Contacted BCM this afternoon via mail. Hopefully they'll take care of it. I have a new DD BCG to toss in there if needs be until this one gets squared away.
Contacted BCM this afternoon via mail. Hopefully they'll take care of it. I have a new DD BCG to toss in there if needs be until this one gets squared away.
Three reasons-
1) When the extractor spring is weak, it loses control of the rim of the case before the mouth of the case clears the ejection port. This means it's not held against the bolt face and the ejector cannot flick it out. The empty stays inline with the action
2) If it was the extractor was working and the ejector was not, the extractor would hold the case against the bolt face until either a weak ejector flipped it 90° or the next round from the mag pushed it 90° and the result would be a classic stovepipe
3) Each time I've encountered the problem, replacing the extractor spring always fixed it
Last edited by MistWolf; 03-13-17 at 16:03.
The number of folks on my Full Of Shit list grows everyday
I am American
Owner/Instructor at Semper Paratus Arms
Facebook: https://www.facebook.com/SemperParatusArms/
Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/
M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141
Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com
That's a very good point, IG
The number of folks on my Full Of Shit list grows everyday
I am American
I'm not a patient man. I emailed BCM Sunday and have not yet received any response. Does anyone have a better address to contact them other than the shitty info@ address that probably gets spammed to high heaven?
Sent from my iPad using Tapatalk
They are usually pretty good about getting back. Try giving them a call.
So I will fully own up to a technical failure on my part. Sent email via iPad and for some reason it never left the inbox. Re-emailed them and have already heard back. Will be shipping BCG back for a replacement.
Bookmarks