Results 1 to 2 of 2

Thread: 11.5" SBR/Suppressed Build

  1. #1
    Join Date
    Dec 2008
    Location
    Las Cruces, NM
    Posts
    50
    Feedback Score
    1 (100%)

    11.5" SBR/Suppressed Build

    It's long overdue for me.. I've been wanting to build my AR for far too long and tired of building buddies and seeing them enjoy the fruits of my labor.

    I've physically got everything to finish the build but the BCG and the Form 1. So my apologies on the lack of pictures. Nobody wants to see a pile of parts.

    Anyhow.. Below is the "Build Sheet" of what I've put together. I wanted to get some opinions and feedback from those of you with similar setups regarding the carrier. I spent a good bit of time researching things and all fingers pretty much point me to the LMT Enhanced Carrier w/ a std. bolt. For a rifle that will see a bit of time firing unsuppressed, will this "bleed" off too much gas when shooting milder ammo? I'd love to hear some thoughts.

    NOTE: No barrel is installed



    Receivers: Rainier Arms Matched Set

    Upper Specifications:
    Rail: KAC URX II Mid-Length (10.75”)
    BUIS: KAC Micro 300m
    Barrel: BCM BFH 11.5 CHF
    Bolt Carrier: LMT Enhanced Carrier
    Bolt: LMT Std. Bolt
    Charging Handle: BCM Gunfighter Mod-5 (Small)
    Gas Block: BCM Low Profile (Pinned by Rainier)
    Muzzle Device: AAC Blackout Flash Hider
    Suppressor: AAC M4-2000 Suppressor

    Lower Specifications:
    Stock: B5 Systems SOPMOD Bravo
    Receiver Ext.: VLTOR A5 (AE-10) 6-Position
    Buffer: VLTOR Std. Buffer
    Spring: VLTOR Rifle Spring
    Pistol Grip: MagPul MAID
    Trigger: Geissele SSA-E
    Trigger Guard: MagPul Enhanced
    Magazine Release: Norgon Ambi-Catch
    Safety Selector: BAD-ASS, Standard/Standard/Short
    Detents: KNS Precision
    Lower Parts: White Oak Armament
    Last edited by JustDSM; 04-16-14 at 22:03.

  2. #2
    Join Date
    Jan 2008
    Location
    AZ-Waging jihad against crappy AR's.
    Posts
    24,900
    Feedback Score
    104 (100%)
    https://www.m4carbine.net/showthread...Build-AR-Forum

    The custom build area is a place to show off/discuss and ask questions and get feedback about your completed custom build (this means a completed AR that is functional and already completed). If you are going to post pictures of your build, please post a complete picture not just your parts, partial lowers, etc....

    Also, buying an upper separate and then a lower and throwing them together does not constitute a custom build. It would be nice if you took time to explain how you came to your decision and explain your set up. Thanks.

    If you do not follow the guidelines and your post disappears it's probably because it was moved to the trash or deleted.



    Owner/Instructor at Semper Paratus Arms

    Facebook: https://www.facebook.com/SemperParatusArms/

    Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/

    M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141

    Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •