Results 1 to 7 of 7

Thread: Opinions needed...Suppressor mounting for 9mm SBR

  1. #1
    Join Date
    Oct 2007
    Location
    Ohio
    Posts
    1,824
    Feedback Score
    14 (100%)

    Opinions needed...Suppressor mounting for 9mm SBR

    I am in the process of finishing a 9mm, Colt mag style, SPR. The barrel is threaded 1/2 x 28. The intended suppressor is going to be an AAC Tirant that I've had laying around for a while.

    The question is, if using the 1/2 x 28 piston with a fixed barrel spacer, would there be any concerns as to the suppressor occasionally loosening up during high round count sessions, and thus having to be constantly checked and tightened, OR.... would the best bet be to go with a 3-Lug muzzle device and 3-Lug adapter on the suppressor?

    Thanks in advance!
    Last edited by Singlestack Wonder; 03-20-17 at 17:16.
    "WINNING" - When all of the liberal democrats and other libtards start throwing themselves off cliffs because they don't get their way...

    JEDIsh: We are asked not to judge all muslims by the acts of a few extremists, but we are encouraged to judge all gun owners by extreme acts of the few.

  2. #2
    Join Date
    Aug 2011
    Location
    N.E. OH
    Posts
    3,337
    Feedback Score
    0
    I would go 3-lug.

    I got mine to stay tight with an oring, but I've only tested it on one range session, and orings won't stand up to extreme temps. Its on a pistol, so the extra movement may cause it to loosen.

    If you have the parts I'd try it. Although the investment for 3lug is less than fixing a baffle strike.
    Last edited by MegademiC; 03-20-17 at 21:02.

  3. #3
    Join Date
    Jan 2016
    Location
    land of the sand
    Posts
    42
    Feedback Score
    3 (100%)
    3 lug less worry about turning loose.
    and the 3 lug itself is easy to find.
    there is a vendor on the forum that sells a 3 lug tool that works great as well

  4. #4
    Join Date
    Jul 2009
    Posts
    19,745
    Feedback Score
    2 (100%)
    Thread on three lug adapters simply become the new mounting point and they can come unscrewed as easily as a threaded mount suppressor. The only way you will gain any real advantage is if you permanently mount the three lug.

    With any thread on QD mount, you have to remember that it is still threaded on.
    It's hard to be a ACLU hating, philosophically Libertarian, socially liberal, fiscally conservative, scientifically grounded, agnostic, porn admiring gun owner who believes in self determination.

    Chuck, we miss ya man.

    كافر

  5. #5
    Join Date
    Jul 2016
    Location
    Edge of Nowhere
    Posts
    63
    Feedback Score
    0
    Direct thread via piston has worked for me for thousands of rounds across 4-5 different platforms. And not once has it come loose via the connection point. Where I have seen it come loose is the end cap to suppresor, anywhere from 1/8 to a 1/4 turn at best. Due to the old design of the spacer which kept it from seating flush with the suppressor. AAC has since come out with a new design spacer and wave spring to seat everything flush now:

    http://www.advanced-armament.com/Imp...N-9_p_720.html

    http://www.advanced-armament.com/Imp...ies_p_721.html

  6. #6
    Join Date
    Oct 2007
    Location
    Ohio
    Posts
    1,824
    Feedback Score
    14 (100%)
    Quote Originally Posted by SteyrAUG View Post
    Thread on three lug adapters simply become the new mounting point and they can come unscrewed as easily as a threaded mount suppressor. The only way you will gain any real advantage is if you permanently mount the three lug.

    With any thread on QD mount, you have to remember that it is still threaded on.
    If using a 3-lug adapter, it would be mounted using rockset. Does the 3-lug system require more torque force to mount/dismount the supressor vs. a traditional qd suppressor mount?
    "WINNING" - When all of the liberal democrats and other libtards start throwing themselves off cliffs because they don't get their way...

    JEDIsh: We are asked not to judge all muslims by the acts of a few extremists, but we are encouraged to judge all gun owners by extreme acts of the few.

  7. #7
    Join Date
    Jul 2009
    Posts
    19,745
    Feedback Score
    2 (100%)
    Quote Originally Posted by Singlestack Wonder View Post
    If using a 3-lug adapter, it would be mounted using rockset. Does the 3-lug system require more torque force to mount/dismount the supressor vs. a traditional qd suppressor mount?
    If using an adhesive you will largely solve the problem. 3 lugs don't require much torque at all.
    It's hard to be a ACLU hating, philosophically Libertarian, socially liberal, fiscally conservative, scientifically grounded, agnostic, porn admiring gun owner who believes in self determination.

    Chuck, we miss ya man.

    كافر

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •