BCM, Hodge, Centurion 12.5 Suppressed Build

[Jwknutson17]

It been a while since I posted up a build, so here is my 12.5 do all, "one rifle" type of build. My goal was to create another do all type rifle with all quality components. Ive done some 11.5 and 13.7 builds that I was proud of on here, but it was time for a 12.5. Special thanks to Mr. Hodge for the HDSI parts. Thank you if you read this! Not much to say, besides this rifle will be a go-to, do-all, rifles for pretty much all my needs. I have a surefire M300C and KAC offset mount that I have not put on it yet, and I am still looking for a 99051 black KAC front sight if someone has one, PM me. This barrel was specifically chosen for the gas port size. My gauges measured .0635 and the "spec" on this barrel was .0650. Gas block journal is the standard .750 if anyone cares. As it is technically a LW barrel. The SOCOM Mini here is a duplicate as I couldn't turn down another Mini last year when they hit 799 bucks. It needed a home, and found this new 12.5. Still undecided if a CQB-L or other laser device will go on this one or not. For now, no, but there is always a chance. As of now, I have not put any rounds through this setup. I have no doubt it will be a awesome shooter, just like my previous 12.5 builds.

Comments, questions, like it, hate it, I am all ears.

Lower:
-BCM4 Lower
-Gunfighter Grip
-QD end plate
-Geissele SD-C Trigger
-Vltor A5 System
-Magpul SL-S stock
-Bad Ambi

Upper:
-Hodge Upper Receiver
-Centurion 12.5 barrel
-Centurion C4 BCG
-BCM GF CH
-Hodge Wedgelock 11.5 rail
-Hodge Gas block
-Surefire SFMB
-Surefire SOCOM Mini
-Leupold MK6 1-6
-ADM QD Mount
-KAC micro Rear sight
-KAC Micro Front
-Naroh Handstop
-Surefire m300c
-Surefire SR05 Switch
-KAC offset scout mount










EDIT.............

[fallenromeo]

Damn, that is a quality rifle! Well done!

[Jwknutson17]

Damn, that is a quality rifle! Well done!

Thank you. It was a fun build. This Wedgelock is climbing up there with my URX3.1's, Geissele MK1, and URX4 Mlok's as one of my favorite rails.

[JG007]

Thank you. It was a fun build. This Wedgelock is climbing up there with my URX3.1's, Geissele MK1, and URX4 Mlok's as one of my favorite rails.

Can you give the pros/cons of each of these rails?

[Jwknutson17]

Can you give the pros/cons of each of these rails?

Every rail has its pros and cons, but what specifically are looking for? Pros for me might be cons for others and vice versa.. If you know what I mean.. I think the weight of the MK1 is a non issue. Maybe you think its a deal breaker. Specific applications for specific rails.

[jpmuscle]

Very nice Jake. I hope we see minis for 799 again some day lol.

[Jwknutson17]

Very nice Jake. I hope we see minis for 799 again some day lol.

Thanks. I would buy another few at that price. The $799 deal was just too good to pass up. And it had a MD in the box. Wasn't expecting that.

[jpmuscle]

Considering your fondness for the URX4 as we've discussed what was your reasoning going with the Hodge rail? The additional length to pair with the 12.5 or just something different?

[Jwknutson17]

I had the 10.75 URX4 and Vltor MUR1a in hand for this build. A fellow M4C member needed them for a 11.5 build, so PIF sounded like a better plan for those parts. I have 4 rifles with the URX4 mlok, and with the 11.5 rail length for this 12.5 build, I figured why not. Coupled with the generosity of Jim, this build got the HDSI parts.

[jpmuscle]

I had the 10.75 URX4 and Vltor MUR1a in hand for this build. A fellow M4C member needed them for a 11.5 build, so PIF sounded like a better plan for those parts. I have 4 rifles with the URX4 mlok, and with the 11.5 rail length for this 12.5 build, I figured why not. Coupled with the generosity of Jim, this build got the HDSI parts.

Ah, good stuff.