Shim Kit / Peel Washer Recommendation - BCM LW Barrels

[dan5505]

Hello,

I just picked up my new Saker 762 today. My host has an 11.5" BCM light weight barrel. http://www.bravocompanyusa.com/BCM-S...11lw%20std.htm

I didn't think about it when I bought the barrel, but the shoulder area must be .625" OD like the gas block journal. Does anybody make a shim kit or peel washer than is .625" OD? The .75" OD don't seem appropriate.

[GH41]

Look at this system. http://precisionarmament.com/product...washer-system/ The ground washers are 3/4" OD but much thicker than typical shims.

[dan5505]

Look at this system. http://precisionarmament.com/product...washer-system/ The ground washers are 3/4" OD but much thicker than typical shims.

Those look nice. Thanks for the suggestion.

[GH41]

The only downside is the cost if you are only doing one barrel. I can scan and send you the instructions if it helps with your decision.

[dan5505]

The only downside is the cost if you are only doing one barrel. I can scan and send you the instructions if it helps with your decision.

Don't go through the trouble to scan, but thanks for the offer. I will most likely go with these unless I find a better solution. I don't mind paying $25 for shims when you consider the cost of the suppressor and host.

[t1tan]

I used the Precision Armament set, fan-****ing-tastic stuff

[BufordTJustice]

Look at this system. http://precisionarmament.com/product...washer-system/ The ground washers are 3/4" OD but much thicker than typical shims.

These are all I use now, regardless of muzzle device.

[markm]

I'm so glad that the days of Peel Washers are behind us. I'll have to check out a set of the precisionarmament.com washers.

[BufordTJustice]

I'm so glad that the days of Peel Washers are behind us. I'll have to check out a set of the precisionarmament.com washers.

Oh gawd! How many minutes of my life have I already donated to peel washers? I'm never going back.

AAC has some shims as well, but I haven't used them.

[MistWolf]

Even better, I'm glad the days of the crush washer are over