Pleasantly surprised by Colt6920 + cheap bullets.

Printable View

04-04-18, 15:06
5.56 Bonded SP

Pleasantly surprised by Colt6920 + cheap bullets.

Thought I would share this load in case anyone wants to reproduce it.

https://s14.postimg.org/mw9dpk7vl/KIMG0139.jpg

https://s14.postimg.org/b9p9oafdt/IM...404_140246.jpg

Gun:
Colt 6920 + trijicon accupower

Load:
-Wolf gold brass trimmed to 1.752, headspaced near min Sammi spec.
-CCI 450 primer
-26.8gr CFE223
-Hornady 55gr varmint soft point
-C.O.A.L 2.20
-Light taper crimp

This is by no means a professional review, just thought I'd share a combo that worked surprisingly well, and I honestly did not think my gun or these bullets we're capable of this accuracy.

I had a few pounds of CFE223 laying around, I never liked this powder because it has always shot really dirty for me. Tons of fluffy carbon, absolutely filthy. I much prefer cleaner burning powders.
So I thought I would use some of it up with some cheap Hornady soft points for range fodder, and blasting rabbits with. I did not expect anything better than 2moa, and I was really just loading this stuff to get rid of this powder as a cheap blasting load. I didn't work up a load at all, I just threw together a load I knew would cycle my gun and be safe to shoot.

I shot several 5 shot groups like this at the end of the day, and was very surprised as they were shooting sub 1". I was also very surprised that these soft points shot so well out of an autoloader. My only complaint is these shot 2" high and left of the poi that most of my other loads shoot.
Great cheap load.
04-04-18, 18:07
NWPilgrim

Thx, appreciate the info. I just had loaded up a test ladder of CFE and Hornady 55 SP from 26.7 - 27.5 gr. Anxious to see how this shoots now!

In previous testing of other bullets CFE seems very similar to BL-C2 which I like a lot, and seems to do best at near max loads.

Also, testing with other powders I too was surprised at the accuracy possible with the Hornady 55 gr SP bullets. Now my favorite on the cheaper end.
04-04-18, 18:45
Stickman

Quote:

Originally Posted by 5.56 Bonded SP

Thought I would share this load in case anyone wants to reproduce it.

https://s14.postimg.org/mw9dpk7vl/KIMG0139.jpg

https://s14.postimg.org/b9p9oafdt/IM...404_140246.jpg

Gun:
Colt 6920 + trijicon accupower

Load:
-Wolf gold brass trimmed to 1.752, headspaced near min Sammi spec.
-CCI 450 primer
-26.8gr CFE223
-Hornady 55gr varmint soft point
-C.O.A.L 2.20
-Light taper crimp

This is by no means a professional review, just thought I'd share a combo that worked surprisingly well, and I honestly did not think my gun or these bullets we're capable of this accuracy.

I had a few pounds of CFE223 laying around, I never liked this powder because it has always shot really dirty for me. Tons of fluffy carbon, absolutely filthy. I much prefer cleaner burning powders.
So I thought I would use some of it up with some cheap Hornady soft points for range fodder, and blasting rabbits with. I did not expect anything better than 2moa, and I was really just loading this stuff to get rid of this powder as a cheap blasting load. I didn't work up a load at all, I just threw together a load I knew would cycle my gun and be safe to shoot.

I shot several 5 shot groups like this at the end of the day, and was very surprised as they were shooting sub 1". I was also very surprised that these soft points shot so well out of an autoloader. My only complaint is these shot 2" high and left of the poi that most of my other loads shoot.

Great cheap load.

Sounds like a solid load.
04-04-18, 19:29
5.56 Bonded SP

Quote:

Originally Posted by NWPilgrim

Thx, appreciate the info. I just had loaded up a test ladder of CFE and Hornady 55 SP from 26.7 - 27.5 gr. Anxious to see how this shoots now!

In previous testing of other bullets CFE seems very similar to BL-C2 which I like a lot, and seems to do best at near max loads.

Also, testing with other powders I too was surprised at the accuracy possible with the Hornady 55 gr SP bullets. Now my favorite on the cheaper end.

Those bullets surprised the hell out of me, they are very good. I was thinking it had to be a fluke, but I had repeated great results. I still can't believe they shot so well.

Worth note, my Colt6920 is free floated, it's just a stock Colt Trooper, with a 1-4 accupower on it.
04-04-18, 20:16
flenna

I don't reload but have found that Hornady 55 grain TAP (which is essentially their varmint round I believe) shoots cloverleafs out of my Colt 6721. Hornady makes very accurate stuff, it is all I shoot out of my .270.
04-04-18, 21:05
NWPilgrim

I think the 55 TAP uses the VMax, right? Another excellent bullet. In fact, even their 55 gr FMJ is pretty decent. I quit buying anything in 55 except Hornady. Darn good prices in bulk and way better than most of the same weight in accuracy unless you pay 50% more.
04-08-18, 17:17
mgrs

Quote:

Originally Posted by 5.56 Bonded SP

Thought I would share this load in case anyone wants to reproduce it.

Gun:
Colt 6920 + trijicon accupower

Load:
-Wolf gold brass trimmed to 1.752, headspaced near min Sammi spec.
-CCI 450 primer
-26.8gr CFE223
-Hornady 55gr varmint soft point
-C.O.A.L 2.20
-Light taper crimp

This is by no means a professional review, just thought I'd share a combo that worked surprisingly well, and I honestly did not think my gun or these bullets we're capable of this accuracy.

I had a few pounds of CFE223 laying around, I never liked this powder because it has always shot really dirty for me. Tons of fluffy carbon, absolutely filthy. I much prefer cleaner burning powders.
So I thought I would use some of it up with some cheap Hornady soft points for range fodder, and blasting rabbits with. I did not expect anything better than 2moa, and I was really just loading this stuff to get rid of this powder as a cheap blasting load. I didn't work up a load at all, I just threw together a load I knew would cycle my gun and be safe to shoot.

I shot several 5 shot groups like this at the end of the day, and was very surprised as they were shooting sub 1". I was also very surprised that these soft points shot so well out of an autoloader. My only complaint is these shot 2" high and left of the poi that most of my other loads shoot.
Great cheap load.

Thank you for sharing. Two observations:

CFE223, Alliant 2000mr, and their military variant SMP842 like to be run at high charges and pressure. In addition to .223, they can give exceptional velocity in heavy 7.62 loads. 2000mr is the slowest blend by a hair and can't be beat for speed in .308.

Colt barrels are often really good. Looking at new ones on a bore scope, they look a lot cleaner than most CL duty barrels and a lot of the less expensive 'match' SS barrels and often have ports cut in between the lands.
04-08-18, 18:22
Coal Dragger

I’ve had very nice results with CFE223. Carbon fouling is not really a deal breaker. 27.0gr under a Hornady 55gr FMJ and a CCI primer with a light taper crimp is also a nice load.
04-10-18, 14:58
mic2377

I have to chime in and say that I have had excellent accuracy in every AR I have shot them with the Hornady 55 SP. Remarkable for how cheap they are.
04-10-18, 20:14
mgrs

Quote:

Originally Posted by mic2377

I have to chime in and say that I have had excellent accuracy in every AR I have shot them with the Hornady 55 SP. Remarkable for how cheap they are.

Also yes. Love these as cheap blasting bullets that also shoot well. You'll often find the 6000ct boxes discounted. The only downside is they will dump velocity pretty fast at range.