|
||||||||||||||||||||||||||||||||||||||
Member
Hi all,
Recently purchased a NEA 15 with 14.5 inch barrel.
I'd like to fit a BAD lever to it but it seems the body of the rifle is a little to "chunky" and means the back of the BAD lever rests on the rifle body a bit causing interference and not letting the bolt release catch sit in its "fully release" position.
Has anyone else had this drama and does anyone have a solution?
Thanks for the help guys.
Last edited by Wally126; 04-13-14 at 03:12.
Member
Have you looked at the Phase5 EBRv2
http://phase5wsi.com/extended-bolt-release-v2.html
Originally Posted by Wally126
Member
Ohhh like it.
Will look into it.
Wonder if it can ship to the uk.
Member
Doesn't look like they'll ship to the UK... Bugger.
Senior Member
I am one of the few 'weirdos' around here that likes the BAD Lever because they work perfect with RediMags. I have 2 rifles that have Vltor MURs and the MURs will not allow the the bolt/catch release to have complete range of motion with a BAD lever. There is a lot of extra material on the rear of the BAD that can be ground off to allow complete movement. Not sure if it will work on NEA though. No experience with it.
-Jax
Last edited by jaxman7; 04-13-14 at 09:11.
"Despite what your mamma told you, violence does solve problems."
-Ryan Job
Member
i have a magpul BAD on my NEA15, fits/works perfectly. no function problems, works perfectly.
Member
You are one of the few?? I was under the impression that the BAD lever was a very popular addition to the platform. I have one on all of my rifles.
I'm still trying to find one to fit my 16s.
Senior Member
My solution to the problem is to remove the B.A.D. lever.
No, not a fan.
Member
Hmmm. I can 100% say a BAD lever will not fit on my NEA.
It's causes the hold open to engage.
Member
maybe you fit it wrong?
what year model do you have? i have a late 2012 model and it works perfectly.
Posting Permissions
Reply With Quote
Bookmarks