I'm really new and tried to use the search function. FTF almost every round. Gouged cases on the feed ramps and the cases appear to be ejecting at the 1-2:00 position. Newish rifle. 16". Middy.
Sent from my iPhone using Tapatalk
I'm really new and tried to use the search function. FTF almost every round. Gouged cases on the feed ramps and the cases appear to be ejecting at the 1-2:00 position. Newish rifle. 16". Middy.
Sent from my iPhone using Tapatalk
Are those reloads? Looks like your using too much lube if so
Sent from my iPhone using Tapatalk
They're XM193 black box. I lubed the hell out of it today to see if it helped. It did not. Lol
Sent from my iPhone using Tapatalk
I should also add that it doesn't matter what magazine i use or which brand. C products, BCM D&H or PMags
Sent from my iPhone using Tapatalk
That is only going to add to the problem with cases looking like that.
Is the bolt sluggish? Show a photo of the primers and id give the rifle a good cleaning especially the Bcg
Sent from my iPhone using Tapatalk
It has less than 200 rounds thru it if I had to take a guess. Maybe a hundred more. I clean it after every time I shoot, it has always done this, but seems to be getting much worse. I first thought it was the junk mag it came with, but it's not.
All the junk in the star chamber is from less than 60 rds today.
Sent from my iPhone using Tapatalk
What brand rifle and Bcg
Any mods done to it?
Was that brass from an FTF?
Sent from my iPhone using Tapatalk
Last edited by boombotz401; 04-24-16 at 16:45.
Like I said before. I usually run it much drier. Much. I'm taking all advise seriously. Just trying to add as much info as I can.
Sent from my iPhone using Tapatalk
Is this failure to fire or failure to feed
Sent from my iPhone using Tapatalk
Recreated image of typical malfunction
Sent from my iPhone using Tapatalk
Bookmarks