Polymer framed double stack cocked and locked 9mm's...

[dwhitehorne]

Don't forget the FNX. David

[MegademiC]

Delete

[17K]

M&P with a thumb safety count?

[1986s4]

M&P with a thumb safety count?

In my opinion yes. Without the safety I consider it a SAO with a lot of take up.

[call_me_ski]

I do not like the V1 safety levers on the Hk's. they are in the wrong place for me and I'm always causing the gun to decock and it digs in my thumbs.




Sent from my iPhone using Tapatalk

You can swap the detent plate on the HK USP pistols and it will disable the decock function of the levers. That way it will only function as a safety. The part is inexpensive; Only 9.95 from HKparts. It is an easy fix if that is your only complaint.

[Defaultmp3]

Does striker-fired really count as C&L?

I mean, y'all are counting M&Ps and XDs, I guess so, unless y'all also mean that it's a fully-tensioned striker. In that case, there's also:

• Sig P320/M17
• Ruger SR9/SR9c
• Ruger 9E
• Ruger American
• FN FNS-9/FNS-9C
• H&K SFP9/SFP9 SK
• Beretta APX
• Honor Defense Honor Guard
• Grand Power K100

[titsonritz]

In my opinion yes. Without the safety I consider it a SAO with a lot of take up.

Not a very accurate description.

[ralph]

You can swap the detent plate on the HK USP pistols and it will disable the decock function of the levers. That way it will only function as a safety. The part is inexpensive; Only 9.95 from HKparts. It is an easy fix if that is your only complaint.

Call HKUSA first, I bought some of those plates to make my HK45c a decocker, they're about $1.50 each from them, (if I remember correctly, anyway, they were inexpensive)but shipping is $10 for any order. Hk parts.net has always been way overpriced on parts, I'll use them only as a last resort.

[balance]

Grand Power K100.

[RHINOWSO]

Don't forget the FNX. David

But it's so forgettable.