two different uppers ,both have the key hole marking both fit a rra lower set up but one will fit the Reich racing lower ...so what the hell ???
two different uppers ,both have the key hole marking both fit a rra lower set up but one will fit the Reich racing lower ...so what the hell ???
"It is well that the people of the nation do not understand our banking and monetary system, for if they did, I believe there would be a revolution before tomorrow morning." -- Henry Ford ! when a nation turns on it's own and denies it's own founding culture ,this is a sign of the death pangs of a nation --- cz7
Where does it hit? RRA are notorious for tight lowers, if it fit RRA lower then other might be out of spec. Just the first thing that popped out at me...
^^ Read with southern accent !^^ and blame all grammatical errors on Alabama's public school system.
Technique is nothing more than failed style. Cecil B DeMented
"If you can't eat it or hump it, piss on it and walk away."-Dog
Go where the food is.
Keyhole means nothing other than the raw forging came from Cerro Forge. Manufacturers buy the raw forgings from various vendors and finish machine them to their specs.
This is your answer, the keyhole marking is nearly meaningless to the size and fit and finish of the receiver.
I'll give you an idea of quality control. Two lowers from one manufacturer. One absolutely would not fit the Noveske Ambi safety, the other marked in the very next serial number, assumingly manufactured at the same time by the same people in the same factories, fit in with no problem.
Something is out of spec or may be within spec, and tolerances are stacking. What exactly is preventing the fit? I assume the front pivot pin fits snug but the rear take down pin won't penetrate through the receivers, or something else?
-Thomas
Member, ISRA; Life Member, NRA; USCCA Certified Instructor; NRA Certified Instructor, AGI Certified Gunsmith, Illinois Concealed Carry Instructor
www.alphakoncepts.com www.gunrights4illinois.com
4 different lowers and 3 different uppers ,where swapped around ...and the most damning thing was found not one was close to one set of specs ...like the take down hole[center] of the upper to base of the center .250 is spec to diagram found on the web ...you mix them up some will wiggle ,others will not close ,and another very tight lock up rra,colt,mega s/w lowers uppers rra mega s/w....cant we have a set specs for all to be the same .......
"It is well that the people of the nation do not understand our banking and monetary system, for if they did, I believe there would be a revolution before tomorrow morning." -- Henry Ford ! when a nation turns on it's own and denies it's own founding culture ,this is a sign of the death pangs of a nation --- cz7
Bookmarks