We used to pop our M16A2 handguards off in drill when we were in Boot Camp all the time. Never saw why they were a viable option for mounting things too. BUT, if you must, then the IWC is IMO the way to go.
We used to pop our M16A2 handguards off in drill when we were in Boot Camp all the time. Never saw why they were a viable option for mounting things too. BUT, if you must, then the IWC is IMO the way to go.
I'm looking at setting up a KISS upper and found these Blue Force Gear wire loops with QD slots. http://www.blueforcegear.com/univers...button-socket/
That's what I figured. I have had a UTG railed handguard in the past and in all honesty it was fine for a cheap handguard, but if I have to add QD sockets to it I might as well keep the A2 or get the MOE and install the IWC Micro sockets, since I don't really need to hang anything off of it.
Sorry to necropost, but I've stumbled into the same issue and had a question...
Would drilling and mounting the QD socket/cup farther aft, near the delta ring and barrel nut, be a little more secure and less prone to "pop" the handguard out of the cap? I have a KISS setup with standard furniture, and want to keep it that way, save for the QD socket/cup already in the A1 stock.
Last edited by Dionysusigma; 05-28-17 at 23:14.
... anyone?
Bookmarks