Wow...the instructions..wasn't really expecting all that, lots to read.
I don't have a trigger pull gauge here so just had to wing it by feel in terms of setting up the weight of first and second stage pull.
Why do they say not to set the pull weight with the Giessele pins in?
I had to remove a lot of material from the ambi safety of the colt...It I had to widen it by about .002-.003", and it was also a little to thick, so had to reduce the thickness from about 0.0235" to 0.0230", removing material from the flat area the instructions specifically said not to remove material from. Im assuming that won't be a problem, as I measured a couple of safeties from some other triggers and they were all around that thickness in that area (0.0230 "or so).
Bookmarks