Light for SBR?

[Djstorm100]

I have a 11.5" 5.56 SBR with a BCM KMR 10" rail. I'm using a stubby bcm vertical grip, with a inforce on the 3'o clock of the rail (left hand shooter) However no matter what I do I can't get comfortable. So I'm looking for another possible light. The issue I have is when running the SBR my thumb falls in between the pic rail and light, so that my thumb is not on the switch. I have to adjust my support hand a little so my thumb can actively press the button.

[ggammell]

Find a light with a tape switch (i.e. Surefire scout) or change your light mount location to like 1:30.

[MisterHelix]

A Surefire X300U on top of the rail works pretty well on my 10.5" SBR's. Might be worth a try.

[bighawk]

You could get a Surefire M300/M600 with the tape switch or mount your WML on the top rail in front of your flip up sight.

I used this when I had an Inforce WML to fix that problem..

https://www.bravocompanyusa.com/BCMG...-1913lm-km.htm

[gunnerblue]

You could use a picatinny/keymod adapter (I believe arisaka makes one) and place the light in the 45 degree flat above your thumb. If your looking for other lights you could get a scout or scout-clone and mount it directly to the rail in the same place. Works for me

[officerX]

Rosch Works SLM1. http://www.roschworks.com/SLM1.php

[punkey71]

I have a 11.5" 5.56 SBR with a BCM KMR 10" rail. I'm using a stubby bcm vertical grip, with a inforce on the 3'o clock of the rail (left hand shooter) However no matter what I do I can't get comfortable. So I'm looking for another possible light. The issue I have is when running the SBR my thumb falls in between the pic rail and light, so that my thumb is not on the switch. I have to adjust my support hand a little so my thumb can actively press the button.

Have you tried running your inforce at 12 o'clock with a thumb-over grip?


Sent from my iPhone using Tapatalk

[scooter22]

M600 + Arisaka Inline Mount (@ 1100) + SR05/07 tape switch


Official Kremlin Transmission

[ResIpsa]

I have the same upper with the Arisaka KeyMod Inline Scout Mount (https://arisakadefense.com/collectio...t-mount-keymod) with their 300-series light mounted at the 1:30 position. The pictures on that page show how the light will look mounted on a KMR from the front and sides (very tight with the rail).

[MGWS]

Arisaka mount with 300 series light [URL="https://arisakadefense.com/collections/light-mounts/products/offset-scout-mount-keymod"]

No complaints.

KAC.JPGKAC2.JPG