What sling do you use on your pistol?

[26 Inf]

I use a Redi-Mag Two-Point Tactical Quick Adjust Sling. http://www.redi-mag.com/index.php?l=product_detail&p=26

Attachment points are the QD point at the back of my ALG Ergo Rail and the QD point built into my Thordsen Enhanced Buffer Tube Cover.

I run the sling differently than most - I adjusted it for a sling locked out CQB firing position at full sling extension and whacked off most of the excess webbing - my wife did the sewing and cutting. From a tight carry position I can pull the tab forward loosening the sling enough to get into a good sling assisted firing position.

I do it this way because I cut my teeth on the MP5 using the sling for CQB - with a red dot sight the pistol AR works excellent in this mode.

[JAMF]

I made my own from some '78 Plymouth Volare seatbelt. Gonna sew one up once I get it how I want it and find some non knock off paraclips, this one is just chicago screwed. Quick to adjust and super comfortable, I just wish I would have made on sooner. I'll probably try making a single point sling also later.
Rear is hooked to a magpul asap plate. I need to pick up a side sling mount for the front since it kind of binds in the bottom mount.

[IMG][/IMG]

[rero360]

I use a Magpul MS3 attached via a VLTOR QD receiver end plate and a Magpul RSA up front, just like my rifles except the MATEN, to heavy for that setup.

[David W]

I like single point for SBRs and two point for 14"+

[BillBond]

The same sling that is on my carbine, a Blackhawk three point sling.

[U&A]

I use a BFG 2point sling on everything.....including my Glocks.....