Options for an Arsenal side folder stock?

[interfan]

This is Russian, available here, and works: https://legionusainc.com/lynx-arms-a...k-adapter.html

It is made for a current AK100 trunnion. For older Russian/Bulgarian, you just have to mill off 0.05mm off the top and the bottom where it fits in the trunnion recess as this is 1mm taller than a standard stock, but similar enough in width to work. I milled mine to fit it. I then used some aluminum black to touch up where the anodizing was milled off and it is right as rain. I also put a sleeve bushing in it and reamed for the pin since it was a little loose for the older style pin. I had some copper hydraulic line that was the correct OD and just ran a reamer through for the right ID. There is another one that goes back straight, where this one elevates the tube a little for better ergo with optics.

[Aries144]

ghjkl

[Aries144]

ghjkl

[ptmccain]

Sell your current Arsenal and buy an Arsenal with a side folding stock.

Way easier than what you are proposing to do.

[RAM Engineer]

Sell your current Arsenal and buy an Arsenal with a side folding stock.

Way easier than what you are proposing to do.

To whom are you speaking?

[english kanigit]

I'm really trying to find a way to adapt one of these to my SLR0107CR. As I understand it they have a 5.5mm pin and my Bulgarian gun has a 4.5mm pin. I believe it's angle of interface with the trunion is different as well.



Ek