Results 1 to 8 of 8

Thread: anyone with a BE Meyer on a AR Pistol with 10"-12" barrel?

  1. #1
    Join Date
    Oct 2012
    Location
    IL
    Posts
    544
    Feedback Score
    3 (100%)

    anyone with a BE Meyer on a AR Pistol with 10"-12" barrel?

    Looking for anyone with this configuration.

    I'm trying to get an OAL from tip of BE 249F to the tip of a Sig Brace
    How is the gas pressure?
    How did you compensate for the recoil?
    What buffer and coil do you recommend?
    How much room would you give the 249F as far as rails are concern?

    thanks
    Quote Originally Posted by Failure2Stop View Post
    If you are in a fight, and something impedes your ability to adequately project force, correct that problem or remove yourself from the fight.

  2. #2
    Join Date
    Mar 2012
    Location
    southeast
    Posts
    3
    Feedback Score
    0
    I am running the BE Myers on my DD Mk18 upper (10.3" barrel, 10" RIS II rail). From the tip of the FH to the end of the Sig Brace is 30" exactly. I am running a KAK Industries receiver extension with the 1.25" spacer. Gas pressure seems fine, maybe a little over gassed since DD uses a little larger gas port. I am using an H buffer and the carbine spring that came with the KAK RE, and recoil had been very mild. As far as room for rails I am assuming you mean for "overhang" of a handguard, and there is not much room for that. There is less than an inch from the rear of the gas slots to the wrench flats on the FH. Hope that answered your questions. I may could get some pictures at a later date if you needed them for reference.
    Last edited by 95gtman; 07-28-14 at 15:55.

  3. #3
    Join Date
    Oct 2012
    Location
    IL
    Posts
    544
    Feedback Score
    3 (100%)
    Quote Originally Posted by 95gtman View Post
    Hope that answered your questions. I may could get some pictures at a later date if you needed them for reference.
    Yes, please. That would greatly help visualizing this project.
    Quote Originally Posted by Failure2Stop View Post
    If you are in a fight, and something impedes your ability to adequately project force, correct that problem or remove yourself from the fight.

  4. #4
    Join Date
    Mar 2012
    Location
    southeast
    Posts
    3
    Feedback Score
    0
    I am not the best photographer, but these should give you an idea of the setup.

    Last edited by 95gtman; 07-29-14 at 18:18.

  5. #5
    Join Date
    Oct 2012
    Location
    IL
    Posts
    544
    Feedback Score
    3 (100%)

    Talking


    your awesome Sir


    Not much room with the 249F, but, at least it looks clean on your set up.
    Last edited by Ledanek; 07-29-14 at 23:20.
    Quote Originally Posted by Failure2Stop View Post
    If you are in a fight, and something impedes your ability to adequately project force, correct that problem or remove yourself from the fight.

  6. #6
    Join Date
    Jun 2013
    Posts
    11
    Feedback Score
    0
    95gtman,
    Have you shot it much in that configuration. Trying to get an idea of how well the Insight/Haley WML holds up like that. Being so close to the FH and being plastic and all? Thanks for any input!

  7. #7
    Join Date
    Mar 2012
    Location
    southeast
    Posts
    3
    Feedback Score
    0
    I have between 300-400 rounds down range with this configuration. So far I have had zero problems with the light, and it is taking the abuse. Also the FH is timed just right to keep most of the gasses off the light.

  8. #8
    Join Date
    Jun 2013
    Posts
    11
    Feedback Score
    0
    Thanks 95!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •