Results 1 to 10 of 109

Thread: FN 509

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #34
    Join Date
    Feb 2012
    Posts
    10
    Feedback Score
    0
    I picked one up for $499 with the mail in rebate for 3 free magazines.. Couldn't pass up the deal. Initial impressions are good. The gun is built like a tank. The slide had some mass to it and the overall construction makes it seem like the gun was built for an extended life cycle shooting hotter than normal ammo.

    The gun feels good in the hand. The grip angle is nice and it points naturally for me. I wish the grip texture was a bit more "grippy" but overall not to bad. It has a nice undercut on the trigger guard which allows you to get pretty high up on the gun.

    The trigger, while a bit heavy, breaks clean and has a decent reset. The trigger actually feels lighter then what it measures and I contribute that to the fact that the trigger breaks farther forward then say and M&P.

    The magazine release is interesting. For some reason the button requires you to press it further on the left side of the gun then on the right side. At first I had some issues with the magazine dropping clean when using the left side magazine release. ( right hand shooter). I took the spring out of the magazine release which was really simple to do. It is kinda of an S shape spring. Looking over the spring I noticed that the ends of the spring had a slight bend to them. It seems this was done to allow the spring to compress a bit easier and not bind up. After playing with the angle of the spring a bit and placing it back into the gun, the magazine release works like a charm. Maybe it was binding up a bit from the factory.

    The stock sights are ok, nothing to write hope about. It's nice that it will take any Sig #8 sight so there are tons of options out there already.

    The barrel is interesting. There is slight tapper at the end to improve lock up. And it does lock up tight. It has a nice recessed crown and seems to be great quality. Accuracy has been above par when ranked against other guns of this type. The one thing that I really do not like is the short chamber. For whatever reason, the chamber in this gun is every bit as shot as my CZs. While most won't even notice this, bullet section when reloading now comes into play and you must find a bullet profile that will work, or load alot shorter then you normally would. I found that typical range ammo and HSTs had no problems but my reloads using delta precision HP had to be loaded quite a bit shorter.

    Recoil impulse is nice and soft. I saw a few comments where someone stated that the loads in the videos looked softer and dribbled out of the gun. Well, its more than likely not the loads as this gun is sprung. In my opinion, it is sprung way to heavy for 9mm. While it doesn't effect function, I think the shooting characteristics could be improved by tuning the recoil spring to the loads you shoot most often.

    Overall its a great gun. It is not ground breaking in anyway just another very competitive option. Will it replace everyone's glock? More than likely not.

    We are lucky enough to live in a time where we have options. There are a lot of great companies producing great products. With all of this competition, guns keep getting better and better. The FN 509 is an example of that. A solid entry into the polymer pistol market.
    Last edited by jrb1975; 08-04-17 at 12:45.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •