Best Barrel

[sprice]

***I figured I would resurrect this thread instead of starting a new one; vicious cb made some great points about why we don’t hammer forge stainless for accuracy benefits. But stainless has chromium, and chromium is work hardened, so perhaps stainless would be the better steel to hammer forge because it will also get work hardened and become even more dense?!***

Is there anyone who makes a CHF Stainless steel barrel with a nitride treatment?

I'm just thinking out loud so please, correct me if I'm wrong; but chrome lined CHF doesn't sound very practical to me, because it seems like the benefits of the CHF would only be seen after the chrome has been shot out, and by then it's time to get a new barrel.

Stainless steel would be good for the accuracy benefit, even though it wears faster. But in my thinking, if it starts out more accurate then it can afford to wear a little bit more. Hammer forging the steel would bring out even more accuracy and wear resistance.

The nitride would increase the outer hardness of the barrel, and nitride treatment can happen after the fact. Is there anyone who sells a CHF stainless barrel? Especially an 11.5" one?

[MistWolf]

The chrome lining is only as good as the base metal. The better the base metal, the more effective the chrome lining will be.

PSA offers a SS CHF barrel (or did), but it's rare. I don't know if it's available in an 11.5" length or not

[vicious_cb]

Is there anyone who makes a CHF Stainless steel barrel with a nitride treatment?

I'm just thinking out loud so please, correct me if I'm wrong; but chrome lined CHF doesn't sound very practical to me, because it seems like the benefits of the CHF would only be seen after the chrome has been shot out, and by then it's time to get a new barrel.

Stainless steel would be good for the accuracy benefit, even though it wears faster. But in my thinking, if it starts out more accurate then it can afford to wear a little bit more. Hammer forging the steel would bring out even more accuracy and wear resistance.

The nitride would increase the outer hardness of the barrel, and nitride treatment can happen after the fact. Is there anyone who sells a CHF stainless barrel? Especially an 11.5" one?

I dont think you understand barrel manufacturing or any of these processes very well.

First of all, stainless steel barrels are accurate not because of the material but because stainless steel can be machined easier thus its easier to make a more consistent bore. If you CHF a stainless barrel and a CMV barrel both barrels would have the same accuracy potential since they are both formed around the exact same mandrel except one would have a shorter lifespan.

Also you are wrong in the statement that CHF doesnt help immediately, the chrome in the throat area DOES wear away rather quickly, so you do see an advantage in the work hardening CHF provides sooner rather than later.

Not even going to go into nitride since there are probably a dozen threads on nitride vs chromelined.

[sprice]

Totally correct, that's why I'm asking questions.

So if stainless is more accurate because it's easier to machine, why don't they just use softer carbon steel?

[vicious_cb]

Totally correct, that's why I'm asking questions.

So if stainless is more accurate because it's easier to machine, why don't they just use softer carbon steel?

Carbon steel has poor corrosion resistance, we get around that by chrome lining, except chrome lining is imprecise(relatively). Stainless is both corrosion resistant and easy to machine. You can absolutely get an accurate CMV unlined barrel, you just have to baby it more.

[sprice]

Ok that makes sense. So why isn't there any CHF Nitride 4150 barrels?

[vicious_cb]

Ok that makes sense. So why isn't there any CHF Nitride 4150 barrels?

The CHF machines are expensive. AFAIK only DD and FN have them and maybe KAC. FN makes barrels for the mil. which specs chrome lined and DD also makes their barrels to mil-spec.