Page 1 of 2 12 LastLast
Results 1 to 10 of 24

Thread: Turning 6p into WML

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2015
    Posts
    74
    Feedback Score
    0

    Turning 6p into WML

    So I have a couple of old Original Surefire 6p's. Out of curiosity, I put a cheapo $7 Cree Led drop-in I bought from Ebay into one. It is nice and bright, but I haven't had the desire to mount it on the AR and attempt to run it hard.

    I have another 6p that is bone stock. I would like to upgrade this one and put it on the AR. Would me upgrading to a Malkoff drop in be all that is needed? Would the original head(minus the incandescent bulb) be just fine for weapons use? I know the body would be fine, but would the original momentary on/twist for constant on, tailcap be fine for hard weapons use?

    Hoping somebody could clear this up. Sorry if this has been hashed before, I searched some pages back, and it seems like the x300 style or scout is the popular choice. I just like the option that if I were to use a mounted handheld, I could remove it from the rifle and it have dual use if I wanted to put it by the bedside or even in the glovebox.

  2. #2
    Join Date
    Sep 2011
    Location
    #FreeKekistan
    Posts
    3,291
    Feedback Score
    0
    I have an old G2 with malkoff device mounted to my Stag and it works just fine. I did switch to a clicky tail cap for convenience of constant on when needed. This set up is perfectly serviceable if the need were to arise that I had to use that rifle in a self defense scenario.

    It's not the latest High Speed Low Drag set up that SEAL Team Delta 6 is running but it is serviceable.
    If you can't win a gun fight against a lightly-trained individual during broad daylight with 88 rounds of 30-06, I'm not sure you'd be able to do it with... any other firearm.
    -Fjallhrafn
    Ok, I've got an El Camino full of rampage here, so what's the plan?

  3. #3
    Join Date
    Dec 2011
    Location
    Texas
    Posts
    198
    Feedback Score
    0
    I have the G2 with the Malkoff drop in. Been a good set up. I stuck with the momentary switch. I have rifles set up with clicky and momentary, have seen pros and cons in training with both set ups.

  4. #4
    Join Date
    Apr 2007
    Location
    Texas
    Posts
    11,471
    Feedback Score
    46 (100%)
    I probably have 4 or 5 of the old Surefire 6P lights with a Malkoff M61 drop in. They have a lot of spill, and no deadspots. Gene Malkoff makes great stuff, and they are on sale for $39 bucks right now. I just picked up another.

    A recycled 6P with a Malkoff LED makes for a tough beater light.

  5. #5
    Join Date
    Jun 2015
    Posts
    74
    Feedback Score
    0
    Quote Originally Posted by SeriousStudent View Post
    I probably have 4 or 5 of the old Surefire 6P lights with a Malkoff M61 drop in. They have a lot of spill, and no deadspots. Gene Malkoff makes great stuff, and they are on sale for $39 bucks right now. I just picked up another.

    A recycled 6P with a Malkoff LED makes for a tough beater light.
    Exactly what I wanted to hear. Thanks for the replies fellas.

  6. #6
    Join Date
    Aug 2009
    Location
    Southeast
    Posts
    840
    Feedback Score
    17 (100%)
    Quote Originally Posted by SeriousStudent View Post
    I probably have 4 or 5 of the old Surefire 6P lights with a Malkoff M61 drop in. They have a lot of spill, and no deadspots. Gene Malkoff makes great stuff, and they are on sale for $39 bucks right now. I just picked up another.

    A recycled 6P with a Malkoff LED makes for a tough beater light.
    I have a couple of these and they work great.

  7. #7
    Join Date
    Aug 2006
    Location
    USA (Washington DC/Northern Virginia)
    Posts
    766
    Feedback Score
    0
    I also still use the Surefire 6P/G2 lights with Malkoff LED bulbs (and stock Surefire on off switches).

    You should consider using a "warm" tint Malkoff LED, like their M61W. I think "W" in the model # means warm tint.

    When you fire a few shots, there will probably be a LOT of smoke, especially if indoors. The vast majority of LED bulbs have a blue/white tint. My understanding is that it is good for increasing the LED lumen rating. But from my limited experience, those LED bulbs also create a surprising amount of glare with the smoke from gunfire (even just a few shots). Some brands are worse than others.

    With the warm tint bulbs that are sold by Malkoff, you can minimize this glare and see much better. It's the same concept as having yellow fog lights on a vehicle.

    Even without smoke from gunfire, you can usually see details better with a warm tint bulb (despite the lower lumen ratings).

    I have no ties or relationship to Malkoff. But I think they make the only "warm" color ones for Surefire.

    I hope this helps.

    Joe Mamma
    "Reliability above all else"
    NRA Certified Pistol and Rifle Instructor, Life Member
    Glock Certified Armorer
    Beretta & Sig Sauer Certified Pistol Armorer
    Colt Certified 1911 & AR-15/M16/M4 Law Enforcement Armorer

  8. #8
    Join Date
    Feb 2010
    Posts
    1,670
    Feedback Score
    29 (100%)
    Quote Originally Posted by SeriousStudent View Post
    I probably have 4 or 5 of the old Surefire 6P lights with a Malkoff M61 drop in. They have a lot of spill, and no deadspots. Gene Malkoff makes great stuff, and they are on sale for $39 bucks right now. I just picked up another.

    A recycled 6P with a Malkoff LED makes for a tough beater light.
    Where are you finding 6P's for $40? I find them on amazon for $70, and a few places at $60, but not $40.

    I am still kicking myself for not picking up a half dozen when I saw them on amazon for $27 a light shipped. Alas, I only have one.
    Quote Originally Posted by Coal Dragger View Post
    Marines love CLP. Chow, libo, pussy.

    Beyond that everything else is a crap shoot.

  9. #9
    Join Date
    Apr 2012
    Posts
    795
    Feedback Score
    6 (100%)
    Quote Originally Posted by nimdabew View Post
    Where are you finding 6P's for $40? I find them on amazon for $70, and a few places at $60, but not $40.

    I am still kicking myself for not picking up a half dozen when I saw them on amazon for $27 a light shipped. Alas, I only have one.
    I think he means the Malkoff head, not the 6P.

    That said, I almost always buy used 6Ps or G2s when I see them for sale on a forum. Usually around $35-40. That way I don't feel bad when I gut it.

  10. #10
    Join Date
    Aug 2017
    Posts
    17
    Feedback Score
    0
    Quote Originally Posted by nimdabew View Post
    Where are you finding 6P's for $40? I find them on amazon for $70, and a few places at $60, but not $40.

    I am still kicking myself for not picking up a half dozen when I saw them on amazon for $27 a light shipped. Alas, I only have one.
    http://www.illumn.com/surefire-6p-or...batteries.html

    I just picked up 2 of these for $80 shipped TYD.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •