MI-SSK Midwest Industries Gen-2 SS Free Float KeyMod

[ucrt]

.

There is a supplied adhesive that is applied between the rail and the barrel nut during rail installation.

.

[Midwest Industries]

Yes that is included.
TROY
MI

[TehLlama]

I've been trying to find it, since I'm looking at a 16" LR-308 barreled setup, what is the OAL for the 15" model?
I'm specifically looking at running an SAS Reaper on this rifle, maybe thread-on otherwise thread over MB.

[ETA] Saw a few pages deep on TOS that the 10.5 will cover a LP GB on a middy by 0.050", that the 12" model is 12 5/8" (12.625"), and that the 15" is a true 15") - I'd still like to verify OAL on the 15.
http://midwestindustriesinc.com/imag...ssk_keymod.jpg for weight references.

[Figure4LegLokk]

I've been trying to find it, since I'm looking at a 16" LR-308 barreled setup, what is the OAL for the 15" model?
I'm specifically looking at running an SAS Reaper on this rifle, maybe thread-on otherwise thread over MB.

[ETA] Saw a few pages deep on TOS that the 10.5 will cover a LP GB on a middy by 0.050", that the 12" model is 12 5/8" (12.625"), and that the 15" is a true 15") - I'd still like to verify OAL on the 15.
http://midwestindustriesinc.com/imag...ssk_keymod.jpg for weight references.

I'm also wondering if the 12 5/8" will fit on the rifle length/dissipator barrels with FSB.