Visual guide: How to fill out a Form 1 using EFORMS

[Ryno12]

Roger that, thanks!

12/19 is the day for both of us! Here's to hoping...

I'd expect any day now. I had one submitted 12/11 & it was approved 3/10. They seem to be averaging around the 3 month mark, give or take...

[BigWaylon]

I'd expect any day now. I had one submitted 12/11 & it was approved 3/10. They seem to be averaging around the 3 month mark, give or take...

Yeah, any day. I've seen 12/19 forms approved a couple weeks ago, but then 12/4 forms approved in the last couple days. Just enough to keep me antsy...have about 3 dozen stamps, but this is my first SBS (also have my first AOW pending, but it's a paper F4).

[BigWaylon]

no need to include Schedule w/ trust upload on F1 efile right?

If the trust references a Schedule, they usually want to see one...even if it's blank.

[officerX]

91 days in on a Form 1. Hopefully it'll be approved in the next 7-10 days!

[officerX]

91 days in on a Form 1. Hopefully it'll be approved in the next 7-10 days!

Approved! 98 days in total. Thanks again for this guide!

[CRAMBONE]

Thank you for this. It helped a lot and dumbed things down for me.
How are you guys doing stripped lowers (AR9 lower specifically)? Just guesstimate the final OAL?

[BigWaylon]

Thank you for this. It helped a lot and dumbed things down for me.
How are you guys doing stripped lowers (AR9 lower specifically)? Just guesstimate the final OAL?

You've got to get it as close as you can. On the AR platform, it's often barrel length plus 19". The AR9 may be slightly different, but not by much.

[jeffreywt]

Thanks to my attorney and this guide, I got off my butt and joined the NFA club.

I put in a form 1 for my SLR-107UR and a second for my SR-15 lower. Next up is a paper form 4 for a can.

FYI, I was given an ID ending in 364 on 5/12 and the second ID was 851 on 5/14. Assuming the ID auto-increments, it's amazing how many people are submitting forms right now.

Again, thanks to all involved in the hard work and info on this thread. The eForms system is not hard to use but the first time can be a bit daunting. I was happy to have a step by step guide and everyone's experience to reference.

[BigWaylon]

FYI, I was given an ID ending in 364 on 5/12 and the second ID was 851 on 5/14. Assuming the ID auto-increments, it's amazing how many people are submitting forms right now.

There are definitely a lot of people submitting forms, but remember there are also a handful of industry forms still available, so if they pull from the same consecutive list of IDs, it's not as many F1s as it looks like.

[vandal5]

Just wanted to say thanks to BigWaylon and everyone else who has contributed info to this thread. I just submitted a Form 1 on 5/14. Hopefully if it is still taking around 100 days it will be approved the end of August.