Results 1 to 4 of 4

Thread: Loose bolt catch?

  1. #1
    Join Date
    Oct 2013
    Posts
    118
    Feedback Score
    2 (100%)

    Loose bolt catch?

    My PSA complete lower's bolt catch is very loose with side to side play when the bolt is closed. Could this cause any problems?

  2. #2
    Join Date
    Sep 2011
    Location
    NJ
    Posts
    128
    Feedback Score
    2 (100%)
    Is the roll pin moving or something? Pretty sure you are going to get some side-to-side play. Can you quantify 'very loose' and the amount of travel perhaps?

  3. #3
    Join Date
    Oct 2010
    Location
    Where The Wind Never Blows, Wyoming
    Posts
    2,200
    Feedback Score
    4 (100%)
    1) Does the bolt catch hold the BCG open when the last round is fired from the magazine?

    2) Does the bolt catch release the BCG when pressed to chamber a round from a magazine?

    3) Does the rifle go BANG when you press the trigger after the BCG goes into battery with a live round?

    If the answer is yes to all three questions, then you are having a very good day and should celebrate with a cold one!

  4. #4
    Join Date
    Sep 2012
    Posts
    21
    Feedback Score
    1 (100%)
    These will have left to right play, just make sure the roll pin is in and isn't coming out.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •