I'd like to stock up on a couple of lower parts kits to have a good supply of various spare parts. Does anyone sell Colt LPKs, or equal quality LPKs with the bureaucrat pins?
Printable View
I'd like to stock up on a couple of lower parts kits to have a good supply of various spare parts. Does anyone sell Colt LPKs, or equal quality LPKs with the bureaucrat pins?
S.A.W. does.
http://www.specializedarmament.com/c...Parts-4-0.html
That's the only place I know of off the top of my head. I'm sure there are others, though.
Derek
Ouch, $175! I knew SAW was proud of their stuff, but that's a tough pill to swallow. Obviously, since I bought the Colt rifles to begin with I'm not averse to spending money to get good gear, but that seems excessive even to me.
Rob,
I have found the CMT/ Stag LPK to be excellent...:
http://jtacsupply.com/catalog/lower-parts-p-147.html
Mace
From the schematic it appears that they do sell everything, but I'd have to cherry-pic the parts and frankly I'd prefer to just get them all as a LPK just to be sure that everything is there.
ETA:
I went ahead and added everything they had listed except the acuwedge, pistol grip, and 9MM parts, and this is what I came up with (with discount)
160-308-100 SP62301 BOLT CATCH FOR 223/7.62 MODELS $16.00 $16.00 In Stock
160-308-102 SP95105 BOLT CATCH PIN $4.08 $4.08 In Stock
160-308-103 SP62178 BOLT CATCH PLUNGER $2.80 $2.80 In Stock
160-308-104 SP62177 BOLT CATCH SPRING $4.08 $4.08 In Stock
160-308-110 SP61582 BUFFER RETAINER $7.01 $7.01 In Stock
160-308-111 SP61694 BUFFER RETAINER SPRING $4.08 $4.08 In Stock
160-304-031 SP61564 EJECTOR FOR .223 & 7.62 MODELS $3.52 $3.52 In Stock
160-304-032 SP61569 EJECTOR SPRING/SELECTOR SPRING $3.52 $3.52 In Stock
160-308-146 SP61785 FIRE CONTROL SELECTOR DETENT $3.02 $3.02 In Stock
160-308-112 SP61604 MAG CATCH $12.49 $12.49 In Stock
160-308-130 SP62032 MAG RELEASE BUTTON $5.38 $5.38 In Stock
160-308-131 SP61759 MAG RELEASE BUTTON SPRING $3.02 $3.02 In Stock
160-308-151 SP90001 PISTOL GRIP LOCK WASHER $3.51 $3.51 In Stock
160-308-152 SP64554 PISTOL GRIP SCREW $4.56 $4.56 In Stock
160-308-121 SP66818 RECEIVER PIVIT PIN,.250" $7.02 $7.02 In Stock
160-308-120 SP66819 RECEIVER PIVOT PIN SCREW $8.37 $8.37 In Stock
160-308-140 SP61655 TAKE DOWN PIN $9.16 $9.16 In Stock
160-308-115 SP61698 TAKEDOWN PIN DETENT $3.50 $3.50 In Stock
160-308-114 SP61692 TAKEDOWN PIN DETENT SPRING $4.08 $4.08 In Stock
160-308-136 SP61970 TRIGGER GUARD ASSEMBLY $14.01 $14.01 In Stock
160-303-021 SP95101 WIND DRUM & TRIGGER GUARD PIN $2.84 $2.84 In Stock
160-308-135 SP95106 TRIGGER GUARD PIVOT PIN $2.82 $2.82 In Stock
160-308-138 SP61531 TRIGGER GUARD SPRING $2.82 $2.82 In Stock
160-308-109 SP61250 TRIGGER GUARD PLUNGER $1.76 $1.76 In Stock
Total Amount : $133.45
Still not cheap, but at least less than SAW.
Hoplite, Inc. P.O. Box 6599 Sheperdsville, KY 40165 502-955-5014
taken from brownells via the aforementioned link.
16 SP90001
160-308-151 Pistol Grip Lock Washer $4.39
That's one spendy ass lock washer!!! Yikes!!
I understand what genuine Colt parts mean, but that's a little too far out there, it must be unobtanium.
I never did wind up ordering all those parts. Thought I'd bump this in the meantime.
Ohhhhhhhhhh, I agree 100% but I just have a little trouble justifying the cost of a lock washer when it's just a washer that colt had mass produced by another company anyway.. Just my opinion.. I think the rest of the LPK I would pay extra for, but I would probably be just as happy/safe with a SS lock washer from Lowes for $00.13.. JMO.... J.:D
some of those Colt parts prices are just to silly for words!
:eek: Billy
Colt inspects the washer under the grip screw and the roll pins?
Check out what it'd cost you to assemble an entire Colt M16 bolt group! :eek:
I am working on a LMT LPK (less the trigger and A2 grip) if anyone is interested. :D
C4
It will be for sale, but won't know how much just yet.
A lot of times people do not want the following components in their LPK:
A2 Grip
Trigger/hammer
These items drive the cost a lot (well not the A2) and most people generally don't use them. So I thought I would order everything less these parts and put together a modified LPK for people that want LMT quality.
C4
sounds good.
i'd definately like to have some spare parts put back for my new LMT.
any ETA?
not that im in hurry,i wouldnt be able to pick anything up until next month at the earliest anyway.
I would buy some kits like that Grant.
Love to get a few LPK's myself...keep us updated Grant and thank you!
I also would like 1-2 sets of the LMT LPK. How much?
I'd be interested in an LMT LPKas well, with and without the FCG. Definitely not the A2 Grip.
Tack
What are you all subbing in there for the Trigger/Hammer? Some sissy two stage thing? ;)
I was actually just going to leave the triggers out for a couple reasons. The main one is that people often times switch out the trigger to something else. This way, they do not have the expense of paying for something they do not want.
I may, in the future offer LMT standard triggers for those that want them.
C4
i was just going to buy another standard trigger(like it just fine) seperately to fill out a spare parts kit.
Grant, how much for the LMT LPK including the LMT Reg. Trigger?
sounds good
Ok, I have worked up some prices. The LPK's do not include the following items:
A2 grip
A2 screw
Hammer
Trigger
Hammer/trigger pins
Price should be around $45 I think.
C4