I'm currently running RRA 9mm with RRA non-ramped bolt.
I plan to get my bolt ramped and I'm wondering which hammer I should be using with the ramped bolt?
Thanks in advance
Paul
I'm currently running RRA 9mm with RRA non-ramped bolt.
I plan to get my bolt ramped and I'm wondering which hammer I should be using with the ramped bolt?
Thanks in advance
Paul
Colt style or the DPMS hammer.
Another question.
I understand that RRA 9mm hammer will not work with ramped bolt but I'm confused why?
Is the 9mm hammer and unramped bolt hard on hammer pin as opposed to standard hammer and ramped bolt?
Thanks for the info.
So ramped bolt / AR-15 hammers and I should be good to go?
If not which hammer should I get? Colt?
Ramped bolt = COLT or DPMS style (smooth face w/o the notch).
I got my modified (tail piece removed) Colt hammer from M60Joe.
[QUOTE=Paulinski;211948]Another question.
I understand that RRA 9mm hammer will not work with ramped bolt but I'm confused why?
I'm a newbie so take it for what it's worth, but after I got my bolt ramped, just for S&Gs I tried the stock RRA hammer and it appeared that the square notch on the top, front of the hammer would catch on the groove that is machined into the bolt (and is still exposed after ramping) and not allow the bolt to go back into battery. I had to remove the lower to get it unstuck. You can't even pivot it open because the bolt is still part way into the stock.
Jeff
Bookmarks