Voodoo
Ar15barrels is going to re profile both my heavy contour barrels and parkerize them.
Voodoo
Ar15barrels is going to re profile both my heavy contour barrels and parkerize them.
You are talking about 556 then, this barrel http://www.voodooinnovations.com/7-5...l-lite-barrel?
Yes I am!
I'm going to assemble and fire this one and send both my 8" 300 and 8" 5.56 to be re profiled since I ended up getting the ballistic advantage barrels
The 8" will fit a can/blast shield as long as they don't extend past the threads of the barrel. A 7.5 would of been close and most likely wouldn't seal all the way
Wow, that is going to be a truly amazing build. Please post it in the custom build forum when its done.
IDK what you plan on for a stock set up nut a LWRC uciw ultra compact stock would be very cool. https://www.lwrci.com/p-361-uciw-ult...act-stock.aspx
I have one and it has functioned with all uppers I tried it with.
Last edited by TMS951; 04-09-15 at 11:24.
Seeing that 8.25" in the 7" KMR makes me think that the 8" Seekins won't fit in there......
8" barrel won't fit a 8" rail.
I mean the 8" seekins in the 7" KMR
That 8.25" from jerrysimons looked tight enough to make me question if the aforementioned combo would work.
My barrel will be here this week, it's an 8". I will be running a griffin blast shield with it so I will let you know
Bookmarks