Results 1 to 7 of 7

Thread: Light Hunter build

  1. #1
    Join Date
    Feb 2015
    Location
    Hueytown, Alabama
    Posts
    452
    Feedback Score
    3 (100%)

    Light Hunter build

    Been out of the game for a bit with wife and college and buying a house. Needed a rifle to hunt with ant to knock down anything bad coming in the yard. I have 40 acres behind me that is mine and I am out of city limits. All kinds of critters.

    She shoots fine. Haven't put it on a bench yet to check grouping, but function is fine. I have another build going on for an M4gery, so once that's completed, I'll be moving into a "higher tier" build for a battle rifle, using better parts and such, involving a BCM KMR and BA 18" Hanson.

    For now, this is what I needed.

    Upper:
    Spinta Precision Receiver
    Spinta Precision BCG
    Spinta Precision 16" 223 wylde light middy 1:8
    Standard Charging Handle, ejection port cover and forward assist
    12" Slim Keymod
    Phantom Flash Hider

    Lower:
    Anderson Stripped Lower
    Mil spec receiver extension, buffer and spring
    "Mil spec" parts kit

    Optics:
    Vortex Crossfire ii 2-7x35
    Burris PEPR



    Last edited by Jpoe88; 05-24-17 at 11:36.

  2. #2
    Join Date
    Jan 2017
    Location
    Grays Creek, NC
    Posts
    476
    Feedback Score
    1 (100%)
    Is that a VISM keymod handguard?
    DDM4V11 PRO, SSA-E, Vortex viper 6.5x20-44mm
    BCM 16 KMR-A, SSA, EO Tech EXPS 3-0, G-33 magnifier
    S&W M&P Sport II, BCM PNT, Aimpoint PRO
    BCM 9" 300 BLK upper/KAC lower/DD BCG/ BCM PNT/ Aimpoint T1
    Noveske upper/lower/handguard, 20" 6.5 Grendel Bartlein Barrel, SSA-E,Vortex viper GEN II PST 5x25-50mm
    16" BCA .223 Wylde "budget rifle", SPARC AR
    Retired Army Airborne Infantry

  3. #3
    Join Date
    Feb 2015
    Location
    Hueytown, Alabama
    Posts
    452
    Feedback Score
    3 (100%)
    Quote Originally Posted by hdrolling View Post
    Is that a VISM keymod handguard?
    Probably. Wasn't sure if I cared for a keymod rifle or not. Used to only have m4ish rifles. Got out of guns for a bit and tossed one together. Cheaply. It's got me back shooting. Im pulling the trigger on some decent parts this weekend for another build.

    I don't believe in "just as good" parts anymore. But to dial in, and plug one or two at Bambi this season, I am ok with the build. It'll be just fine until I have built "the rifle"
    Last edited by Jpoe88; 05-24-17 at 20:27.

  4. #4
    Join Date
    Jan 2017
    Location
    Grays Creek, NC
    Posts
    476
    Feedback Score
    1 (100%)
    Quote Originally Posted by Jpoe88 View Post
    Probably. Wasn't sure if I cared for a keymod rifle or not. Used to only have m4ish rifles. Got out of guns for a bit and tossed one together. Cheaply. It's got me back shooting. Im pulling the trigger on some decent parts this weekend for another build.

    I don't believe in "just as good" parts anymore. But to dial in, and plug one or two at Bambi this season, I am ok with the build. It'll be just fine until I have built "the rifle"
    Looks real good and functional, I'm partial to keymod and haven't seen this mount actually on a rifle. I like it!
    DDM4V11 PRO, SSA-E, Vortex viper 6.5x20-44mm
    BCM 16 KMR-A, SSA, EO Tech EXPS 3-0, G-33 magnifier
    S&W M&P Sport II, BCM PNT, Aimpoint PRO
    BCM 9" 300 BLK upper/KAC lower/DD BCG/ BCM PNT/ Aimpoint T1
    Noveske upper/lower/handguard, 20" 6.5 Grendel Bartlein Barrel, SSA-E,Vortex viper GEN II PST 5x25-50mm
    16" BCA .223 Wylde "budget rifle", SPARC AR
    Retired Army Airborne Infantry

  5. #5
    Join Date
    Jul 2016
    Location
    Alabama
    Posts
    120
    Feedback Score
    0
    Quote Originally Posted by Jpoe88 View Post
    Been out of the game for a bit with wife and college and buying a house. Needed a rifle to hunt with ant to knock down anything bad coming in the yard. I have 40 acres behind me that is mine and I am out of city limits. All kinds of critters.

    She shoots fine. Haven't put it on a bench yet to check grouping, but function is fine. I have another build going on for an M4gery, so once that's completed, I'll be moving into a "higher tier" build for a battle rifle, using better parts and such, involving a BCM KMR and BA 18" Hanson.

    For now, this is what I needed.

    Upper:
    Spinta Precision Receiver
    Spinta Precision BCG
    Spinta Precision 16" 223 wylde light middy 1:8
    Standard Charging Handle, ejection port cover and forward assist
    12" Slim Keymod
    Phantom Flash Hider

    Lower:
    Anderson Stripped Lower
    Mil spec receiver extension, buffer and spring
    "Mil spec" parts kit

    Optics:
    Vortex Crossfire ii 2-7x35
    Burris PEPR



    Nice hunting set up

  6. #6
    Join Date
    Sep 2017
    Posts
    25
    Feedback Score
    0
    looks really nice!

  7. #7
    Join Date
    Jul 2012
    Posts
    597
    Feedback Score
    4 (100%)
    Nice- how do you like that Vortex Crossfire and what have you compared it to?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •