POF Roller Cam Pin

[Robb Jensen]

Also less mass = less force striking the primer...

I've also seen them wear at the FP nose and create a burr which then pierces primers, ruins bolts (from primer flow) and often makes the rifle slam fire...

Faster lock time is best accomplished with a faster trigger like a Geissele DMR hi-speed.

[Alaska3006]

I am using a SSA E trigger from Geissele

But I will monitor the Firing Pin for wear, so far so good..........I still have my Colt Firing Pin as back up

[Alaska3006]

all good info to watch for thanks

[308sako]

308sako
Can you tell a difference with the 3 hole LMT enhanced Carrier

I have not yet had the opportunity to shoot it enough to give even an opinionated answer. In other words I can't see a difference yet.

[Alaska3006]

I have not yet had the opportunity to shoot it enough to give even an opinionated answer. In other words I can't see a difference yet.

It suppose lower port pressure .........that might be my next purchase.

[308sako]

It suppose lower port pressure .........that might be my next purchase.

Because the pin was too tight the bolt/carrier weren't cycling properly and therefore couldn't make a judgement on function. Maybe Friday.