Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Aimpoint X3 magnifier clone?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2007
    Location
    oklahoma
    Posts
    42
    Feedback Score
    0

    Aimpoint X3 magnifier clone?

    I was just wondering if anybody has used a clone aimpoint X3 magnifier behind a real aimpoint red dot, does it work good because i don't want to spend $1000 on a sight and magnifier when i could spend that same amount on a trijicon X4 ACOG.

  2. #2
    Join Date
    May 2006
    Location
    VA/OH
    Posts
    29,631
    Feedback Score
    33 (100%)
    Quote Originally Posted by ar-15 fanatic View Post
    I was just wondering if anybody has used a clone aimpoint X3 magnifier behind a real aimpoint red dot, does it work good because i don't want to spend $1000 on a sight and magnifier when i could spend that same amount on a trijicon X4 ACOG.

    No, they really do not come even close to the real deal (sorry). I would suggest looking for a used 3X VS a clone.

    The difference between a Trijicon and an Aimpoint and magnifier is that the ACOG does not do CQB very well (like at all). The Aimpoint setup can wear more hats.


    C4

  3. #3
    Join Date
    Dec 2006
    Location
    CONUS & Overseas
    Posts
    582
    Feedback Score
    0
    Quote Originally Posted by ar-15 fanatic View Post
    I was just wondering if anybody has used a clone aimpoint X3 magnifier behind a real aimpoint red dot, does it work good because i don't want to spend $1000 on a sight and magnifier when i could spend that same amount on a trijicon X4 ACOG.
    Realizing that cost is often a factor, the reality is quality isn't inexpensive. "Buy Cheap, Buy Twice" as Pat Rogers' father often stated is very applicable. One of the reasons Aimpoint sights cost more that poorly designed and built competitors is that they use extremely high quality European naturally aged glass in all of their optics. This is the same glass used by the best European optics.

    Prices listed are MSRP and not what they are often sold at via reputable dealer. They are definitely not as expensive if you properly shop around. These prices are 2007 cost comparison that has been posted elsewhere. FYI, Aimpoint CompM4 and Micro T-1 prices did not increase for 2008.
    -------------------------------

    Military Combat Optics – Total Life Cycle Costs

    Aimpoint CompM4 w/3XMagnifier & Twist Mount MSR + Life Cycle Cost $1486
    Life Cycle Cost - 80,000 Hours w/ AA Lithium Battery
    CompM4 MSR $780 + 3X Magnifier MSR $535 + Twist Mount MSR $171
    Weight - CompM4 335g + 3X Magnifier w/Twist Mount 300g = 635g

    Micro T-1 w/LT660 Mount w/3X Magnifier & Twist Mount MSR + Life Cycle Cost $1455
    Life Cycle Cost – 50,000 Hours w/CR2032 Lithium Battery = 2 Batteries X $0.99 = $2
    Micro T-1 MSR $650 + LT660 Mount MSR $98 + 3X Magnifier w/ Twist Mount $706
    Weight – Micro T-1 w/ LT Mount 177gr + 3X Magnifier w/Twist Mount 300gr = 477gr

    Trijicon TA01NSN-DOC MSR + Life Cycle Cost $1605
    Life Cycle Cost – 10 Years Tritium + 17,000 Hours CR2032 Battery = 5 Batteries X $0.97 = $5
    TA01NSN-DOC MSR $1600 + Life Cycle Cost $5
    Weight – 424g

  4. #4
    Join Date
    Jun 2006
    Posts
    1,122
    Feedback Score
    1 (100%)
    There are other internet forums that extol the virtues of cheap asian knock-offs of real equipment. This isn't one of them.

    Most of the knock offs were DESIGNED by Airsoft companies. They make toys. They may resemble the real thing, but they do not have the quality of construction, durability or performance to match.

    Decide now whether you are the owner of a toy or a weapon.
    NOT in training for combat deployment.

  5. #5
    Join Date
    Feb 2008
    Location
    Covington, GA
    Posts
    182
    Feedback Score
    0
    There is always this guy...

    http://stores.homestead.com/Laruetac...Po+Boy+Special

    I think one or two of our members use this, maybe they will speak up about it. It's not an airsoft knock off but there is a cost savings.

  6. #6
    Join Date
    Jun 2006
    Location
    SE FL
    Posts
    14,147
    Feedback Score
    5 (100%)
    Quote Originally Posted by exitinyourhead View Post
    There is always this guy...

    http://stores.homestead.com/Laruetac...Po+Boy+Special

    I think one or two of our members use this, maybe they will speak up about it. It's not an airsoft knock off but there is a cost savings.
    I think that's the best option for those not sure if they want to go the magnifier route. You get a great mount and if you decide you like the magnifier you can upgrade to the Aimpoint magnifier later. Thanks for reminding me to order one (even though I can't think of any reason I need/want a magnifier.... )

  7. #7
    Join Date
    Feb 2008
    Location
    Covington, GA
    Posts
    182
    Feedback Score
    0
    Quote Originally Posted by rob_s View Post
    I think that's the best option for those not sure if they want to go the magnifier route. You get a great mount and if you decide you like the magnifier you can upgrade to the Aimpoint magnifier later. Thanks for reminding me to order one (even though I can't think of any reason I need/want a magnifier.... )
    It's all I can do not to give mr larue 200 bucks for no apparent reason. They must have sat in a room and thought.. hmmm... what price would make people buy this thing even if they couldn't possibly need it... 195!!!!

  8. #8
    Join Date
    Jan 2007
    Location
    New Jersey
    Posts
    512
    Feedback Score
    12 (100%)
    Last class with LV indicated no advantage in having a 3X magnifier-at any distance.

  9. #9
    Join Date
    Mar 2008
    Posts
    52
    Feedback Score
    0
    Quote Originally Posted by rob_s View Post
    I think that's the best option for those not sure if they want to go the magnifier route. You get a great mount and if you decide you like the magnifier you can upgrade to the Aimpoint magnifier later. Thanks for reminding me to order one (even though I can't think of any reason I need/want a magnifier.... )
    well, the month or so wait to get it will give you time to figure it out..lol

    I just got my shipping confirmation email last night, after a solid month of waiting.

    I don't know how many or thier flip mounts they made on this run, but hopefully they made enough to go around with a few left over..

  10. #10
    Join Date
    Jun 2008
    Posts
    183
    Feedback Score
    10 (100%)
    Quote Originally Posted by exitinyourhead View Post
    There is always this guy...

    http://stores.homestead.com/Laruetac...Po+Boy+Special

    I think one or two of our members use this, maybe they will speak up about it. It's not an airsoft knock off but there is a cost savings.
    I use one and it works just fine. The mount is great!!! The magnifier is very clear but the magnification is a little weak. I guess what can you expect from 2.5x? I run it behind an EoTech 557. I think EoTech totally had magnification in mind when designing this sight. The Holo is small compared to the 512 I traded in to get it..

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •