Page 1 of 4 123 ... LastLast
Results 1 to 10 of 39

Thread: BCM, Hodge, Centurion 12.5 Suppressed Build

  1. #1
    Join Date
    Feb 2014
    Location
    USA
    Posts
    1,710
    Feedback Score
    204 (100%)

    BCM, Hodge, Centurion 12.5 Suppressed Build

    It been a while since I posted up a build, so here is my 12.5 do all, "one rifle" type of build. My goal was to create another do all type rifle with all quality components. Ive done some 11.5 and 13.7 builds that I was proud of on here, but it was time for a 12.5. Special thanks to Mr. Hodge for the HDSI parts. Thank you if you read this! Not much to say, besides this rifle will be a go-to, do-all, rifles for pretty much all my needs. I have a surefire M300C and KAC offset mount that I have not put on it yet, and I am still looking for a 99051 black KAC front sight if someone has one, PM me. This barrel was specifically chosen for the gas port size. My gauges measured .0635 and the "spec" on this barrel was .0650. Gas block journal is the standard .750 if anyone cares. As it is technically a LW barrel. The SOCOM Mini here is a duplicate as I couldn't turn down another Mini last year when they hit 799 bucks. It needed a home, and found this new 12.5. Still undecided if a CQB-L or other laser device will go on this one or not. For now, no, but there is always a chance. As of now, I have not put any rounds through this setup. I have no doubt it will be a awesome shooter, just like my previous 12.5 builds.

    Comments, questions, like it, hate it, I am all ears.

    Lower:
    -BCM4 Lower
    -Gunfighter Grip
    -QD end plate
    -Geissele SD-C Trigger
    -Vltor A5 System
    -Magpul SL-S stock
    -Bad Ambi

    Upper:
    -Hodge Upper Receiver
    -Centurion 12.5 barrel
    -Centurion C4 BCG
    -BCM GF CH
    -Hodge Wedgelock 11.5 rail
    -Hodge Gas block
    -Surefire SFMB
    -Surefire SOCOM Mini
    -Leupold MK6 1-6
    -ADM QD Mount
    -KAC micro Rear sight
    -KAC Micro Front
    -Naroh Handstop
    -Surefire m300c
    -Surefire SR05 Switch
    -KAC offset scout mount










    EDIT.............




    Last edited by Jwknutson17; 02-18-17 at 17:48.
    Philippians 4:13

  2. #2
    Join Date
    Feb 2012
    Posts
    846
    Feedback Score
    1 (100%)
    Damn, that is a quality rifle! Well done!

  3. #3
    Join Date
    Feb 2014
    Location
    USA
    Posts
    1,710
    Feedback Score
    204 (100%)
    Quote Originally Posted by fallenromeo View Post
    Damn, that is a quality rifle! Well done!
    Thank you. It was a fun build. This Wedgelock is climbing up there with my URX3.1's, Geissele MK1, and URX4 Mlok's as one of my favorite rails.
    Philippians 4:13

  4. #4
    Join Date
    Feb 2012
    Location
    OUTPOST 31
    Posts
    10,518
    Feedback Score
    30 (100%)
    Very nice Jake. I hope we see minis for 799 again some day lol.

  5. #5
    Join Date
    Feb 2014
    Location
    USA
    Posts
    1,710
    Feedback Score
    204 (100%)
    Quote Originally Posted by jpmuscle View Post
    Very nice Jake. I hope we see minis for 799 again some day lol.
    Thanks. I would buy another few at that price. The $799 deal was just too good to pass up. And it had a MD in the box. Wasn't expecting that.
    Philippians 4:13

  6. #6
    Join Date
    Feb 2012
    Location
    OUTPOST 31
    Posts
    10,518
    Feedback Score
    30 (100%)
    Considering your fondness for the URX4 as we've discussed what was your reasoning going with the Hodge rail? The additional length to pair with the 12.5 or just something different?

  7. #7
    Join Date
    Feb 2014
    Location
    USA
    Posts
    1,710
    Feedback Score
    204 (100%)
    I had the 10.75 URX4 and Vltor MUR1a in hand for this build. A fellow M4C member needed them for a 11.5 build, so PIF sounded like a better plan for those parts. I have 4 rifles with the URX4 mlok, and with the 11.5 rail length for this 12.5 build, I figured why not. Coupled with the generosity of Jim, this build got the HDSI parts.
    Last edited by Jwknutson17; 12-22-16 at 16:51.
    Philippians 4:13

  8. #8
    Join Date
    Feb 2012
    Location
    OUTPOST 31
    Posts
    10,518
    Feedback Score
    30 (100%)
    Quote Originally Posted by Jwknutson17 View Post
    I had the 10.75 URX4 and Vltor MUR1a in hand for this build. A fellow M4C member needed them for a 11.5 build, so PIF sounded like a better plan for those parts. I have 4 rifles with the URX4 mlok, and with the 11.5 rail length for this 12.5 build, I figured why not. Coupled with the generosity of Jim, this build got the HDSI parts.
    Ah, good stuff.

  9. #9
    Join Date
    Jun 2007
    Location
    Black Hills of S.D.
    Posts
    1,697
    Feedback Score
    3 (100%)
    That is one sweet build.

  10. #10
    Join Date
    Sep 2016
    Posts
    753
    Feedback Score
    33 (100%)
    I have almost a carbon copy of your build. The only thing different on mine is I used a vltor stripped upper and a razor 1-6. I too have started to love the wedgelock rails and now have 3 of the hodge rails on my guns.

Page 1 of 4 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •