Steve
Disclaimer: I am employed by Shadow Systems. My posts on this site are my own and do not necessarily reflect the views of my employer.
A QD mount would be awesome. When I say the caps need tow hands it was really the windage dial. The wire on the cap was tight to the point that the cap wouldn't spin freely.
Sent from my LG-LS995 using Tapatalk
http://www.americandefensemanufactur.../product/1139/
Link for the ADM QD Spitfire 1x mount (current capped/tethered turret and 2032 powered dial illumination selector model). No idea if it will be compatible with the next model due for release or not.
Last edited by SteveL; 01-08-16 at 16:20.
Steve
Disclaimer: I am employed by Shadow Systems. My posts on this site are my own and do not necessarily reflect the views of my employer.
They did specify that a riser will still be involved making absolute or lower 1/3 cowitness possible. I really wish they had stuck with the same base though. Once ADM, Bobro, and anyone else making mounts realizes they changed the base they may discontinue support for the previous version and may decide to drop it altogether. I'm going to jump on a Bobro as soon as they pop up, just in case.
Steve
Disclaimer: I am employed by Shadow Systems. My posts on this site are my own and do not necessarily reflect the views of my employer.
My second Spitfire arrived this week. Easily shoots itty bitty groups at fifty yards. When it warms up above freezing outside I'll stretch it out a bit.
Has anyone else run into a significant difference in zero if you try to co-witness thru the optic? Both of mine are over four inches different at fifty. Is this a common occurrence with prism sights?
Bookmarks