Last edited by BufordTJustice; 02-18-17 at 19:00.
"That thing looks about as enjoyable as a bowl of exploding dicks." - Magic_Salad0892
"The body cannot go where the mind has not already been."
I'm more of a fan of gassing the gun right and forcing the gun to run with the correct/standard buffer. Pappabear and I are in the middle of doing this to 3 or 4 10.5" SBRs using insertable gas ports. It seems that every booger brained manufacturer of 10.5" barrels sees it appropriate to put an .080 +/- port on these barrels.
"What would a $2,000 Geissele Super Duty do that a $500 PSA door buster on Black Friday couldn't do?" - Stopsign32v
Exactly. They're pretty over gassed un-suppressed... forget adding the can.
Not that I know of. When it comes to 14.5 middy and 10.5 carbine, I know the desired ports by heart.Is there an engineering table somewhere that correlates dwell time, port size, buffer weight, and gas pressure?
"What would a $2,000 Geissele Super Duty do that a $500 PSA door buster on Black Friday couldn't do?" - Stopsign32v
Running a heavier weight buffer does not change the momentum, you are simply changing the duration in which the reciprocating mass cycles and the "perceived felt recoil changes" I'll explain more in detail in a review im going to post next week. If your goal is for wear and tear I would suggest an adjustable gas block. cheers
Deleted
Last edited by bfoosh006; 08-29-17 at 19:33.
So, the best solution offered (based on others' implementation) is to remove the aluminum spacer, and install two steel weights and rubber discs. How many rubber pieces are needed/recommended? I pulled my rifle buffer apart tonight and after measuring the spacer at 1.25", it seems that (plus the steel weights) only one rubber disc is required... but I'd like to make sure before I order.
Heavy Buffers carries an 11-ounce XH buffer for rifles. It'll work with M193.
The XH buffer or tungsten insert carrier weight system help to keep the system locked longer. It makes the rifle operate smoother as the system literally takes longer to unlock and cycle. It stresses brass less as it'll have cooled and not be expanded (obturated) against the chamber walls.
Bookmarks