-9112-42db-a42c-a8f6e3afc54d_zps563c0b0e.jpg

Onyx Z

03-06-13, 22:14

My homebuilt 300BLK upper on my M&P lower:

https://www.m4carbine.net/attachment.php?attachmentid=15772&stc=1&d=1362629583

Better pics to come with daylight...

SKULL1

03-06-13, 22:47

Afghan John ( In memory of John Noveske)

Cerakoated with Metallic Gray

http://farm9.staticflickr.com/8242/8536134968_6e38694114_b.jpg

HawaiianM4

03-07-13, 01:45

IO Aimpoint cover, VLTOR upper, BCM Bolt Carrier.....HOARDER!!

pic thread.
http://i629.photobucket.com/albums/uu18/jwperry/Viewable%20Photos/2EF3C2A7-3077-48C3-B141-C3B27790C78A-86737-000017A2F9B74C12.jpg
$150 PMAGs at the gun show in January..
that is completely wrong. I don't like price gouging.

myv6

03-07-13, 02:29

^Rb - Nice stick, i think i've seen it somewhere recently, ARRRBEEE.

Pic thread.

http://i.imgur.com/BIsVz.jpg

MrDeedz

03-07-13, 04:37

http://i1090.photobucket.com/albums/i368/Razerwire69/100_0581.jpg

Gunzilla

03-07-13, 09:28

Afghan John ( In memory of John Noveske)

Cerakoated with Metallic Gray

http://farm9.staticflickr.com/8242/8536134968_6e38694114_b.jpg

Skull, AWESOME set-up!!! Hope to build one like that someday....until then I'll have to settle for these:

BCM uppers with LMT lower on one and Milspec parts in an RRA lower on the black rifle.

http://i108.photobucket.com/albums/n8/eurowannabe/pieces/DSCN0996_zps2d6f9786.jpg

http://i108.photobucket.com/albums/n8/eurowannabe/pieces/DSCN1012_zpsea6b5595.jpg

Jer

03-07-13, 10:23

that is completely wrong. I don't like price gouging.

...said no capitalist ever.

munch520

03-07-13, 12:06

...said no capitalist ever.

He can be a capitalist and still not 'like' it.

Pic thread

http://i163.photobucket.com/albums/t294/myersma2/Carrier/E768C7D0-4899-401C-8161-08056788D606-508-0000002AEFFF0CD7_zpseade55ff.jpg

Jer

03-07-13, 12:21

He can be a capitalist and still not 'like' it.

A true Capitalist doesn't try to pass socialistic ideas as Capitalistic terms. People have the choice to buy or not. If people choose not to buy the seller must lower price if they wish to sell. If buyers buy then THEY determine the value to them and set market price. This isn't difficult economics ideas here folks.

I'm more wondering why someone quoted an old post in a picture thread to make their personal agenda known.

BTW, this is a good place to end BOTH conversations since I'm right and this is a picture thread. :cool:

https://lh3.googleusercontent.com/-LBdRr-qhzF8/TfeIrtUJxjI/AAAAAAAAB60/oGSaZrV-s-I/s640/IMG00268-20090724-1841.jpg

MrDeedz

03-07-13, 12:45

Skull, AWESOME set-up!!! Hope to build one like that someday....until then I'll have to settle for these:

BCM uppers with LMT lower on one and Milspec parts in an RRA lower on the black rifle.

http://i108.photobucket.com/albums/n8/eurowannabe/pieces/DSCN0996_zps2d6f9786.jpg

http://i108.photobucket.com/albums/n8/eurowannabe/pieces/DSCN1012_zpsea6b5595.jpg

I really like the OD very sharp

munch520

03-07-13, 13:04

BTW, this is a good place to end BOTH conversations since I'm right and this is a picture thread. :cool:

https://lh3.googleusercontent.com/-LBdRr-qhzF8/TfeIrtUJxjI/AAAAAAAAB60/oGSaZrV-s-I/s640/IMG00268-20090724-1841.jpg

:laugh:

BCmJUnKie

03-07-13, 13:10

http://i1087.photobucket.com/albums/j468/Danger131/MiSSioNCaPabLE_zps9e991b73.jpg

^Rb

03-07-13, 13:39

^Rb - Nice stick, i think i've seen it somewhere recently, ARRRBEEE.

;)

Greetings fellow Redditor!

DasBulk

03-07-13, 16:53

http://i1197.photobucket.com/albums/aa433/DarynRodriguez/B3733072-5CB8-4C9D-8B1B-13807224D491-298-00000013E385F33F_zps148a187e.jpg

Koshinn

03-07-13, 17:16

http://img.tapatalk.com/d/13/03/08/zugu9asy.jpg
American Shooters in Las Vegas today. An obscene amount of pmag m2, m2 windowed, m3, and m3 windowed.

Also a $155 hk417 mag.

skeebinz

03-07-13, 19:26

http://i47.tinypic.com/2yuiseb.jpg

RIDE

03-07-13, 19:52

http://img.tapatalk.com/d/13/03/08/zugu9asy.jpg
American Shooters in Las Vegas today. An obscene amount of pmag m2, m2 windowed, m3, and m3 windowed.

Also a $155 hk417 mag.

Pmags at reg. MSRP pricing or hysteria pricing?

Honorthecall81

03-07-13, 20:01

He can be a capitalist and still not 'like' it.

Pic thread

http://i163.photobucket.com/albums/t294/myersma2/Carrier/E768C7D0-4899-401C-8161-08056788D606-508-0000002AEFFF0CD7_zpseade55ff.jpg

Imitation is flattery. Did I come close? I gotta get a real camera
though
https://www.m4carbine.net/picture.php?albumid=641&pictureid=3196

SKULL1

03-07-13, 20:48

Skull, AWESOME set-up!!! Hope to build one like that someday....until then I'll have to settle for these:

thanks,, you have an awesome set up too...:cool:

don't judge me... i like Salmon color...:lol:

http://farm9.staticflickr.com/8373/8537542847_96bcdfd309_b.jpg

RIDE

03-07-13, 20:56

thanks,, you have an awesome set up too...:cool:

don't judge me... i like Salmon color...:lol:

http://farm9.staticflickr.com/8373/8537542847_96bcdfd309_b.jpg

Maybe it's my monitor... but that ain't salmon haha!!
I like that "hit it" sticker in the bg. :)

9111B

03-07-13, 21:03

http://farm9.staticflickr.com/8505/8538640456_c188ba34da_b.jpg (http://www.flickr.com/photos/74632166@N04/8538640456/)
M4 (http://www.flickr.com/photos/74632166@N04/8538640456/) by KKloppe (http://www.flickr.com/people/74632166@N04/), on Flickr

DPMS Lite16 A3
EOTech XPS2
Timney Trigger
Daniel Defense Omega 7 Rail
PWS Buffer Tube with QD Points
Magpul CTR Buttstock with Enhanced Rubber Buttpad
Magpul MIAD Rifle Grip
Magpul RVG Front Grip
Magpul MS2 Sling
Magpul Enhanced Trigger Guard

jwfuhrman

03-08-13, 00:12

The "Crew"

Gamer Gun:

18in BCM SS410
AP Customs 15in tactical carbon fiber
Vortex PST 1-4 MRad
BC 1.0
Gunfighter Mod 1 Grip
Gunfighter Mod 4 CH
BCM BCG
MagPul STR
H3 Buffer

The lower isn't finished yet, I have on the way Geissele SD3G trigger, then I'll put the rest on. Its an Anderson Manufacturing Lower, pretty nice actually.

http://i6.photobucket.com/albums/y201/paintballaddict/D84A23CB-F9A2-46BD-9057-04CA91C6F0CE-22145-0000026966F64D25_zps5620d785.jpg

SPR:

18in BCM SS410
Troy 15in FDE Alpha
BCM BCG
Surefire MB556K
Gunfighter Mod 4 CH
Harris 9-13
Leupold Mark 4 2.5-8 M2 TMR
Geissele SSA
Magpul PRS
TangoDown grip

http://i6.photobucket.com/albums/y201/paintballaddict/BBC1568C-E6C2-4535-9AB3-AE13850EF696-22145-0000026941F03C79_zps86dda0d5.jpg

Mk18

Bushmaster 16in Carbine barrel cut down to 10.5"(gas port opened to 070)
BCM BCG
H Buffer
ACT Trigger
Gunfighter Mod 0 Comp
Gunfighter Mod 1 Grip
Gunfighter Mod 4 CH
DD 7" Lite Rail
AFG2
Trijicon Front and Rear
MBus Gen 2 rear
EOTech 516

http://i6.photobucket.com/albums/y201/paintballaddict/DFBFCF43-D056-4368-AAC1-5A3D7486BD2D-24715-000002AC8772CD8E_zps77750a28.jpg

"Black Jack" Go to gun

BCM 14.5 Mid upper
BCM BCG
Gunfighter Mod 1 Comp pinned/welded
Gunfighter Mod 1 Grip
Gunfighter Mod 4 CH
Geissele SMR 1 10in
B5 Bravo
Geissele SD3G
HSP WML and Thorntail
Leupold Mark 4 1.5-5 M2 CMR-2
Burris Fastfire 3
Troy BCM marker HK Front and Rear
Trijicon front and rear post

http://i6.photobucket.com/albums/y201/paintballaddict/30437BB5-C0CE-4A06-9032-C7D13306445E-28434-000003C987A73946_zpsc61e4a3d.jpg

SKULL1

03-08-13, 06:10

Maybe it's my monitor... but that ain't salmon haha!!

yes it is.. :lol::lol:

Pix thread:

Afghan John..
(Noveske N4 14.5 Cerakoated with Metallic Gray)

http://farm9.staticflickr.com/8518/8536192760_ab89aed580_b.jpg

Warp

03-08-13, 16:13

Colt LE6920
Trijicon Accupoint TR24G 1-4x scope
LaRue SPR-E LT-139 quick release scope mount
LaRue Cattail for TR24
Troy Rear Folding Battlesight
Surefire X300 Ultra
BattleComp 2400 FSB light mount for X300
Geissle SSA 2 stage trigger
Magpul MOE+ grip and trigger guard
Centurion C4 carbine cutout free float rail w/LaRue index clips
Magpul stubby VFG
Magpul ACS-L stock
Vickers Combat Application Sling (VCAS), padded, Coyote, Al hardware
Daniel Defense QD endplate
BCM/Vltor gunfighter charging handle Mod 4

http://i54.photobucket.com/albums/g105/austin3161324/IMG_4805_zpsbf6129ea.jpg

http://i54.photobucket.com/albums/g105/austin3161324/IMG_4811_zps16c5eae9.jpg

Honorthecall81

03-08-13, 17:46

http://m4carbine.net/picture.php?albumid=641&pictureid=3197
http://m4carbine.net/picture.php?albumid=641&pictureid=3197

skeebinz

03-08-13, 20:56

http://i45.tinypic.com/292mas7.jpg

Arteel

03-08-13, 21:13

http://i51.photobucket.com/albums/f362/DC2Projektz/IMG_1298.jpg

munch520

03-08-13, 21:27

Noveske-barreled 14.5" upper arrived today :moil: all other parts are in the mail. Don't have the cash now for the SU-230 so it'll get the same optic setup as the SBR (Aimpoint 2moa C3 + 3x magnifier)

http://i163.photobucket.com/albums/t294/myersma2/SOPMOD/01EDDD5D-02B1-4046-8781-427556357307-2392-00000104C0CF5C29_zpscf37e305.jpg
http://i163.photobucket.com/albums/t294/myersma2/SOPMOD/94CF1314-EFBE-43BF-9DB3-87B8CB478514-2392-00000104C8ECFC32_zps0cb94eef.jpg
http://i163.photobucket.com/albums/t294/myersma2/SOPMOD/338F0B56-3F15-4A0D-9ADB-2180096AF430-2392-00000104CC5D33A0_zps78473cd1.jpg

Cincinnatus

03-08-13, 21:31

It looks like a great upper, Munch. I have a sweet spot for Noveske 14.5s.:D

Noveske-barreled 14.5" upper arrived today :moil: all other parts are in the mail. Don't have the cash now for the SU-230 so it'll get the same optic setup as the SBR (Aimpoint 2moa C3 + 3x magnifier)

http://i163.photobucket.com/albums/t294/myersma2/SOPMOD/01EDDD5D-02B1-4046-8781-427556357307-2392-00000104C0CF5C29_zpscf37e305.jpg
http://i163.photobucket.com/albums/t294/myersma2/SOPMOD/94CF1314-EFBE-43BF-9DB3-87B8CB478514-2392-00000104C8ECFC32_zps0cb94eef.jpg
http://i163.photobucket.com/albums/t294/myersma2/SOPMOD/338F0B56-3F15-4A0D-9ADB-2180096AF430-2392-00000104CC5D33A0_zps78473cd1.jpg

munch520

03-08-13, 21:43

It looks like a great upper, Munch. I have a sweet spot for Noveske 14.5s.:D

Thanks, I've always wanted one and when I saw this pop up for sale (with DD BCG and Noveske marked gunfighter CH) I had to have it. A big "thanks" was sent up to John for this kickass barrel!

It'll be icing on the cake when the SF suppressor clears and I can use it with this.

jonconsiglio

03-08-13, 22:34

Thanks, I've always wanted one and when I saw this pop up for sale (with DD BCG and Noveske marked gunfighter CH) I had to have it. A big "thanks" was sent up to John for this kickass barrel!

It'll be icing on the cake when the SF suppressor clears and I can use it with this.

Now we'll have matching rifles when you cme down for some more hog murdering. That RIS II just feels right.

munch520

03-09-13, 07:49

Now we'll have matching rifles when you cme down for some more hog murdering. That RIS II just feels right.

Indeed it does. Glad I can bring my own shit with me next time, so you don't get stuck with an AK :laugh: I'm pretty sure the can should be approved by late May for he next hunt.

http://i163.photobucket.com/albums/t294/myersma2/11-3-12/255078D8-B9F6-469F-A0C2-399ED8C50A9F-790-0000001F1B84D02F.jpg

Brassmaster

03-09-13, 08:22

Sorry, my attachment did not show . I'll try to figure out why.

jonconsiglio

03-09-13, 09:06

Indeed it does. Glad I can bring my own shit with me next time, so you don't get stuck with an AK :laugh: I'm pretty sure the can should be approved by late May for he next hunt.

Not just an AK, but one hitting 6 feet high and 3 feet left that you've not even seen until it's dark and time to go. That's the last time I take someone's word that an optic is zeroed.

I'm thinking hard about a 9" 300blk for the next time we go. I could have brought the SCAR H, but I couldn't find any decent ammo plus it's a bit bulkier than the 14.5" I typically hunt with. Also, I think it's getting sold.

Time to start stocking up on 70gr TSX!

Here's that hunting album with a couple pics from the hog hunt that we took Munch520 on. Ignore the finger through the zipper of my buddy Tim....

http://www.flickr.com/photos/24925870@N00/sets/72157632850883813/

Sentaruu

03-09-13, 09:11

thanks,, you have an awesome set up too...:cool:

don't judge me... i like Salmon color...:lol:

http://farm9.staticflickr.com/8373/8537542847_96bcdfd309_b.jpg

my fiance would love that color rifle :lol:

FireandFlames

03-09-13, 09:22

Sopmod master race reporting in. Munch, now we will look even more ridiculous at the range. Matching ranger hoodies, matching glocks, matching PC's, and matching rifles. :lol:

http://i50.tinypic.com/2rgcpr7.jpg

SKULL1

03-09-13, 09:24

my fiance would love that color rifle :lol:

wife.. not satisfied.. she want's to snakeskin the pistol grip and stock:lol:

COLORS..

http://farm9.staticflickr.com/8108/8538759622_6ca5570d38_b.jpg

munch520

03-09-13, 09:50

Not just an AK, but one hitting 6 feet high and 3 feet left that you've not even seen until it's dark and time to go. That's the last time I take someone's word that an optic is zeroed.

I'm thinking hard about a 9" 300blk for the next time we go. I could have brought the SCAR H, but I couldn't find any decent ammo plus it's a bit bulkier than the 14.5" I typically hunt with. Also, I think it's getting sold.

Time to start stocking up on 70gr TSX!

Here's that hunting album with a couple pics from the hog hunt that we took Munch520 on. Ignore the finger through the zipper of my buddy Tim....

http://www.flickr.com/photos/24925870@N00/sets/72157632850883813/

Haha yea that thing was all over the place! Multi reticle, multi color optic probably didn't help maintain that 'zero'.

Yeah if the H sells, should be able to set up a sick 300!

Thousands of rounds are getting loaded next week! 70gr among those.

Sopmod master race reporting in. Munch, now we will look even more ridiculous at the range. Matching ranger hoodies, matching glocks, matching PC's, and matching rifles. :lol:

http://i50.tinypic.com/2rgcpr7.jpg

:laugh: sopmod master race. I can't even fathom the unwanted attention PCs would generate at our local range.

http://i163.photobucket.com/albums/t294/myersma2/BCADE9A0-2A9B-4E91-9ABE-CD39AC1418B1-3049-000001429628C093_zps6edec1b2.jpg

FireandFlames

03-09-13, 10:09

:laugh: sopmod master race. I can't even fathom the unwanted attention PCs would generate at our local range.

Haters gonna hate.

http://i46.tinypic.com/34j5gmo.jpg

Carbine pic so I dont get scolded :P

http://i47.tinypic.com/2z8n2ua.jpg

jonconsiglio

03-09-13, 10:24

Haha yea that thing was all over the place! Multi reticle, multi color optic probably didn't help maintain that 'zero'.

Yeah if the H sells, should be able to set up a sick 300!

Thousands of rounds are getting loaded next week! 70gr among those.

:laugh: sopmod master race. I can't even fathom the unwanted attention PCs would generate at our local range.

I swear to God that if I find out you're wearing a plate carrier to a static indoor range for no reason than just to wear it, you will no longer be allowed to hunt in South Texas!!

I'll throw down on the SOPMOD/RIS II combo.... for now.

Back when it was new, before painting....

http://farm8.staticflickr.com/7052/7089446733_43e5bd08ac_b.jpg

Yeah, that AK was everywhere. At 200 yards on that steel, I had to hold something like 6 feet low then a few feet right. No wonder I missed that group of like 30 piggies!! I'm still pissed about that!

munch520

03-09-13, 10:36

Coltdogg

03-09-13, 11:30

Here are a few of my nicer guns ARs.

Not all Colts, but here is a few of my nicer guns.'

Top to down
Colt LE6933 11.5 with Knights M4 RAS
Colt LE6920 16.1 with Knights M4 RAS and KAC Trigger
Knights LPR 18.0 ALL FACTORY gun. with AAC M4 2000
Colt R6600 H-Bar 20.0 with Knights M5 RAS and KAC Trigger

http://i772.photobucket.com/albums/yy6/HK-Dogg/ColtARs001_zps5565f62c.jpg
http://i772.photobucket.com/albums/yy6/HK-Dogg/ColtARs003_zpsb988da7e.jpg

Hope you like.

Wormydog1724

03-09-13, 11:41

Haha he was kidding. We have actually talked about getting out to my farm to shoot/move and get used to the carriers. But hell no not a public range.

ETA: pic thread. This is about as kitted up as I get for the public range.
http://i163.photobucket.com/albums/t294/myersma2/10-7%20Range/IMG_355212132333333-1.jpg[/IMG]

Some of the idiots I've seen at public ranges here in Okla make me want to wear a plate carrier for my own safety. Lol. Just because they own a bunch of nice guns AR's does not mean they know how to shoot or are safe doing it. Thank god I have my own land to shoot on and only go to ranges for matches. And luckily matches seem to scare away most fudds because they're afraid of being embarrassed by their lack of skills. A guy looks really dumb with a nice AR and can't shoot the damn thing. Lol.

My MK18 RIS II fun gun. I keep switching between the sopmod and CTR. I just can't decide which I like better.

http://i416.photobucket.com/albums/pp247/wormydog1724/D8930AEB-C68D-4B20-BB14-5DC8F02DCEFE-2665-0000031FC7EE1654_zps7cc8d313.jpg

buckjay

03-09-13, 13:39

Some of the idiots I've seen at public ranges here in Okla make me want to wear a plate carrier for my own safety. Lol. Just because they own a bunch of nice guns AR's does not mean they know how to shoot or are safe doing it. Thank god I have my own land to shoot on and only go to ranges for matches. And luckily matches seem to scare away most fudds because they're afraid of being embarrassed by their lack of skills. A guy looks really dumb with a nice AR and can't shoot the damn thing. Lol.

My MK18 RIS II fun gun. I keep switching between the sopmod and CTR. I just can't decide which I like better.

http://i416.photobucket.com/albums/pp247/wormydog1724/D8930AEB-C68D-4B20-BB14-5DC8F02DCEFE-2665-0000031FC7EE1654_zps7cc8d313.jpg

You ever try a Vltor I-Mod? I've tried all of the above and its the best compromise imo.

Wormydog1724

03-09-13, 14:13

You ever try a Vltor I-Mod? I've tried all of the above and its the best compromise imo.

No man I haven't tried that one. I don't think I would have a use for the clubfoot one but I might give the regular one a try. I have more stocks than I have lowers right now, maybe I could trade somebody a CTR or SOPMOD for one.