Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Swageit for RL550B

  1. #11
    Join Date
    Dec 2010
    Location
    Texas
    Posts
    2,675
    Feedback Score
    22 (100%)
    For those who have used the Dillon Super Swage, have yall had any issues with the swage being off center where only half of the crimp was taken out? Also, did y'all have issues with different headstamps swaying differently from each other (some too much and some not enough)?

    Sorry for the slight off topic, but the Swageit looks like a good solution...but just curious if my Super Swage was just set up wrong.

  2. #12
    Join Date
    Sep 2012
    Posts
    171
    Feedback Score
    0
    Get the centering inserts from Inline Fabrication (mash me). I have one and it works great.

    My other little trick is I take a black sharpie and draw a line across the bottom of my 223 reloads. When I'm picking up my brass and any other that is left behind I can easily sort my brass that I know is swaged already from the rest. I'll clean them separately and throw them in the "Clean, deprimed & swaged" bin. I have a single stage press and a super swage mounted on a grinder stand so I can deprime and swage while watching TV. I swage all my 223 because it's as quick to look as it is to swage while watching TV.

  3. #13
    Join Date
    Sep 2012
    Posts
    171
    Feedback Score
    0
    Oh and be careful on Inline Fabrication's web site, I've bought a ton of his stuff. It's easy to do!

    Both my 650s are set up with the following:
    Ultra mounts, dual bins, skylights, bin barriers, tool head stands with the wall storage system, and primer tube racks.

  4. #14
    Join Date
    Feb 2013
    Location
    Midwest
    Posts
    4,297
    Feedback Score
    3 (100%)
    Quote Originally Posted by Ironman8 View Post
    For those who have used the Dillon Super Swage, have yall had any issues with the swage being off center where only half of the crimp was taken out? Also, did y'all have issues with different headstamps swaying differently from each other (some too much and some not enough)?

    Sorry for the slight off topic, but the Swageit looks like a good solution...but just curious if my Super Swage was just set up wrong.

    I haven't had any issues. I do have to move the swaging pin slightly to center it in the primer pocket as I press down on the press handle. If I do my part, the Dillon Super Swage does it's job.
    Train 2 Win

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •