Colt is Tier 1, LMT?

[BrianXD]

Colt seems to be considered one of the best manufactures. One of the best but not perfect.

How does LMT compare? Seems I can get a complete LM for about $1015 with enhanced bolt. Colts are nearly impossible to find, but seem to be more than that used.

[rob_s]

I would pass on the "enhanced" and go with a CMT MPI M16 bolt. Otherwise LMT are generally good to go. I would call them tier 1.5, either that or LMT and BCM are the new tier 2 and BM, RRA, etc. have been bumped to tier 3.

[BrianXD]

Thanks I thought M16 parts were illegal? did I miss something?

[M4arc]

It's perfectly legal to run an M16 bolt carrier.

I have a 16" LMT M4 and I hope to pick up a Colt LE6920 within the next few weeks (hopefully) so I'll run a little side by side comparison complete with photos for you.

However, I've been completely satisfied with all three of my LMTs including my little 10.5" which has been 100% reliable from day one. I have no complains with any of my LMTs but I still want a Colt...just because

[nyeti]

While I am generally a Colt snob, I do have two LMT MRP's with LMT lowers. They have been very reliable with very high round counts. I am also running standard LMT bolt groups in both as well. I would say the actions on the Defender lowers and the bolt groups are not wuite as smooth as my Colts, they are far from bad. LMT gets a thumbs up from me, and would definately be one of my top choices if a Colt was not available.

[AR-15A3]

I've been a Colt user for a long time (35 years) but now I have both Colt AR6721 and LMT Defender 2000 16" with LMT M16 BCG.

The slight differences I have noticed are the LMT barrel is not parked under the FSB and doesn't use taper pins for the FSB.

Colt LE6920 have double layer heat shields in the handguards, LMT have only one layer.

The LMT lower has a high shelf and small diameter FCG pins while the Colt have an unmachined web sear block and large FCG pins.

LMT's buffer tube is grey dry lube 5 position with three drain holes in the last rear most detent holes, Colt's are 4 position anodized.

So far I had my LMT for more than a year now and have no problems with it like my Colt, I would recommend it if you can't find a Colt.

There should be a big shipment of 6920 to Colt dealers either next month or so.

[RENEA]

LMT is good to go.

[kbi]

After picking up my LMT Defender yesterday and looking it over they are now my #1 brand .

[Foxandreed]

I have used what was issued(FN and Colt). I own Colt and an LMT Mrp. I find they are both perfect as they do everything they are advertised to do. This being said, I still own one Colt in 9mm and it is well put together but not the best looking gun. My LMT is the best looking package and just as well put together. By the way the FN is still the most fun that I have used on a regular basis (full fun switch).