Well, My plan was to shoot this in the 1k match I did today. But, since it came in yesterday, I went with the AI(.308) and actually did a break in on this one afterwards and then fiddled with some loads I had worked up on the AI. I will shoot this one in the August match after I tweak the Berger 185 OTM's in it. I was kind of spent at the end, but, hey suck it up and drive on.
I didn't have any FGMM with me as a control, but did have the BH's. I find the FGMM has a slight edge in my experiences. The 43 grain charge is the most accurate in the AI, looks like I might just run with the same in the FN. Honest calls on the ones marked-forgot to mark the one on the 1st group of BH's. I fired 6 rounds on the 42.5/43/43.5 loads, usually load 6 in case I have a called flier to give me five in a group. Aimed at the square and adjusted scope low to keep a clean aim point.
It can be better, I know.
Factory Black Hills 175 Match
IMR4064/FC case/FGMM primer/175SMK/2.80/full length sized on RCBS standard die/seated with a Wilson/Arbor press
42.2/42.5/43/43.5
Mark
http://img.photobucket.com/albums/v5...ps31b06868.jpg