Results 1 to 2 of 2

Thread: Semper Paratus Arms 3 Day AR15 Armorer Course Anchorage, AK November 2017

  1. #1
    Join Date
    Jan 2008
    Location
    AZ-Waging jihad against crappy AR's.
    Posts
    24,900
    Feedback Score
    104 (100%)

    Semper Paratus Arms 3 Day AR15 Armorer Course Anchorage, AK November 2017

    Semper Paratus Arms will be in Alaska doing a 3 Day AR15 Armorer Course with Anchorage PD. This course is currently only open to LE/MIL/GOV personnel only. **Subject to change**.

    This course will differ from previous courses in that day 3 will be lots of hands-on and diagnosing malfunctions, and conducting inspections.

    Course registration and payment will be conducted through Semper Paratus Arms-http://www.semperparatusarms.com/cou...-registration/

    Dates: November 14-16 2017
    Time: 0900-1700 (Approx.)
    Location: Anchorage Police Dept.
    3760 W. Dimond Blvd.
    Anchorage, AK



    Cost: 350.00

    STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.

    Additionally there is a new "minimalist" tool kit for the course.

    All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.


    The complete kit is only necessary for those building a weapon during the course.

    Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
    Complete set of roll pin holders
    Complete set of roll pin punches
    1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
    Small to medium pair of needle nose pliers
    Large flat tip screwdriver or variable tip screwdriver set
    Bolt Catch Pin Punch
    Pivot Pin Installation Tool
    Note taking material

    Minimalist Tool List

    Glock Punch
    1" Nylon and Brass gunsmithing hammer- Part# 818-600-100WB
    6" flat tip screwdriver or correct allen wrench for grip screw
    Pivot pin installation tool- Part# 080-216-011WB
    1/16 flat punch (Starrett is recommended)


    Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......

    Overview

    This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....

    Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.

    The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

    TD 1

    -Introduction to the AR15 platform, its history, and cycle of operation
    -Parts breakdown and nomenclature
    -Tool and equipment selection as well as proper usage
    -Basic disassembly and reassembly (upper and lower)

    TD 2

    -Overview of TD 1
    -Inspection criteria
    -Troubleshooting and malfunctions
    -Maintenance
    -Complete and detailed disassembly and assembly of weapon

    TD3

    -Assembly/Disassembly of weapons
    -Diagnosing Malfunctions
    -Conducting Inspections
    -Repairs to individual weapons
    -Written test and certificate issuance

    Instructor Bio

    This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.



    Owner/Instructor at Semper Paratus Arms

    Facebook: https://www.facebook.com/SemperParatusArms/

    Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/

    M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141

    Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com

  2. #2
    Join Date
    Jan 2008
    Location
    AZ-Waging jihad against crappy AR's.
    Posts
    24,900
    Feedback Score
    104 (100%)
    This course is currently at 50% full with slot pending to other agencies. If you are contemplating getting in, don't waste time.



    Owner/Instructor at Semper Paratus Arms

    Facebook: https://www.facebook.com/SemperParatusArms/

    Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/

    M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141

    Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •