Guy who shoots pistol in home, expecting it to be less loud:
“MAWP....MAAWP”
Printable View
Guy who shoots pistol in home, expecting it to be less loud:
“MAWP....MAAWP”
Listen to Clint Smith's short video. https://youtu.be/_APnhoIYeD0
Sent from my iPhone using Tapatalk
I have a couple of suppressed shorties in 5.56. Both have an Omega with the 22 caliber flat cap. I find their report much more comfortable than from an unsuppressed 9mm or 45 ACP or any standard unsuppressed centerfire pistol caliber.
Iron sights are a matter of opinion. I shoot a shorty out to 300 yards or more using just an Aimpoint Micro. I don't use a magnified optic because I don't want the extra weight on either shorty. Neither shorty uses iron sights because a front sight interferes with mounting a flashlight in the 12 o'clock position. I've been running an Aimpoint Micro for a few years, fair weather, cold weather, rain, sleet and snow. Not once have I ever said to myself "Boy, am I glad I have BUIS!" Usually, my thought has been "I could see better without that damned front sight in the way!"
With iron sights, a 1/3 lower co-witness mount works better than an absolute co-witness mount. When looking through an RDS, I can see better with the 1/3 lower co-witness mount because I can look over the front sight for a less cluttered view.
The above is just my personal experience and is subjective. The inclusion of BUIS should be based on the needs, wants and preferences of each individual which will evolve with experience. Present the pros and cons and let your readers decide for themselves.
Below, is the real reason I want to respond to your post-
Shorties don't need special springs or buffers. They need, like any other AR, a balanced operating system. One of the softest shorties I've fired uses a carbine RE, H buffer and Colt carbine spring and that's with a suppressor. The reason it shoots soft is because the gas flow is right. It would be a disservice to your readers to have them thinking shorties need special buffers or special springs, when all any AR needs is a balanced operating system and quality springs.Quote:
2. Shorter barrels require different buffer systems than normal to operate reliably; depending on length requirements the Vltor A5, Geissele Super 42, or PWS H2+Sprinco Blue buffer systems are your best choices.
Mainly, it's because a lot of these people see me as "That Gun Guy Friend to ask for free advice"... since several have been starting to get curious about AR pistols of late, I was thinking to start them with a "primer," not so much a "detailed cookbook." I figure more in-depth followups can be future pieces, since I'm usually shooting for 600-800 word length a week. Some of these people are craftsman-types in other hobbies, so I wanted to do something a little better for their DIY and "personal touch" streaks than "buy a stripped lower and a DD Mk 18 URG, slap on an A5 buffer system plus Concussion Reduction Device and grip of choice, BOOM, done."
I sure don't walk through my house with my pistol held straight out like Clint was doing. Neat demo, but not exactly accurate. Even just shooting on a square range I am much tighter than that with my rear sight no more than 12" away from my nose.
I'm also not very concerned about a home invasion. In this area we generally only see armed home invasions to an occupied house if the house is a drug house or there is some other activity warranting that behavior. It's being out amongst the general public that's shaky.
Like this tactical guru??? :D
Tight. :p
Attachment 48993
Plenty more fail in this video. https://www.youtube.com/watch?v=sc-pQH9GSxA
But it was more of a comment to the brah who puts his pistol 12" in from of his grape than a dig on how horrible Army (and .MIL) pistol training is. Rock solid, I'm sure he kills it with recoil management! :D