Results 1 to 10 of 17

Thread: MK 248 MOD 1

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2011
    Posts
    194
    Feedback Score
    1 (100%)

    MK 248 MOD 1

    Has anyone loaded their own 300 Win mag to the mk 248 mod 1 specs? And, what is the brass life that you have encountered?


    jpgm

  2. #2
    Join Date
    Apr 2008
    Location
    NW Iowa
    Posts
    721
    Feedback Score
    0
    A guy I shoot with tried it in two rifles. In a factory Savage it was definitely too hot and the brass was toast (Lapua). In his Remington with a custom Bartlein barrel it was also to0 hot, but the brass was reloaded 1X, I do not think he will get more than 2x reloads out of them.

    That particular load of H1000 is way too much in my opinion, brass life will be the least of your concern. That load is kind of a beast, QL puts it at like 70K PSI under perfect conditions.

  3. #3
    Join Date
    May 2012
    Posts
    387
    Feedback Score
    0
    Quote Originally Posted by eightmillimeter View Post
    A guy I shoot with tried it in two rifles. In a factory Savage it was definitely too hot and the brass was toast (Lapua). In his Remington with a custom Bartlein barrel it was also to0 hot, but the brass was reloaded 1X, I do not think he will get more than 2x reloads out of them.

    That particular load of H1000 is way too much in my opinion, brass life will be the least of your concern. That load is kind of a beast, QL puts it at like 70K PSI under perfect conditions.
    This begs the question of what do these two civilian rifles actual chambers look like, specifically the throat length, diameter and angle.

    You can see below why the chamber pressures are higher.





    As a side note the SAAMI interchangeability warning for .223/5.56 ammunition did not come out until 1979 when the military introduced M855 ammunition that required a longer throat. I'm saying this because my Savage .223 has a longer throat than my two AR15 rifles do.
    Last edited by bigedp51; 10-09-13 at 15:57.

  4. #4
    Join Date
    Apr 2008
    Location
    NW Iowa
    Posts
    721
    Feedback Score
    0
    Quote Originally Posted by bigedp51 View Post
    This begs the question of what do these two civilian rifles actual chambers look like, specifically the throat length, diameter and angle.

    You can see below why the chamber pressures are higher.





    As a side note the SAAMI interchangeability warning for .223/5.56 ammunition did not come out until 1979 when the military introduced M855 ammunition that required a longer throat. I'm saying this because my Savage .223 has a longer throat than my two AR15 rifles do.
    First thing to remember in this case is that there is no "mil spec" for the .300 Win Mag, Black Hills was simply given the task of loading ammo to a certain desired spec that would not blow up a loose throated military gun on a hot day. The 248-1 load is 70K PSI under nominal conditions in mil barrels, and thusly, should not shock people when its too hot for your average 300 mag.

  5. #5
    Join Date
    May 2012
    Posts
    387
    Feedback Score
    0
    Quote Originally Posted by eightmillimeter View Post
    First thing to remember in this case is that there is no "mil spec" for the .300 Win Mag, Black Hills was simply given the task of loading ammo to a certain desired spec that would not blow up a loose throated military gun on a hot day. The 248-1 load is 70K PSI under nominal conditions in mil barrels, and thusly, should not shock people when its too hot for your average 300 mag.
    If it is shot by the military it has mil-spec requirements and Black Hills was awarded the contract to manufacture this "mil-spec" ammunition after reviewing all the bids made by the other manufactures.

    http://usarmorment.com/pdf/300WM_load%20data.pdf

    http://www.dtic.mil/ndia/2009infantr...ioniii8524.pdf

  6. #6
    Join Date
    Mar 2013
    Posts
    34
    Feedback Score
    0
    I had the original load and components data somewhere. The powder is H1000 and the bullet is the 220 grain Sierra Match King. It is loaded longer than the SAAMI maximum cartridge length. I think it is or was 3.5 inches. It might be 3.45" or somewhere around there but the original length was suppose to be 3.5 inches.

  7. #7
    Join Date
    Dec 2007
    Location
    MN
    Posts
    362
    Feedback Score
    27 (100%)
    Quote Originally Posted by bigedp51 View Post
    If it is shot by the military it has mil-spec requirements and Black Hills was awarded the contract to manufacture this "mil-spec" ammunition after reviewing all the bids made by the other manufactures.

    http://usarmorment.com/pdf/300WM_load%20data.pdf

    http://www.dtic.mil/ndia/2009infantr...ioniii8524.pdf

    Not that it matters, but I believe Federal was awarded the Mk 248 Mod 1 contract, not Black Hills. Unless it was rebid in the last couple of years.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •