Results 1 to 6 of 6

Thread: "Aging" new parts for reto build

  1. #1
    Join Date
    Feb 2008
    Posts
    104
    Feedback Score
    3 (100%)

    "Aging" new parts for reto build

    I would like to hear everyone's thoughts and techniques for "aging" modern parts to go on retro builds .

  2. #2
    Join Date
    May 2014
    Location
    Georgia
    Posts
    317
    Feedback Score
    0
    1000 grit sand paper on corners of the surfaces that stick out the most if you don't like the thought of actually abusing the gun with dirt, mud, gravel, and shooting it
    "Guns are tools; people are the real weapons!"
    - Anonymous
    "The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it."
    - Albert Einstein
    “An armed society is a polite society.”
    - Robert Heinlein

  3. #3
    Join Date
    Feb 2008
    Posts
    104
    Feedback Score
    3 (100%)
    How about parts like the trigger guard and dust cover ? I dont plan on using all original parts due to the cost and this is more of a "fun" gun. But matching the original colors would be nice. I have heard of folks using scotch brite, steel wool and navel jelly, and possibly paint.

  4. #4
    Join Date
    Feb 2007
    Location
    Pensacola, FL
    Posts
    1,594
    Feedback Score
    1 (100%)
    Quote Originally Posted by colt191145lover View Post
    How about parts like the trigger guard and dust cover ? I dont plan on using all original parts due to the cost and this is more of a "fun" gun. But matching the original colors would be nice. I have heard of folks using scotch brite, steel wool and navel jelly, and possibly paint.
    Personally, I have used Gun Scrubber to hose down LPKs to get them to look gray. Afterwards, I hit the trigger with some steel wool to give it some wear. If you come across a repro A1 port door, you can hit it with Gun Scrubber and steel wool too. Black trigger guards can be a bit harder and you may have to use some naval jelly to get it to look gray. I have used the Gun Scrubber on black trigger guards and hit them with steel wool and it lightened them up a bit, but they were still darker than the XM Gray lower. If you are using black receivers, you can hit them with Gun Scrubber. Make sure they are dry and them hit them with some super fine steel wool. You can use the steel wool to get the desired color you are looking for, but it will still not match the XM Gray. Painting is not a good alternative as it can wear off. As far as aging or creating wear, use a fine grit sandpaper and make sure you hit the high spots on the parts like the receivers, charging handle, FSB, and FH.

    Here are some pics of my XM16E1 build. The receivers had fresh XM Gray anodizing on them and I went to work.









    Here is a pic of my A2 clone where I used a black PSA lower and worked on it so that it would closely match the dark gray A2 upper.







    Last edited by Renegade04; 03-22-17 at 17:46.
    "A Bad Day At The Range Is Better Than A Great Day Working"

    USMC Force Recon 1978-1984
    US Air Force Res. 1995-2004 (Air Transportation)
    M16/AR15 shooter since 1978, gun collector and AR builder since 2004

  5. #5
    Join Date
    Feb 2008
    Posts
    104
    Feedback Score
    3 (100%)
    Great info!
    My plan is to use a NoDak upper and lower and its the little parts im woried about. I appreciate all the advice.

  6. #6
    Join Date
    Jul 2009
    Posts
    33,884
    Feedback Score
    3 (100%)
    Quote Originally Posted by Renegade04 View Post
    Personally, I have used Gun Scrubber to hose down LPKs to get them to look gray. Afterwards, I hit the trigger with some steel wool to give it some wear. If you come across a repro A1 port door, you can hit it with Gun Scrubber and steel wool too. Black trigger guards can be a bit harder and you may have to use some naval jelly to get it to look gray. I have used the Gun Scrubber on black trigger guards and hit them with steel wool and it lightened them up a bit, but they were still darker than the XM Gray lower. If you are using black receivers, you can hit them with Gun Scrubber. Make sure they are dry and them hit them with some super fine steel wool. You can use the steel wool to get the desired color you are looking for, but it will still not match the XM Gray. Painting is not a good alternative as it can wear off. As far as aging or creating wear, use a fine grit sandpaper and make sure you hit the high spots on the parts like the receivers, charging handle, FSB, and FH.

    Here are some pics of my XM16E1 build. The receivers had fresh XM Gray anodizing on them and I went to work.









    Here is a pic of my A2 clone where I used a black PSA lower and worked on it so that it would closely match the dark gray A2 upper.







    Finally, a legit use for Gun Scrubber.

    I knew a guy who got a NIB M-10 years ago when they were still under $3k. He heard talk about how they could stand up to anything, were the AK of subguns, etc. and after shooting a few hundred rounds took it home and hosed it down with Gun Scrubber. The plastic back strap actually melted into goo and about 50% of the finish "bubbled." This was on a pre 86 vintage weapon mind you.
    It's hard to be a ACLU hating, philosophically Libertarian, socially liberal, fiscally conservative, scientifically grounded, agnostic, porn admiring gun owner who believes in self determination.

    Chuck, we miss ya man.

    كافر

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •