Printable View
First off let me say it will be on my SBR. Im running a TRX.
Im going with Surefire, does anyone have the E2D Defender? It looks like a really nice light. 200 lumen, not sure if you can run a tape switch though, I dont HAVE to have a tape switch.
Second thought is the Mini-Scout...w/ tape switch, 200 lumen
Im not decided on the mount yet. Larue has good deals on lights w/mounts. I really like the E2D so far and its definatley affordable.
Any thoughts?
Tagged for info as my SBR build is in progress as well, and will get a VTAC tube and I don't want the surefire at 12 o'clock like on my 14.5 middy.
I was looking and the mini scout myself as well.
if you are looking for a scout light, you can usaually find really good prices on ebay. i found one on there for a friend and it was shipped to him for under 250. i use a 6P with a KX4 head, in a vtac mount on my DD V5...little different than a SBR, but it works well.
You can run a switch on any of the e-series lights, but it's not cheap. I have an E1B Backup set up this way, the only problem is that it's a high/low light regardless of end cap.
Unless you already have the e2d, it may be better to go with the scout (if you can get a good deal) as the e2d would need a mount and a switch set up if you wanted those capabilities, but still would have the high/low feature which can nay be fixed with a new lamp head.
I could be wrong but I believe the mini-Scout is 110 lumens.
I recommend a G2X tactical. If you don’t need an off set mount, a 1" scope ring works well.
Jimmy is correct, mini scout LED (m300a) is 110 lumens. I just picked up a mini-scout and I have a IWC mount en-route (See Here) for my VTAC TRX rail. I will post a picture once I receive the mount.
I would greatly appreciate a picture of that.Quote:
Originally Posted by Seagrave7
I am VERY tempted to sell trade the second X300 I just recently got for a mini scout to go on my SBR......
Youre absolutely right...and I knew that. Someone was talking and I had the 200 stuck in my head still lol. Thanks manQuote:
Originally Posted by Dozer
I like 6P's with Malkoff bulbs. However, the new 6PX would also be fine (I'd personally go with the single high-output as opposed to the variable). FSB mounts or offset mounts work well.
I don't like tape switches in general but if I were to run one I'd go with one of the newer Surefire ones.
I prefer single outputs as well. The FSB is not an option. I like offsets alot, I run a DD offset on the M4. I dont want another rifle with the exact same set-upQuote:
Originally Posted by Dave_M
Fire_Medic,Quote:
Originally Posted by Fire_Medic
Here's a link to pics posted by NickDrak of his 14.5" VTAC Extreme with M300A & IWC's SCOUT MOUNT-N-SLOT.
http://www.ar15.com/forums/topic.htm...f=399&t=189976
IMHO, I prefer the M300A, which projects a narrow, clean beam as far as a 200 Lumen G2X, at half the weight & bulk. Just my opinion.
MOUNT-N-SLOT
The only thng I dont like about the Mini Scout is the 110 lumens. The Z2-S I run is 160. I really want the 160 and up. Is the Mini scout pretty bright?
Well you done did it now, lol. That looks great and it's exactly what I am looking for.Quote:
Originally Posted by MOUNT-N-SLOT
Now I need to sell my NIB X300 to buy the mini scout and your mount.
:jester:
The M300A is really bright. It's in the design of the head. A couple of weeks ago, IWC drove back to CO from a Machine Gun Shoot in Wall, SD. No moon out, we stopped and did some searching with the 10.5" w/M300A & 14.5" w/G2X Tactical. There was some humidity in the air reflecting off the beams. The M300A went farther, with less side light. I personally liked it better.Quote:
Originally Posted by BCmJUnKie
It's a really sweet, rock-solid set-up.Quote:
Originally Posted by Fire_Medic
IWC offers LEO/First Responder discounts. Create your account: http://www.impactweaponscomponents.com/contact/
I'll contact you.
MOUNT-N-SLOT
Just a note on the G2X/6PX suggestions... Im not sure the "Tactical" versions of Surefire's 6PX and G2X lights are safe for weapon-mounted applications. I know the "Pro" versions are NOT. Considering that even the G2X is still $100, I see no reason to opt for one of these over a standard G2LED or 6PLED. Their output is sufficient for defensive purposes.
What's the issue?Quote:
Originally Posted by Pax
I have a G2X Tactical on a VLTOR offset mount, awesome setup IMO.
OK brother thanks, looking forward to hearing from you.Quote:
Originally Posted by MOUNT-N-SLOT
If youre looking for something similar to the M300A at a little lower cost, you can look at the VTAC mini L4. doesnt come with the pressure swich, or socketed tailcap, but if you use it in a location where those are not necessary, it can be a good cost effective compromise to the M300 scout.
Not sure if recoil could actually disable all of the light's functions, but from my experience with my 6PX Pro as a handheld light only, I can say that only minor shocks to the light while it is in low-output mode (15 lumens) will make it switch to high-output mode (200 lumens). Even if you're only putting it in your mouth, hitting your teeth often changes the output modes. Not sure if this is the only reason why Surefire recommends expressly against the use of "Pro" models on weapons or if there may be other issues to encounter. IMO not worth finding out if there may be other issues because I have no use for a dual-output weaponlight and a time-tested 6PLED is far cheaper anyways.Quote:
Originally Posted by Eric
The G2X and 6PX, tactical or PRO models, are not recommended for weapon light use, it says so right on the packaging. I don't know why people insist on using them and going against SureFire's recommendation. They do not have springs on both ends of the batteries, therefore do not provide shock resistance to batteries moving under recoil. They were intended to be used as handheld lights only.
The SF SR07 took longer then expected to receive. Definitely like this low profile IWC mount, thanks Earl.
http://i301.photobucket.com/albums/n.../IMG_5613c.jpg
http://i301.photobucket.com/albums/n.../IMG_5615b.jpg
http://i301.photobucket.com/albums/n.../IMG_5619b.jpg
[QUOTE=Seagrave7;1045547]The SF SR07 took longer then expected to receive. Definitely like this low profile IWC mount, thanks Earl.
QUOTE]
I like that mount. Thats what I want