Google is failing me, mainly because I can't find my scope listed. I need a Switchview for a Burris XTR ii 5x25. Does anyone with that scope and a set of calipers know what the ring diameter is?
Google is failing me, mainly because I can't find my scope listed. I need a Switchview for a Burris XTR ii 5x25. Does anyone with that scope and a set of calipers know what the ring diameter is?
Reads a lot, posts little.
I'd contact MGM and ask. The model isn't listed on their site, but I'd suspect it's the same as the other XTR ii series.
Sent from my iPhone using Tapatalk
I did and was told to measure with a caliper, which I lack right now.
Reads a lot, posts little.
"I have affixed a low cost switch view from MGM, and it actually works perfectly for the resistance the magnification ring offers."
If you can make contact with this guy (name at end of article): http://www.precisionriflemedia.com/a...25-rifle-scope
Burris tech spt: Technical Support at 1-888-228-7747
Or post question here (scroll to "ask a question on right side): http://www.burrisoptics.com/scopes/x...cope-5-25x50mm
I know nothing of Burris specs. You refer to the optic as "5x25". Is it actually 5-25x50mm? If so, here you go (more expensive): http://www.3gunstuff.com/?page_id=910
Last edited by bamashooter; 03-24-17 at 11:36.
For $20.... I've never used this before, but check it out. He's sending me one to evaluate soon. I prefer metal, but at 1/3 the cost... it looks decent.
http://mkmachining.com/product/burri...i-throw-lever/
Bamashooter, I have checked the spec sheets, called and emailed Burris. Nothing from them.
I'll get the other articles read later today.
Reads a lot, posts little.
Check out the one from 3 Gun stuff. I'm not affiliated with them, but have had two of their levers in the past and feel they make an excellent product. They also list your specific scope.
http://www.3gunstuff.com/?page_id=910
Steve
Disclaimer: I am employed by Shadow Systems. My posts on this site are my own and do not necessarily reflect the views of my employer.
I have found multiple references to the MGM lever installed to the XTR II. Just haven't found model No. I also found another Burris Q&A where question #10 that a 3gunstuff lever is being used in a video. Scroll to bottom. http://www.burrisoptics.com/scopes/x...lescope-1-8x24
I'd buy it and be done with it
Buy / borrow calipers
Take scope to machine shop for measurement
Measure with rule or make a template out of household items and measure with rule
Bookmarks