Varmint/Target Project Savage 110

[nova3930]

will check it out thanks

Sent from my SAMSUNG-SM-G930A using Tapatalk

[nova3930]

got the new barrel installed tonight. stupid easy.



tried fitting the old stock to the new barrel and action with no success. the stock was so untrue that I would have had nothing left on the right side by the time I got enough relief for the barrel.







so, lesson learned, that old savage stocks aren't terribly straight. at least I'm not out much more than some shop therapy time.

now who knows of some good inexpensive stocks?

Sent from my SAMSUNG-SM-G930A using Tapatalk

[nova3930]

since this is a project for fun, decided to try something different. milled off the barrel channel completely. that way as I set the action the barrel can truly go wherever. if it doesn't work then I'm no worse off than before, just get another stock.





Sent from my SAMSUNG-SM-G930A using Tapatalk

[jbjh]

since this is a project for fun, decided to try something different. milled off the barrel channel completely. that way as I set the action the barrel can truly go wherever. if it doesn't work then I'm no worse off than before, just get another stock.





Sent from my SAMSUNG-SM-G930A using Tapatalk

Now we're talking! You can attach a flat piece to the front as a bag rider or put a bipod stud in.


Sent from 80ms in the future
Jimmy

[nova3930]

Now we're talking! You can attach a flat piece to the front as a bag rider or put a bipod stud in.


Sent from 80ms in the future
Jimmy

had not considered the bag rider idea. that's an interesting one.

I'd only thought about the bipod. Probably with something like this to replace the single point lag screw sling stud that's already in thr stock

http://www.brownells.com/shooting-ac...prod41593.aspx

Sent from my SAMSUNG-SM-G930A using Tapatalk

[nova3930]

Finally got around to bedding the pillars. Next step is to further relieve the stock and do a full bed job.

BTW anyone doing bedding jobs, Frekote is the way to go. None of that shoe Polish nonsense. We used Frekote building composite aircraft parts back in college. Those resin formulations were way stickier than any bedding compound.

Frekote 398489 770-NC Mold Release, 10.5 fl oz https://www.amazon.com/dp/B00SJ7U0SS..._Q3erybDRKKBF6









Sent from my SAMSUNG-SM-G930A using Tapatalk

[jbjh]

That's coming along nicely!


Sent from my iPhone using Tapatalk

[nova3930]

That's coming along nicely!


Sent from my iPhone using Tapatalk

Thanks. Just wish I had more time to work on it

Sent from my SAMSUNG-SM-G930A using Tapatalk

[nova3930]

Worked on the stock profile and relief for the bedding and sear last night. Maybe get it bedded by the weekend.







Sent from my SAMSUNG-SM-G930A using Tapatalk

[nova3930]

Actually had a chance to bed the action tonight. I hope I didn't screw it up. Guess I'll know tomorrow morning.

Sent from my SAMSUNG-SM-G930A using Tapatalk